Implementing Cisco Data Center Core Technologies (350-601 DCCOR)

Question 1

Refer to the exhibit. An engineer must configure a Fibre Channel device alias named TEST for a device attached to port fc1/9 of a Cisco Nexus Series Switch. Which command set completes the configuration?

A. SITE-A-MDS-Fabric-A# configure terminal
SITE-A-MDS-Fabric-A (config)# device-alias database
SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn
50:00:14:42:d0:0 c:f5:20
SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commit

B. SITE-A-MDS-Fabric-A# device-alias database
SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn
50:00:14:40:47:b0:0 c:f5
SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commit

C. SITE-A-MDS-Fabric-A# configure terminal
SITE-A-MDS-Fabric-A (config)# device-alias database
SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn
50:00:14:42:d0:0 c:f5:20
SITE-A-MDS-Fabric-A (config-device-alias-db)# exit

D. SITE-A-MDS-Fabric-A# configure terminal
SITE-A-MDS-Fabric-A (config)# device-alias database
SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias name TEST pwwn
50:00:14:40:47:b0:0 c:f5
SITE-A-MDS-Fabric-A (config-device-alias-db)# device-alias commit

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 2

An engineer is using REST API calls to configure the cisco APIC. Which data structure must be used within a post message to receive a login token?

A. {aaaUser:{attributes:{name:apiuser,pwd:cisco123}}}

B. <aaaUser><name="apiuser"/><pwd="cisco123"/></aaaUser>

C. {"aaaUser":{"attributes":{"name":"apiuser","pwd":"cisco123"}}}

D. <aaaUser><name>apiuser</name><pwd>cisco123</pwd></aaaUser>

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 3

Which three options are benefits of the vPC peers switch feature? (Choose 3)

A. It improves convergences for Layer 3 flows.

B. It simplifies STP configuration by configuration both vPCs with the same STP priority.

C. It eliminates the recommendation to pin the STP root to the vPC primary switch.

D. It allows a pair of the vPC peer devices to appear as a single STP root in the Layer 2.

E. After the peer link comes up, it performs an ARP bulk sync over CFSoE to the peer switch.

Correct Answer: A,C,D

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 4

Drag and Drop Question
Drag and drop the steps on the left onto the order that they must be implemented on the right to recover a fabric interconnect when there is no working image on the bootflash.

Correct Answer:

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCS Troubleshooting_chapter_01010.html

Question 5

What happens when the install all epld bootflash: m9000-pkg2-9.2.2.epld module all fan- module all bar all command is run on the Cisco MDS 9000 Series Director Switch?

A. The switching module starts a rolling update.

B. Fan modules power cycle.

C. Each module updates and power cycles.

D. The active supervisor updates first.

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 6

An engineer must affirm the identity of the Cisco UCS Manager after a valid CA-signed keyring for HTTPS access is created.
Which action completes the configuration?

A. Implement SSLv3

B. Set Cipher Suite Mode

C. Enable TLSv1.2

D. Create a trusted point

Correct Answer: D

Question 7

Drag and Drop Question
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right

Correct Answer:

Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/san-os/quick/guide/qcg_zones.html#wp1102199

Question 8

Refer to the exhibit. An engineer must deploy 70 Cisco Nexus 9000 Series Switches in a new environment. The requirement is to use Cisco DCNM as a management tool to deploy, manage and monitor the new switches. In addition. DCNM is configured with a zero-touch POAP feature to facilitate fabric creation.
Which action meets these requirements?

A. Create common credentials on all of the new Nexus switches

B. Create a SPAN session on the management switch to send the traffic from VLAN 10 to Ethernet
1/1.

C. Configure SNMP on the new Nexus switches to send SNMP messages to the DCNM server

D. Configure an IP helper address on interface VLAN 10 of the management switch

Correct Answer: D

Question 9

An engineer must configure a VDS port group using APIC policy. The requirements are for the frames to be mapped to a particular Layer 2 network and for the virtual machine assigned to the port group to receive all frames passed on the virtual switch.
Which two settings must be used to meet these requirements? (Choose two.)

A. VMDirectPath

B. VLAN

C. forged transmits

D. promiscuous mode

E. port binding

Correct Answer: B,D

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 10

Refer to the exhibit. The ASA 1 acts as a Layer 3 gateway for all servers.
The servers lose the gateway connectivity when the vPC peer links go down and the vPC keepalive remains up.
Which action improves the high availability in the network?

A. Activate the vPC orphan-port suspend feature on the switch ports connected to the firewall

B. Create a static port channel with two links from each firewall to the switch

C. Enable the vPC peer gateway feature on the vPC devices

D. Implement the IP reoVect feature on the vPC devices

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 11

Refer to the exhibit. An engineer must implement VXLAN with anycast gateway. To accomplish this, an engineer must set up PIM Source-Specific Multicast for host reachability.
Which IP address must be applied to interface loopback1 to accomplish this goal?

A. 10.255.0.100

B. 10.10.0.2/32

C. 255.0.0.1/8

D. 10.10.0.1/32

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 12

Refer to the exhibit. Users report SAN traffic packet loss on a blade server that is managed by using Cisco UCS Manager. An engineer must implement a SPAN feature to an external Fibre Channel analyzer.

Which configuration source in the TEST monitoring session must the engineer select?

A. all the virtual host bus adapters from the server

B. all the storage ports

C. all the VSANs from the server

D. all the uplink Fibre Channel ports

Correct Answer: A

Question 13

An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image. What is expected to occur in this case?

A. The system defaults to and boots into GOLD firmware image

B. The system defaults to the GOLD firmware image

C. The system defaults to the backup image version

D. The system defaults to and boots into kickstart image

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Cisco Implementing Cisco Data Center Core Technologies (350-601 DCCOR) - 350-601 Exam Practice Test

Latest Update

Useful Links

Contact Us