Avaya Ethernet Routing Switch Implementation and Maintenance Exam

Question 1

In a multicast
campus, when
should
the
PIM
interface in passive
mode
be configured?

A. When more than one multicast routing protocol is in use

B. When PIM control traffic must be passed

C. When there are no unicast routing paths

D. When the ERS 8600 is used as an edge switch and is aggregating end users

Correct Answer: D

Question 2

The SNMP counters check for authorization failures and other types error conditions. Which of these SNMP error conditions is displayed in Enterprise Device Manager?

A. In Bad Community Names counters

B. Fan Failure packet counters

C. PCAP packet capture counters

D. Power Supply Failure packet counters

Correct Answer: D

Question 3

The Ethernet Routing Switch (ERS) 8600 supports the feature IP VPN-Lite that does not require the use of an MPLS network. Which function does the ERS 8600 as a Provider Edge (PE) perform for IP VPN-Lite?'

A. The PE incorporates Label Distribution Protocol across the core network to connect remote PE devices.

B. The PE uses the Virtual Routing Forwarding (VRF) instances to provide traffic separation.

C. The PE provides route exchange with remote PE devices using OSPF.

D. The PE adds a shim header to the Ethernet header specifying which network the packet is crossing.

Correct Answer: B

Question 4

Traceroute allows a route to be traced to a network using an Ethernet Routing Switch (ERS) 8600 CLI command. How could you use it to limit the number of hops the traceroute reports?

A. Configure the -q (number of probes per TTL) to the number maximum number of hops.

B. Configure the -P (base UDP port) to the number of maximum number hops.

C. Configure the -w (wait time per probe) to the number of maximum number of hops.

D. Configure the -m (maximum TTL value) to the number of maximum number of hops.

Correct Answer: D

Question 5

A technician discovers that an Ethernet Routing Switch (ERS) 8300 cat5e copper link is intermittent. The link connects a distant workstation to 8348GTX port 6/2. The cable path is undetermined at this point and it is suspected to traverse many patch panels. How can the
ERS 8300 Time Domain reflectometer tool be of help in this situation?

A. The Virtual Circuit Detect command config ethernet 6/2 vct detect can detect how many patch panels are used between the device and switch and provide a percentage of dropped packets.

B. The Virtual Circuit Echo command config ethernet 6/2 vct echo can detect the bad cable pairs only when connected to another ERS 8300.

C. The virtual circuit Repair command config ethernet 6/2 vct repair can detect the bad cable pairs and repair the cable by moving data to the good cable pairs.

D. The Virtual Circuit Test command config ethernet 6/2 vct test can detect opens, shorts, bad terminations.

Correct Answer: D

Question 6

Which
command
mode contains
the
commands
needed to work on software licenses?

A. Software Configuration

B. User Exec

C. Privileged Exec

D. Global Configuration

Correct Answer: B

Question 7

An Information Technology organization needs to
determine whether they should upgrade their existing Routing Switch (ERS) 8600 switches to release 5.0. Each chassis currently has both 8648GTR 8648TX modules. One of the features that the company requires is the ability to perform port mirroring on multiple ports per module
at a time.
What
should be done to meet
their port mirroring requirement when upgrading to software release 5.0?

A. Upgrade to ERS 8600 Release 5.0 without any hardware upgrade.

B. Recommend other means to capturing traffic.

C. Replace the existing
8648TX modules
with ERS 8648TXE
for egress mirroring.

D. Replace the existing modules with 8648GTRS modules,

Correct Answer: D

Question 8

The
IEEE 802.1aq virtualized service standard supports two
modes
of operation for the implementation of shortest path Bridging. Which mode is supported in the Avaya VENA Enterprise Fabric solution?

A. Shortest Path Bridging Mac-In-Mac (SPBM)

B. Shortest Path Bridging SID (SPBS)

C. Provider link state bridging (PLSB)

D. Shortest Path Bridging VID (SPBV)

Correct Answer: D

Question 9

Based on the command line output shown in the exhibit, how many Gigabit Ethernet ports are available on this Ethernet Routing SwitchlT (ERS) 8600?

A. 26

B. 16

C. 28

D. 24

Correct Answer: B

Avaya Ethernet Routing Switch Implementation and Maintenance - 3605 Exam Practice Test

Latest Update

Useful Links

Contact Us