HPE Campus Access Switching Expert Written Exam

Question 1

Drag and Drop Question
Identify the required configuration steps to enable DHCP Endpoint Profiling with HPE Aruba Networking ClearPass. (Not all will be used)

Correct Answer:

Question 2

An OSPF router has learned a path to an external network by both an E1 and E2 advertisement, both routes having the same path cost.
Which path will the router prefer?

A. The router will use both paths equally my means of ECMP.

B. Both routes will be suppressed until the path conflict has been resolved.

C. The router will prefer the E1 path.

D. The router will prefer the E2 path.

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 3

A customer tasked you with creating a new design for the IDFs in a large office building. A junior member of your staff took all of the technical requirements and produced a design to meet those requirements. You were asked to review the portion of the design below:
CUSTOMER REQUIREMENTS:
preference for stackable switches

Each closet should contain a single virtual switch.

dual 10Gbps fiber uplinks from each closet

capacity for 500 edge ports in each closet; no additional capacity required

lowest-cost AOS-CX switch that meets all requirements

PROPOSED DESIGN:
nine (9) AOS-CX 6200M (R8Q69A: Class4 PoE 4SFP+ switch (R8Q68A) HPE Aruba

Networking 6200M 46G 4SFP+ switch) in each closet
switches configured in a VSF (Virtual Switching Framework) stack, with auto-stacking enabled

uplinks configured on the first and last members of the stack

Does the proposed solution meet the technical requirements?

A. No. The proposed design does not meet the requirements for uplink connectivity.

B. No. The proposed design is not the lowest-cost AOS-CX switch for this project.

C. Yes. The proposed design meets the customer's requirements.

D. No. The proposed design does not meet the capacity requirements.

Correct Answer: D

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 4

A client would like to use the HPE Aruba Networking Switch MultiEdit Software function in HPE Aruba Networking Central.
Which option is available?

A. Use templates and apply them to selected switches.

B. Run the same NAE scripts for selected switches.

C. Use CLI scripts and apply them to selected switches.

D. Apply a configuration to an interface range for selected switches.

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 5

You are about to deploy a gateway that is on factory default. ZTP cannot be used for different reasons, but you are searching for valid alternatives. What are two valid alternatives for ZTP?
(Choose two.)

A. Use OTP by connecting to port 0/0/1, and use a Web browser to complete provisioning.

B. Use OTP by connecting to port 0/0/1 with a static IP, and use a Web browser to complete provisioning.

C. Use OTP by connecting to console port, and use terminal software provisioning. "Static-Activate" should be used.

D. Use OTP by connecting to port 0/0/0, and use a Web browser to complete provisioning.

E. Use OTP by connecting to console port, and use terminal software to complete provisioning. "Full- Setup" should be used.

Correct Answer: D,E

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 6

To ensure device redundancy in an HPE Campus Access network, which configurations should be applied?

A. VRRP

B. DHCP Snooping

C. Active-Active Failover

D. Link Aggregation

Correct Answer: A,D

Question 7

What is the best practice for using Dynamic Segmentation?

A. Use a combination of role-based access and overlay technologies to create a layered security approach

B. Use UBT to create isolated networks for specific types of devices.

C. Use LUR to assign roles to devices based on their location and DUR to assign roles to devices based on their user identity.

D. Use Dynamic Segmentation only on devices that are connected to the network via Wi-Fi.

Correct Answer: A

Question 8

Refer to the exhibit.

After implementing a distributed overlay with distributed anycast gateways, you noticed that too many ARP packets are being replicated to every access (leaf) switch.
Which command can you use to optimize the network?

A. evpn ip proxy-arp

B. interface vlan 10 ip proxy-arp interface vlan 11 ip proxy-arp

C. vlan 10 arp-suppression vlan 11 arp-suppression

D. evpn arp-suppression

Correct Answer: D

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 9

Refer to the exhibit.

R1 has not learned OSPF routes from a directly connected neighboring router. Based on the exhibit's show command output, which statement describes a misconfiguration that would cause the router's neighbor state to remain stuck at 2-WAY/DROther?

A. There is an L2 interface MTU mismatch.

B. Both router's OSPF priority are set to 0.

C. The other router's directly connected interface is not attached to the default VRF.

D. There is a hello timer mismatch.

Correct Answer: B

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 10

The customer is experiencing periodic uplink congestion between campus-1's AGG-1 and core.
This has been negatively affecting voice communications. The VoIP phones edge mark packets with DSCP EF. The uplink from AGG-1 to core is LAG1.
The customer has already configured the following class and policy on AGG-1:

Based on this policy, which script, when deployed on AGG-1, will improve the reliable forwarding of voice traffic between AGG-1 and its uplink to the core?

A.

B.

C.

D.

Correct Answer: D

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

HPE Campus Access Switching Expert Written - HPE7-A06 Exam Practice Test

Latest Update

Useful Links

Contact Us