Medical Professional Certified Healthcare Facility Manager (CHFM) certification - CHFM Exam Practice Test
Question 1
A hospital is required to have what class of essential electrical system installed?
Correct Answer: B
Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).
Question 2
To minimize the number of change orders, it is best to have
Correct Answer: B
Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).
Question 3
Fire doors used within a means of egress shall be
Correct Answer: D
Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).
Question 4
A liquid oxygen tank has the chart shown below attached to the side of the tank:
At 107 in. = 234,480 cu. ft. (from chart)
Hospital usage = 15,000 cu. ft./day
How many days of oxygen are left in the tank?
At 107 in. = 234,480 cu. ft. (from chart)
Hospital usage = 15,000 cu. ft./day
How many days of oxygen are left in the tank?
Correct Answer:
(15 days)
Explanation:
Calculation:
234,480 ÷ 15,000 = 15.63 days # # 15 days supply available.
References: NFPA 99, Oxygen Storage and Piping Systems; CHFM Candidate Handbook - Maintenance and Operations domain.
Explanation:
Calculation:
234,480 ÷ 15,000 = 15.63 days # # 15 days supply available.
References: NFPA 99, Oxygen Storage and Piping Systems; CHFM Candidate Handbook - Maintenance and Operations domain.
Question 5
After a recent lighting retrofit, the measured load on the affected lighting panel is 110 amps at 277 volts. The load is constant for 100 hours each week. Assuming the power factor to be 1, what is the annual energy consumption in kWh?
Correct Answer: B
Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).
Question 6
A facility manager has to prepare a labor budget for an upcoming addition of a new patient wing. Budgetary needs will include:
- Two carpenters at $40 per hour for 20 hours a week for project work for 78 weeks
- Two carpenters at $40 per hour for 20 hours a week for maintenance work for 78 weeks
- One laborer at $20 per hour for 40 hours a week for project work for 78 weeks
- One supervisor at $45 per hour for 10 hours a week for project work for 104 weeks
- One supervisor at $45 per hour for 10 hours a week for maintenance work for 104 weeks What is the correct budget assignment, without any benefits?
- Two carpenters at $40 per hour for 20 hours a week for project work for 78 weeks
- Two carpenters at $40 per hour for 20 hours a week for maintenance work for 78 weeks
- One laborer at $20 per hour for 40 hours a week for project work for 78 weeks
- One supervisor at $45 per hour for 10 hours a week for project work for 104 weeks
- One supervisor at $45 per hour for 10 hours a week for maintenance work for 104 weeks What is the correct budget assignment, without any benefits?
Correct Answer: B
Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).
Question 7
According to NFPA 70, what is the minimum working clearance required for enclosed electrical equipment with 600 volts or less?
Correct Answer: B
Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).
Question 8
In the design of a new bone marrow unit within an existing hospital, there are 10 protective environment rooms. The area of each room is 140 sq. ft. with an 8-ft. ceiling height. All rooms are served by a single AHU.
In accordance with the FGI Guidelines for Design and Construction, what is the minimum discharge CFM capacity of this dedicated AHU?
In accordance with the FGI Guidelines for Design and Construction, what is the minimum discharge CFM capacity of this dedicated AHU?
Correct Answer: B
Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).
Question 9
According to NFPA 80, the maximum undercut allowed for rated fire doors is how many inches?
Correct Answer: C
Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).
Question 10
The time that materials or assemblies have withstood a fire exposure, as established in accordance with test procedures of NFPA 251, is referred to as the
Correct Answer: D
Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).
