AVIXA Certified Technology Specialist - Installation - CTS-I Exam Practice Test

A. Cable

B. Amplitude

C. Bandwidth

D. Frequency

A. Broken

B. disappeared

C. stopped existing

D. been converted to heat

A. crimping

B. insulation displacement

C. linear compression

D. soldering

A. Thinnest

B. Weakest

C. Strongest

D. Shortest

A. Hold your position as the AV expert until they respect your expertise

B. Keep pressing your suggestions until the customer understands

C. Listen to what the customer is saying without interrupting them

D. Let them verbally assault you until you understand what they want

A. The swing-out door could jam in the carpet.

B. The door may require installation before mounting the equipment.

C. The door gets in the way of mounting the equipment.

D. The door could pinch the cables.

A. It may be subject to interference from ambient light.

B. It always requires batteries.

C. It requires direct line of sight to the device's control point.

D. It does not provide feedback that commands have been executed.

A. Solid concrete

B. Poured pan concrete

C. I-beams

D. Post-tension construction

A. Weld parts of the pipe together.

B. Lock threaded junction points.

C. Solder parts of the pipe together.

D. Tape parts of the pipe together.

A. Before you've found all of the studs behind the mounting wall

B. Once you've placed it upon a flat, clean, shipping blanket

C. After you've made final adjustments to the display based on the viewing environment

D. After it's been mounted to the wall

A. the whole number multiples of individual sine waves

B. varying proportional energy levels of a fundamental frequency

C. the whole number multiples of a fundamental frequency

D. the particular make-up of complex waveforms

A. Five

B. Four

C. Three

D. Two

A. Identify changes to the original design that will affect the AV installation

B. Develop a relationship with the other people on the job

C. Submit invoices and other budget documentation

D. Find out the project's completion date

A. AV project manager

B. Structural engineer

C. Design consultant

D. Mechanical contractor