Implementing Cisco Connected Physical Security 1 Exam

Question 1

In the Cisco Video Surveillance solution, which archive clip format allows for the downloading and playing back of multiple camera feeds simultaneously?

A. WMV

B. BWM

C. CVA

D. AVI

Correct Answer: C

Question 2

Refer to the exhibit.

Cisco 648-238 Exam
Cisco VSOM, Cisco VSMS servers, and IP cameras in the shown Cisco VSM deployment are utilizing default NTP behavior to ensure that time settings are synchronized across all devices.
What is the IP address of the pointed-to NTP server for the device with IP address 172.168.1.101?

A. 192.168.1.101

B. 10.0.0.10

C. 172.168.1.101

D. 172.168.1.10

Correct Answer: D

Question 3

Refer to the exhibit.

Cisco 648-238 Exam
Cameras and a Cisco VSM server are connected to a Layer 2 switch.
Which three steps will allow the Cisco VSM servers to see video traffic from the two IP cameras? (Choose three.)

A. The link between GigE 0/5 and FE 1/1 should be configured as a trunk port.

B. GigE 0/10 should be configured to dynamic mode using the #switchport mode dynamic desirable command.

C. Implement "router-on-a-stick".

D. GigE 0/10 should be configured to accept traffic from all VLANs using the #switchport mode access vlan all command.

E. Implement inter-VLAN routing.

Correct Answer: A,C,E

Question 4

On a properly qualified client PC that meets workstation requirements, streaming video appears choppy with ghosting artifacts, but recorded clips that have been extracted and saved to the local PC do not display any quality issues. What is the most common cause of this problem?

A. Video card driver

B. Camera problem

C. H.264 video needs to "settle" in the recording for best quality

D. Network path congestion, QoS, and/or bandwidth issues

Correct Answer: D

Question 5

Which two OS + browser combinations are supported for viewing video using Cisco SASD?
(Choose two.)

A. Windows XP SP3 + Internet Explorer 8 (32- or 64-bit)

B. Windows 7 (64-bit) + Internet Explorer 8 (32-bit)

C. Windows 7 (64-bit) + Internet Explorer 9 (32-bit)

D. Windows 7 (32-bit) + Internet Explorer 8 (32-bit)

E. Windows 7 (32-bit) + Internet Explorer 9 (64-bit)

Correct Answer: B,C

Question 6

Per Cisco best practices, how should you bulk upgrade the firmware of the multiple Cisco IP cameras that are deployed in a Cisco VSM system?

A. via Cisco VSOM - System Settings - System

B. via Cisco VSMC - Maintenance - Manage Drivers

C. via the web interface of each camera only

D. via Cisco VSMC - Maintenance - Server Upgrade

Correct Answer: A

Question 7

What is the correct camera and lens setup for the use of IR lighting?

A. Color camera with varifocal lens

B. A camera with day/night mode and IR corrected lens

C. Color camera with IR corrected lens

D. A camera with day/night mode and varifocal lens

Correct Answer: B

Question 8

In VSM 6.3.2, which tool allows the user to search through archives by reviewing thumbnails?

A. Smart Search

B. Create View

C. Forensic Search

D. Archive Clip

Correct Answer: C

Question 9

Which configuration flow is valid?

A. Locations - Schedules - Templates - Cameras - Media Servers - Users

B. Custom Schedules - Locations - Templates - Media Servers - Cameras

C. Locations - Schedules - Templates - Users - Cameras - Media Servers

D. Locations - Templates - Users - Media Servers - Cameras

Correct Answer: D

Question 10

Which statement about virtualization support for Cisco VSM version 7.0.0 is true?

A. When using internal storage of Cisco UCS C-Series server for storing media repositories, external storage (such as SAN arrays) cannot be used.

B. Cisco VSM 7 OVA can be deployed and ready to use right away, without additional configuration steps.

C. Cisco VSM 7 can be installed on any hypervisor, such as VMware vSphere, Microsoft Hyper-V, and Citrix XenServer

D. Each Cisco UCS B- or C-Series server can run several instances of Cisco VSM VM at the same time, as long as the resources of the server are sufficient.

Correct Answer: D

Question 11

When adding a new IP camera to VSM 6.3.2, which of the following is not an option when selecting Role Rights?

A. None

B. Manage

C. View

D. Modify

Correct Answer: D

Question 12

Refer to the exhibit.

Which statement can be determined from the output shown?

A. The switch management IP address is 10.10.10.202.

B. The PoE device is connected to switch port 7.

C. The connected device is an 802.af class 2 PoE camera.

D. This is the output from the show power inline command.

Correct Answer: B

Question 13

When adding a backup media server to VSOM, which of the following options is not correct?

A. Either full recording or events from the past 24 hours can be backed up on a daily basis

B. Backups can be scheduled to occur in the future, for example, after one week or one month

C. Camera recordings can be selectively backed up

D. Backup media server can back up archives from multiple media servers

Correct Answer: B

Question 14

Refer to the exhibit.

You just completed an upgrade of Cisco VSM from version 7.0 to 7.0.1 using the management
console. You also want to change the network settings of this server during this upgrade, but the fields are greyed out.
What is causing this issue?

A. The server is running the Cisco VSMS application and you should use the Cisco VSOM interface to change the network configurations.

B. The Cisco VSM services must be restarted before the network settings can be modified.

C. The server is a co-located deployment (Cisco VSOM + Cisco VSMS applications) and the network was configured using the operating system. Changes should also be made using the operating system.

D. The server is running the Cisco VSOM application and you should use the Cisco VSOM interface to change the network configurations.

Correct Answer: A

Question 15

Where should outdoor surveillance cameras be mounted when sources of light are nearby?

A. Cameras should be mounted in parallel with the nearest light source.

B. Location does not matter, as long as the cameras are day/night capable.

C. Cameras should be mounted above the light source.

D. Cameras should be mounted lower than the light source.

Correct Answer: D

Cisco Implementing Cisco Connected Physical Security 1 - 648-238 Exam Practice Test

Latest Update

Useful Links

Contact Us