Study with HP0-Y44 Actual Test Questions

A customer is considering an HP MSM720 Access Controller to manage and provide other services for wireless solution. The deployment includes 40 HP MSM APs. The customer would like the option to support additional APs in the future. Which product offering should the customer consider instead?

• A. Two MSM710s with premium mobility licenses, which provide redundancy and the ability to scale beyond 40 APs.
• B. A controller such as the MSM710, which can support additional APs with additional licenses.
• C. An MSM760 controller, which provides the ability to scale to more than 40 APs.
• D. Two MSM720 controllers with premium mobility licenses, which provide redundancy as well as the ability to scale beyond 40 APs.

The use Controller for Access Control is selected option is selected for VSC that is defined on an MSM Controller.
The VSC also has these security strings:
-802.1X authentication, using an external RADIUS server
-WPA2 encryption
-Wireless MAC filter with block list.
-Wireless IP filter
Which security setting is processed first?

• A. 802.1X
• B. WPA
• C. Wireless IP filter
• D. Wireless MAC filter

Refer to the exhibit.
Security settings and authorized device list.

A VSC defined on an HP MSM controller enforces WPA2 encryption with preshared keys (PSK). For additional security, APs should allow only the company's authorizes defined device connect. The exhibit shows the list that the network administrator has defined with MAC addresses. Users are having connecting to the WLAN.
What might be the cause of this problem?

• A. This form of MAC filtering is not compatible with any other form of authorization except 802.1X authentication.
• B. The VSC does not support WPA2 and AES-CCMP, but the clients require this encryption for 802.1n.
• C. The list has been applied as a block list instead of as an allow list.
• D. The MAC addresses have been entered in the wrong format.

A network administrator has installed an HP MSM765 zl controller in slot D of an HP 8212 zl switch. The network administrator plans to configure management IP address on the controller's (untagged) internet port network and have APs communicate with the controller on that address. This IP address is the only one necessary for the solution.
Because the controller does not used to receive traffic on its LAN port, how should the administrator configure the interface on the switch side?

• A. Disable interface d2
• B. Change interface d2s untagged VLAN ID to the same VLAN assigned interface d1
• C. Change interface d2 untagged VLAN ID to an unused VLAN
• D. Disable interface d1

Which statement accurately describes 802 11i Mixed Mode?

• A. The AP sends all stations a TKIP group key.
• B. The AP sends all stations both a TKIP and an AES group key.
• C. The AP sends all stations an AES group key
• D. The AP sends stations using TKIP a TKIP group key and stations using AES an AES group key