HP Aruba Certified Mobility Expert Written - HPE6-A48 Exam Practice Test
Question 1
Refer to the exhibit.
A network administrator completes the initial configuration dialog of the Mobility Controllers (MCs) and they join the Mobility Master (MM) for the first time. After the MM-MC association process, the network administrator only creates AP groups, VAPs, and roles. Next, the network administrator proceeds with the configuration of the policies and creates the policy shown in the exhibit.
Which additional steps must be done to make sure this configuration takes effecr over the contractor users?
A network administrator completes the initial configuration dialog of the Mobility Controllers (MCs) and they join the Mobility Master (MM) for the first time. After the MM-MC association process, the network administrator only creates AP groups, VAPs, and roles. Next, the network administrator proceeds with the configuration of the policies and creates the policy shown in the exhibit.
Which additional steps must be done to make sure this configuration takes effecr over the contractor users?
Correct Answer: D
Question 2
Refer to the exhibit.
A network administrator deploys a new Mobility Master (MM)-Mobility Controller (MC) network. To test the solution, the network administrator accessess some of the AP consoles and statistically provisions them. However, these APs do not propagate the configured SSIDs. The network administrator looks at the logs and sees the output shown in the exhibit.
Which actions must the network administrator take to solve the problem?
A network administrator deploys a new Mobility Master (MM)-Mobility Controller (MC) network. To test the solution, the network administrator accessess some of the AP consoles and statistically provisions them. However, these APs do not propagate the configured SSIDs. The network administrator looks at the logs and sees the output shown in the exhibit.
Which actions must the network administrator take to solve the problem?
Correct Answer: B
Question 3
Refer to exhibit.
A company has a multiple Arua implementation with three different locations named Headquarter, Branch, and Telecommuters.
The network design includes the following:
Headquarter APs terminate at the Mobility Controller (MC) cluster and propagate Corporate, Guest, and Voice SSIDs
Branch APs terminate at the Branch Office Controller (BOC) and propagate Corporate and Voice SSIDs
BOC reaches the Mobility Master (MM) through a VPNC.
Telecommuter RAPs terminate at VPNC and propagate Corporate and Voice SSIDs.
The Corporate SSID on the RAPs is split-tunnel, all other SSIDs are tunnel.
The network design requires minimal AP group and VAP configuration effor, while preventing unnecessary VAP propagation to lower hierarchy levels.
Following Aruba node hierarchy desing recommendations, which group hierarchy design helps meet these requirements?
A company has a multiple Arua implementation with three different locations named Headquarter, Branch, and Telecommuters.
The network design includes the following:
Headquarter APs terminate at the Mobility Controller (MC) cluster and propagate Corporate, Guest, and Voice SSIDs
Branch APs terminate at the Branch Office Controller (BOC) and propagate Corporate and Voice SSIDs
BOC reaches the Mobility Master (MM) through a VPNC.
Telecommuter RAPs terminate at VPNC and propagate Corporate and Voice SSIDs.
The Corporate SSID on the RAPs is split-tunnel, all other SSIDs are tunnel.
The network design requires minimal AP group and VAP configuration effor, while preventing unnecessary VAP propagation to lower hierarchy levels.
Following Aruba node hierarchy desing recommendations, which group hierarchy design helps meet these requirements?
Correct Answer: A
Question 4
Company 1 and Company 2 are medium-sized companies that collaborate in a joint venture. Each company owns a building, and each has their own ArubaOS 8 Mobility Master (MM)-Mobility Controller (MC) deployment. The buildings are located in front of one another. For the initial stage of the project, the companies want to interconnect their networks with fiber, and broadcast each other's SSIDs.
These are the requirements:
- Do not unify the company's network management responsibilities.
- Allow each company to take care of their own SSID setups when broadcasted in the other building.
- Terminate Company 1 user traffic on Company 1 MCs when they connect to Company 2 APs.
- Terminate Company 2 user traffic on Company 2 MCs when they connect to Company 1 APs.
What is needed to meet the solution requirements?
These are the requirements:
- Do not unify the company's network management responsibilities.
- Allow each company to take care of their own SSID setups when broadcasted in the other building.
- Terminate Company 1 user traffic on Company 1 MCs when they connect to Company 2 APs.
- Terminate Company 2 user traffic on Company 2 MCs when they connect to Company 1 APs.
What is needed to meet the solution requirements?
Correct Answer: A
Question 5
Refer to the exhibit.
An end user attempts to connect to the company's campus network and cannot find the enterprise SSID even though there is an AP operating engineer attempts to resolve the end user's connectivity problem and issues the show ap active command on the controller shown in the exhibit.
What are the possible reasons why the end user cannot find the enterprise SSID? (Choose two.)
An end user attempts to connect to the company's campus network and cannot find the enterprise SSID even though there is an AP operating engineer attempts to resolve the end user's connectivity problem and issues the show ap active command on the controller shown in the exhibit.
What are the possible reasons why the end user cannot find the enterprise SSID? (Choose two.)
Correct Answer: D,E
Question 6
Refer to the exhibit.
A network administrator wants to allow contractors to access the WLAN named EmployeesNet. In order to restrict network access, the network administrator wants to assign this category of users to the contractor firewall role.
To do this, the network administrator configures ClearPass in a way that it returns the Aruba-User-Role VSA with the contractor value. When testing the solution the network administrator receives the wrong role.
What should the network administrator do to assign the contractor role to contractor users without affecting any other role assignment?
A network administrator wants to allow contractors to access the WLAN named EmployeesNet. In order to restrict network access, the network administrator wants to assign this category of users to the contractor firewall role.
To do this, the network administrator configures ClearPass in a way that it returns the Aruba-User-Role VSA with the contractor value. When testing the solution the network administrator receives the wrong role.
What should the network administrator do to assign the contractor role to contractor users without affecting any other role assignment?
Correct Answer: C
Question 7
A network engineer designs a network with these requirements:
HQ (master controller). Branch office-1 (local controller), and branch office-2 (local controller). Each site has a controller and they are all in the same controller cluster.
Employees at HQ should be mapped to VLAN 10 and 11.
Employees at Branch office-1 should be mapped to VLAN 20.
Employees at Branch office-2 should be mapped to VLAN 30.
All Access points are provisioned with the same configuration (AP-Group).
VAP-Employee is mapped with the VLAN name Employee.
Which configuration should be engineer recommend at Branch office-2?
HQ (master controller). Branch office-1 (local controller), and branch office-2 (local controller). Each site has a controller and they are all in the same controller cluster.
Employees at HQ should be mapped to VLAN 10 and 11.
Employees at Branch office-1 should be mapped to VLAN 20.
Employees at Branch office-2 should be mapped to VLAN 30.
All Access points are provisioned with the same configuration (AP-Group).
VAP-Employee is mapped with the VLAN name Employee.
Which configuration should be engineer recommend at Branch office-2?
Correct Answer: A
Question 8
Refer to the exhibit.
A network engineer deploys two different DHCP pools in an Instant AP (IAP) cluster for WLANs that will have connectivity to a remote site using Aruba IPSec.
Based on the output shown in the exhibit, which IAP-VPN DHCP modes are being used?
A network engineer deploys two different DHCP pools in an Instant AP (IAP) cluster for WLANs that will have connectivity to a remote site using Aruba IPSec.
Based on the output shown in the exhibit, which IAP-VPN DHCP modes are being used?
Correct Answer: B
