RecoverPoint Specialist Exam for Implementation Engineers

Question 1

During deployment of a vRPA OVF template a temporary IP address must be set to be used by Deployment Manager in later steps.
Which IP address allocation policy should be selected?

A. Fixed

B. Transient

C. DHCP

D. No manual selection needed. The OVF template deployment automatically selects the correct IP allocation policy.

Correct Answer: A

Question 2

What is a characteristic of a full sweep?

A. A full sweep occurs when a user enables a disabled splitter.

B. Initialization is done on all volumes in a Consistency Group.

C. Initialization is done on specific volumes in a Consistency Group.

D. A full sweep occurs when a user enables a disabled volume.

Correct Answer: B

Question 3

A company is currently using RecoverPoint/CL with CLARiiON CXs in their environment. All of the data has been migrated to new VNXs and the CX splitters need to be removed from RecoverPoint.
How is this accomplished?

A. The CXs will not be detected by Unisphere and the splitter entries will be removed automatically

B. Use RecoverPoint Deployment Manager to remove the CX splitters

C. In Unisphere for RecoverPoint, navigate to RPA Clusters > RPA-Cluster-Name tab > Splitters and remove the CX splitters

D. In Unisphere for RecoverPoint, navigate to RPA Clusters > Splitters and remove the CX splitters

Correct Answer: C

Question 4

Your business is planning to deploy RecoverPoint for your DR solution. What is an important consideration when using Consistency Groups in RecoverPoint 4.1?

A. Fibre connectivity is required for synchronous replication

B. Supports up to three remote copies in a same remote cluster

C. Supports host-based and array-based write splitters

D. Supports up to two synchronous copies per Consistency Group

Correct Answer: D

Question 5

You are adding a VMAX array to a RecoverPoint/CL environment.
What needs to be done?

A. Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add the RPA initiator and port groups to the masking view.

B. Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs.

C. Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to the production host initiator.

D. After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to tag all volumes that RecoverPoint is masked to - including the production and copy volumes.

Correct Answer: C

Question 6

Which ports from a VPLEX Metro system must be zoned to the RPAs in order to install the VPLEX write splitter?

A. BE ports only

B. FA ports

C. FE ports only

D. FE and BE ports

Correct Answer: D

Question 7

What is a benefit of integrating RecoverPoint with VMware Site Recovery Manager (SRM)?

A. Enables coordinated failover of virtual machines and their storage

B. Enables full protection of VMware ESXi servers

C. Enables replication of individual virtual machines without the need to replicate an entire VMFS volume

D. Eliminates hardware dependencies when using heterogeneous storage with VMware

Correct Answer: A

Question 8

A VPLEX write splitter can be shared with how many RecoverPoint clusters?

A. 5

B. 10

C. 8

D. 6

Correct Answer: D

Question 9

What Installation Manager menu selections would you make to view the VNX iSCSI ports?

A. 3 - Diagnostics > 2 - SAN diagnostics > 2 - View RPA ports

B. 3 - Diagnostics > 2 - SAN diagnostics > 3 - View target LUNs

C. 3 - Diagnostics > 1 - IP diagnostics > 6 - System connectivity

D. 3 - Diagnostics > 1 - IP diagnostics > 2 - View IP details

Correct Answer: A

Question 10

What is used when more performance is needed than a single RPA can provide for asynchronous replication?

A. Journal compression

B. Fibre Channel connections

C. Distributed Consistency Groups

D. Multi-cluster copies

Correct Answer: C

Question 11

A customer has two VMAX arrays and three VNX arrays fronted by an EMC VPLEX. They wish to use RecoverPoint to protect their environment.
How many licenses, and of which type, would be required for their environment?

A. 6 EX licenses

B. 1 EX license

C. 5 EX licenses

D. 1 SE license and 2 EX licenses

Correct Answer: B

Question 12

Which Unisphere for RecoverPoint view displays both the system traffic and Consistency Group status?

A. Recovery

B. RecoverPoint Dashboard

C. Admin

D. RPA Clusters

Correct Answer: B

Question 13

In order to create a new Consistency Group, a user should navigate to which option within the Protection tab of Unisphere for RecoverPoint?

A. Manage Protection

B. Deployment Manager

C. Group Sets

D. Protect Volumes

Correct Answer: D

Question 14

When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?

A. usernamE.admin passworD.admin

B. usernamE.service passworservice

C. usernamE.boxmgmt passworD.boxmgmt

D. usernamE.admin passworD.Mi@Dim7T

Correct Answer: C

Question 15

Which type of Consistency Group requires a primary and secondary production copy?

A. Synchronous

B. MetroPoint

C. Distributed

D. Asynchronous

Correct Answer: B

EMC RecoverPoint Specialist Exam for Implementation Engineers - E20-375 Exam Practice Test

Latest Update

Useful Links

Contact Us