NetApp Certified Implementation Engineer - SAN, ONTAP

Question 1

Exhibit.

The host in the exhibit is connected to a 4-node ONTAP SAN using dual-fabric implementation. LUNs have been mapped LUN through all available UFs on nil (our nodes. Switch 2 is powered off for high-availability testing.
How many paths per LUN would you expect the host to see in this scenario?

A. 2

B. 4

C. 8

D. 6

Correct Answer: B

Question 2

An administrator is configuring their existing Ethernet network switches to provide ISCSI LUNs to several servers. The network switches are also used for other traffic from various hosts. In this scenario, which statement is true?

A. Increase the ratio of access ports to trunk ports to 2:1

B. Configure the MTU size to be larger on the switch and storage than on the host.

C. Use multiple VLANs to isolate traffic from other network traffic

D. Netapp recommends using the same LIFs for NFS and ISCSI traffic

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 3

Which configuration for primary block (FC and iSCSI) data does NetApp best practices recommend? (Choose two.)

A. single controller multiple shelves

B. single controller single shelf

C. dual controller single shelf

D. dual controller multiple shelves

Correct Answer: C,D

Question 4

Which option needs to be set on a volume to guarantee that it cannot be affected by other volumes?

A. Space Reserved

B. Reservation Enabled

C. Volume

D. None

Correct Answer: C

Question 5

You are configuring a Windows Server 2019 system to attach to an ISCSI presented LUN. There are multiple physical paths from the Windows Server to the Netapp Cluster. Which two changes are required to the Windows Server to enable multipath? (choose two)

A. Enable MPIO by selecting the option in the MPIO properties administrative application

B. Select the "enable multi-path" checkbox on the ISCSI software initiator

C. Add an Ethernet network adapter

D. Add a converged network adapter (CNA)

Correct Answer: A,B

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 6

Which tool collects configuration data from hosts and switches to assist in evaluating a qualified configuration?

A. sysstat. command

B. System Manager

C. OneCollect

D. SnapCenter

Correct Answer: C

Question 7

You are configuring FC ports on front-end SAN switches for a 4-node Metrocluster configuration across two data centers. You need to ensure that each data center serves FC LUNs when an FC port goes offline in one data center. In this scenario, which front end switch setting must be modified to avoid overlap when a new port comes online?

A. NPIV reject

B. ANA mapped

C. WWNN reject

D. WWPN reject

E. NPIV enabled

Correct Answer: E

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 8

Which data collection tool would be used for obtaining detailed information about hosts that are attached to ONTAP storage?

A. Conflg Advisor

B. Upgrade Advisor

C. Brocade Network Advisor

D. OneCollect

Correct Answer: D

Question 9

You are asked to serve iSCSI LUNs in an existing SVM on your AFF A220 using ONTAP 9.5. You verified that the iSCSI license is configured on your cluster and that the iSCSI protocol is enabled.
Referring to the exhibit, what is needed to allow hosts to log into the iSCSI target?

A. Add iSCSI to the data protocol of the existing LIFs.

B. Create new LIFs with the iSCSI data protocol.

C. Map LUNs to the igroups.

D. Create new igroups with the host IQNs.

Correct Answer: C

Question 10

Exhibit.

You want to map a LUN to a server.
To which SAN object is the highlighted value in the exhibit added?

A. igroup

B. FlexClone

C. LUN

D. fabric zone

Correct Answer: A

Question 11

Which resource would you use to verify whether a specific SAN configuration is supported by NetApp?

A. SAN Configuration Guide

B. Hardware Universe (HWU)

C. Interoperability Matrix Tool (IMT)

D. Active IQ

Correct Answer: A

Question 12

Which type of multipathing does Linux support?

A. dsm

B. mpio

C. mcs

D. dm_mp

Correct Answer: D

Question 13

A customer has an AFF A700 connected to a Cisco switch and has verified connectivity but cannot see any LUNs. The customer issued the run -node scaling-01 -command fcp topology show command to verify the connection.
Referring to the exhibit, what needs to be enabled on the Cisco switch?

A. VFC needs to be enabled.

B. Trunking needs to be enabled.

C. VSAN needs to be enabled.

D. NPIV needs to be enabled.

Correct Answer: A

Question 14

Exhibit.

An administrator has an AFF A200 HA pair.
Referring to the exhibit, how many 10 Gbps connections would the customer have on a single node for SAN host connectivity?

A. 2

B. 7

C. 4

D. 6

Correct Answer: C

Question 15

A customer is using both FC and NVMe in a cluster. The customer needs to do some work on AFF_1.
Referring to the exhibit, what will happen?

A. The FC LUNs on node AFF_2 will be unavailable after failover of AFF_1.

B. The FC LUNs that use cluster interconnect to access the LUNs on AFF_1 will be unavailable after failover.

C. The NVMe namespaces on AFF_1 will be unavailable after takeover by AFF_2.

D. The NVMe namespaces on AFF_2 will be available after takeover of AFF_1.

Correct Answer: A

Network Appliance NetApp Certified Implementation Engineer - SAN, ONTAP - NS0-520 Exam Practice Test

Latest Update

Useful Links

Contact Us