Huawei HCS - Transmission - H35-260 Exam Practice Test

A. True

B. False

A. Ingress PE to egress PE routing information exchange

B. Local CE to ingress PE routing information exchange

C. Ingress PE to P routing information exchange

D. Egress PE to egress CE routing information exchange

A. The network element is located at the SDH/PDH boundary

B. The NE clock works in hold mode

C. There is a phase difference between the network element clock and the network clock

D. The frequency difference between the network element clock and the network clock

A. The optical fiber is connected incorrectly. The wavelength of the WDM side port of the OTU board is inconsistent with the wavelength of the optical crossover.

B. The fiber attenuation between the TDC and RDC ports of the OAU board is too large

C. Network layer OTS path is missing

A. 190.136.3.14 and 190.136.3.15

B. 100.1.2.64 and 100.1.2.65

C. 171.168.1.4 and 171.168.1.5

D. 192.168.5.33 and 192.168.5.34

A. Complete ODU1 Path

B. Complete OMS Path

C. Complete OCH Path

D. Complete OSC path

A. DNI-PW can only be used to transmit base station traffic

B. The existing network is generally not linked with MCLAG

C. 1+1 mode is not supported

D. DNI-PW supports multi-hop, but single-hop PW is recommended for service deployment

A. FEU board IN/OUT port

B. M40V board OUT port

C. OTU unit line side port

D. The OUT port of the OAU1 board

A. Connection-Oriented Control Plane

B. Connectionless-oriented forwarding plane

C. Connection-Oriented Forwarding Plane

D. Connectionless-oriented control plane

A. MC-PW APS

B. IP/VPN FRR

C. VPN FRR

D. MC-LAG