Microsoft Enterprise Voice & Online Services with Microsoft Lync Server 2013 Sample Questions:

1. You have a Lync Server 2013 infrastructure. You have one Enterprise Edition pool named pool1. contoso.com. Enterprise Voice is enabled for all users. You have a PSTN gateway named mg1.contoso. com that does not support secure signaling. The Encryption support level of the global trunk configuration is set to Not Supported. You add a second PSTN gateway named mg2.contoso.com. The SIP General parameters for mg2.contoso.com are configured as shown in the following table.

On mg2.contoso.com, you generate and install a certificate from an internal certification authority (CA). You need to ensure that Lync Server 2013 can use both PSTN gateways to make calls on the PSTN. Which four actions should you perform? To answer, move the four appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

2. You purchase a Microsoft Office 365 subscription and configure the pilot users to use the @contoso.
onmicrosoft.com UPN suffix. You need to ensure that the pilot users can perform the following actions:
Join meetings.
Use a SIP address that has the @online.contoso.com suffix. Communicate with users who are hosted on
Lync Server 2013. Which three tasks should you perform? (Each correct answer presents part of the
solution. Choose three.)

A) From the Lync Server Control Panel, set up federation to online.contoso.com.
B) From the Lync Online Control Panel, update the SIP addresses of the users to @online.contoso.com.
C) From the Lync Online Control Panel, set up federation to contoso.com.
D) From the Lync Server Control Panel, update the user SIP addresses of the users to @online.contoso. com.
E) From the Lync Server Control Panel, set up federation to contoso.onmicrosoft.com.

3. You need to recommend which Lync Server 2013 solution must be deployed to the New York and Montreal offices to support the planned changes. The solution must meet the business goals.
What should you recommend? (To answer, select the appropriate components for each office in the answer area.)
Hot Area:

4. Your company has a main office and a branch office.
The offices connect to each other by using a WAN link. The WAN link has limited bandwidth and
experiences packet loss.
The branch office contains several users only.
You have a Lync Server 2013 infrastructure.
You identify the bandwidth requirements for the codecs as shown in the following table.

Some users in the branch office report that they experience very slow access to shared folders in the main
office.
Some users in the branch office report that they experience very slow access to shared folders in the main
office.
You need to create a bandwidth policy that meets the following requirements:
-Uses the least amount of bandwidth for audio calls.
-Minimizes the impact of packet loss on audio call quality.
-Supports up to 10 concurrent audio calls from the branch office users to the users in the main office.
How should you configure the bandwidth policy? (To answer, select the appropriate audio limit and audio session limit in the answer area.)
Hot Area:

5. You have a Lync Server 2013 infrastructure that has Enterprise Voice enabled. You need to ensure that users can place a call on hold, and can then retrieve the call later by dialing a number from any phone. The solution must ensure that if a call is on hold for four minutes, the call is automatically forwarded to the receptionist. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A) Modify the global voice policy.
B) Create a static route.
C) Create a Call Park orbit.
D) Modify the Call Park settings.
E) Modify the global dial plan.

Solutions: