Implementing Cisco Unified Wireless Mobility Services (IUWMS v2.0)

Question 1

Which statement describes the purpose of the Cisco WLC v7.0 AP global configuration parameter AP Primary Discover Timeout?

A. Adjust the AP discovery timer of backup controllers.

B. Adjust the AP timeout for missed heartbeats for the primary controller.

C. Adjust the AP boot time discovery of controllers.

D. Adjust the AP heartbeat timer to detect the primary controller.

Correct Answer: A

Question 2

Controllers WLC_1 and WLC_2 are in different mobility domains. A wireless client that has the same VLAN interface roams from WLC_1 to WLC_2. What happens to the client roaming?

A. The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller.

B. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller.

C. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller.

D. The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller.

Correct Answer: A

Question 3

An engineer is installing a new WCS. What two file transfer protocols should be prepared to create root folders during installation? (Choose two.)

A. TFTP

B. FTPS

C. SCP

D. FTP

E. SFTP

Correct Answer: A,D

Question 4

Cisco WLC v7.0 is configured on 2.4 GHz for mandatory data rates of 9 and 18 Mb/s. Data rates of 6, 12, 24, 36, 48, and 54 Mb/s are configured as supported. All other data rates are disabled. Which three results can be determined from this configuration? (Choose three.)

A. Broadcast and multicast packets are sent at 18 Mb/s.

B. Clients must be able to receive packets at 9 Mb/s.

C. Broadcast packets are sent at 9 Mb/s, while multicast packets are sent at 18 Mb/s.

D. 802.11a/n clients are able to connect.

E. 802.11b/g/n clients are able to connect.

F. Clients must be able to receive packets at 18 Mb/s.

G. Broadcast packets are sent at 18 Mb/s, while multicast packets are sent at 9 Mb/s.

Correct Answer: B,C,E

Question 5

What is the recommended procedure for changing the BGN in a mesh network that is running version 7.0 while maintaining connectivity to relevant APs?

A. Configure groups of APs that have formed parent/child/neighbor relationships as groups within the mesh, and then configure the RAP.

B. Start with the most distant AP and work toward the RAP, configuring the RAP last.

C. Configure the RAP first, and then work from the most distant AP toward the RAP.

D. Configure secondary BGN throughout the mesh network, and then delete the original BGN.

Correct Answer: B

Question 6

What is the recommended limit of indoor MAPs to one RAP?

A. 2

B. 12

C. 10

D. 4

E. 8

Correct Answer: D

Question 7

What is the default username and password for communication between Cisco WCS and the Cisco 3300 Series MSE v7.0?

A. Cisco and Cisco

B. root and password

C. root and admin

D. admin and admin

E. cisco and cisco

Correct Answer: D

Question 8

Which three statements correctly describe implementing RFID tags based on RSSI and TDoA location in a Cisco Unified Wireless Network based on v7.0? (Choose three.)

A. The Cisco tag engine can be enabled for RSSI and TDoA tag location.

B. The Cisco and AeroScout tag engines are preinstalled.

C. The AeroScout tag engine can be enabled for RSSI and TDoA tag location.

D. The AeroScout tag engine can only be enabled for TDoA tag location.

E. No tag engines are loaded; they must be installed.

F. The Cisco tag engine is preinstalled, but the AeroScout tag engine requires installation.

G. The Cisco tag engine can only be enabled for RSSI tag location.

Correct Answer: B,C,G

Question 9

A Cisco WLC v7.0 is not seeing an AP join. Which starting prefix debug command can help determine a combination of discovery/join and DHCP process status?

A. debug capwap events - from the AP

B. debug ip udp - from Cisco WLC

C. debug ip udp - from the AP

D. debug capwap events - from Cisco WLC

Correct Answer: C

Question 10

Context-aware usage has been deployed on a Cisco MSE 3310 that is licensed to maximum capacity. Approximately 900 wireless clients are currently being tracked. New services need to be added for 500 RFID tags based on RSSI and 500 RF interferers tracked via CleanAir. What should be changed regarding the Cisco 3300 Series MSE v7.0?

A. Add only a CleanAir license to Cisco MSE 3310.

B. No license is required.

C. Add a second Cisco MSE 3310 with a license for RFID tags, and then add a license for CleanAir to either the original or new Cisco MSE.

D. Replace Cisco MSE 3310 with MSE 3355 with a license for CleanAir and tags, and then move the license from Cisco MSE 3310 to MSE 3355 for context-aware.

E. Add only an RFID tag license to Cisco MSE 3310.

F. Increase only the context-aware license.

G. Add a CleanAir and RFID tag license to Cisco MSE 3310.

Correct Answer: B

Question 11

A wireless client is connected at 54 Mb/s to a MAP. That MAP has two hops to reach the RAP. The mesh backbone is operating at a 48-Mb/s link data rate. What is the throughput that the client can expect?

A. 48 Mb/s

B. 24 Mb/s

C. 12 Mb/s

D. 6 Mb/s

E. 36 Mb/s

Correct Answer: C

Question 12

A network engineer needs to bridge a wired IP surveillance camera in the parking lot through a Mesh AP. What mode would the AP the camera is connected to be operating in?

A. RAP

B. Local

C. FlexConnect

D. MAP

Correct Answer: D

Question 13

Which statement describes normal Cisco 3300 Series MSE v7.0 maintenance?

A. Using the Cisco MSE CLI, stop Cisco MSE, run the defragment database, and start Cisco MSE.

B. Using the Cisco MSE CLI, run the defragment database.

C. Using the Cisco WCS interface, run the defragment database.

D. Using the Cisco WCS interface, stop Cisco MSE, run the defragment database, and start Cisco MSE.

Correct Answer: C

Question 14

Which statement best describes the Cisco WCS v7.0 templates for configuration and implementation of the Cisco Unified Wireless Network?

A. Apply only to controllers, lightweight APs, and the Cisco 3300 Series MSE.

B. Apply only to controllers.

C. Apply only to controllers, lightweight APs, and autonomous APs.

D. Apply only to controllers and lightweight APs.

E. Apply to controllers, lightweight APs, autonomous APs, and Cisco MS

Correct Answer: C

Cisco Implementing Cisco Unified Wireless Mobility Services (IUWMS v2.0) - 642-747 Exam Practice Test

Latest Update

Useful Links

Contact Us