Nokia SR Linux EVPN and Data Center Interconnect - 4A0-D03 Exam Practice Test

A. The leaf's underlay autonomous system number is used for the route reflector EVPN peering sessions.

B. If redundant route reflectors are deployed, the client leaf routers will receive duplicated updates.

C. The cluster-id that uniquely identifies the route reflector is only configured on the route reflector itself.

D. A second route reflector can be deployed for redundancy purposes.

A. All routers participating in the Ethernet segment must have the multi-homing mode set to all-active.

B. The centralized router will advertise the customer prefixes using an EVPN route-type 5 update.

C. Remote leaf routers can load balance traffic to customer prefixes through the leaf routers connected to the Ethernet segment.

D. The centralized router must be a member of the Ethernet segment.

A. AD per ES routes

B. IP/MAC routes

C. AD per EVI routes

D. Ethernet segment routes

A. The IP addresses of all the leaf routers and route-reflectors must be reachable by the routers in the WAN.

B. The WAN PE maintains a peering session with the data center route reflector.

C. There is a clear demarcation for security and QoS between the data center border leaf and the WAN PE.

D. VXLAN tunnels are established between the leaf routers in the different data centers.

A. The redundancy mode for this Ethernet segment is all-active.

B. This Ethernet segment is configured for Layer 3 multi-homing.

C. A LAG must be configured on the connected leaf routers and the host.

D. The EVI for the IP-VRF using this segment is 1000.

A. All traffic to and from the host will flow through Leaf1.

B. The ports that connect to the host are associated to ES-1.

C. The host will be required to be configured with a LAG.

D. The Ethernet segment ES-1 is configured as single active.