Virtualization Technical Support for IBM i -v1 - C4040-121 Exam Practice Test

Question 1

When configuring a bridged-virtual-Ethernet-to-physical-Ethernet environment, what value determines which bridge will serve as primary and which as secondary?

A. Priority value

B. Quality of Service value

C. Class of Service value

D. Queuing value

Correct Answer: A

Question 2

What is the correct method to install a firmware update on a single-image system?

A. Install the appropriate firmware PTF package to the IBM i partition and IPL the partition.

B. Load the firmware CD to the optical drive and perform a LODRUN operation.

C. From the DSPEMWSTS screen, use the function to "Update firmware from service machine."

D. Download the firmware and burn it to a CD, then perform a D-side manual IPL.

Correct Answer: A

Question 3

On an HMC under Systems Management and Servers there are three servers listed. One of them shows "no connection." The HMC can ping the configured ESP address. The server has power and the front panel displays HMC=0 in the lower left.
Which action is valid for this connection?

A. Operations-> Change Password

B. Operations-> Launch ASM

C. Properties

D. Operations-> Power On

Correct Answer: B

Question 4

A client plans to add a Power 770 server to a POWEP6 environment. What resource can the administrator use to determine if the HMC is at the correct level to support the new server firmware?

A. Power Code Matrix

B. HMC Service Agent

C. System Planning Tool

D. ASMI

Correct Answer: A

Question 5

An operator shut down an operating IBM i partition from the HMC. What is the result of this action?

A. Objects in disk IOA write cache will be lost.

B. The next IPL will need to be manual and will require a Reclaim Storage to complete.

C. The next IPL of the partition will be an abnormal IPL.

D. RAID integrity may be compromised.

Correct Answer: C

Question 6

How are consoles accessed remotely for AIX and Linux partitions running on an HMC-managed Power Systems server?

A. Open a ssh connection to the HMC, use the "vtmenu" command.

B. Use LAN Console, specifying the appropriate serial and partition number.

C. Telnet to the HMC on port 2301.

D. In ASMI, select "open shared console" for the desired partition.

Correct Answer: A

Question 7

A client IBM i partition running 6.1 is being upgraded to 7.1 using an image catalog on an IBM i 6.1 partition. The image catalog is loaded into a virtual optical device and made available to the client partition using a Network Server Description and virtual SCSI adapters.
Which statement is correct?

A. The virtual optical device performs as a library in IBM i 6.1.

B. The virtual optical device should be specified in the NWSD before it can be seen by the client partition.

C. The device will show on the client with the same name as on the host.

D. The next volumes will have to be mounted manually, one by one.

Correct Answer: D

Question 8

What is the minimum required configuration in a client LPAR to virtualize disk storage from a host IBM i LPAR to the client IBM i LPAR?

A. One vSCSI client adapter and one NWSSTG

B. One NWSD and one vSCSI client adapter

C. One vSCSI client adapter

D. One network storage description

Correct Answer: C

Question 9

In the following output from an IBM i partition from a POWER7 server, Simultaneous Multi-Threading (SMT) functionality in turned on:

How many processors are reported to the partition?

A. 2

B. 16

C. 4

D. 8

Correct Answer: D

Question 10

Disk from a fibre-attached V7000 disk subsystem will be used for an IBM i partition. What type of adapter is required in the IBM i partition?

A. Virtual SCSI adapter

B. Virtual SAS adapter

C. Fibre Channel adapter

D. SAS disk adapter

Correct Answer: A

IBM Virtualization Technical Support for IBM i -v1 - C4040-121 Exam Practice Test

Latest Update

Useful Links

Contact Us