Aruba Certified Campus Access Professional Exam

Question 1

A customer is looking Tor a wireless authentication solution for all of their loT devices that meet the following requirements
- The wireless traffic between the IoT devices and the Access Points must be encrypted
- Unique passphrase per device
- Use fingerprint information to perform role-based access
Which solutions will address the customer ' s requirements? (Select two.)

A. MPSK Local with MAC Authentication

B. MPSK and an internal RADIUS server

C. ClearPass Policy Manager

D. MPSK Local with EAP-TLS

E. Local User Derivation Rules

Correct Answer: C,D

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 2

A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575S. Cables running to theAPs are not labeled.
The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests) What is the correct configuration to ensure that APs will work properly?

A.

B.

C.

D.

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 3

You are deploying Aruba CX 6300 ' s with the customers requirement to only allow one (1) VoIP phone and one (1) device.
The following local role gets assigned to the phone
port-access rote VoIP device-traffic-class voice
What set of commands best fits this requirement?

A. interface 1/1/1
aaa authentication port-access client-limit 1
aaa authentication port-access auth-mode device-mode

B. interface 1/1/1
aaa authentication port-access auth-mode multi-domain

C. interface 1/1/1
aaa authentication port-access client-limit multi-domain 2 aaa authentication port-access auth-mode multi-domain

D. interface 1/1/1
aaa authentication port-access client-limit 2
aaa authentication port-access auth-mode client-mode

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 4

When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

A. hello interval is 1s by default

B. hello interval 100ms by default

C. hello interval is disabled by default

D. hello interval is based on the value set by dead interval

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 5

For the Aruba CX 6400 switch, what does virtual output queueing (VOQ) implement that is different from most typical campus switches?

A. per port ASICs

B. VSX

C. large ingress packet buffers

D. large egress packet buffers

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 6

Refer to the output from a CX 6100 switch:

What is the correct detail that can be observed from the output above?

A. The dBm values for Rx are too low, indicating that the link is down.

B. The dBm values for Rx are within acceptable values, and the link is up.

C. The dBm values for Tx are too high and affect Rx signals.

D. The dbm values for T are too far away from 0, and the link is down.

Correct Answer: A

Question 7

By default, Best Effort is higher priority than which priority traffic type?

A. Background

B. Network Control

C. All queues

D. Internet Control

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 8

You need to create a keepalive network between two Aruba CX 8325 switches for VSX configuration How should you establish the keepalive connection?

A. SVI, VLAN trunk allowed all on ISL in default VRF

B. routed port in custom VRF

C. SVI, VLAN trunk allowed all on ISL in custom VRF

D. loopback 0 and OSPF area 0 in default VRF

Correct Answer: B

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 9

A customer is concerned about me unprotected traffic between an AOS-CX switch and a gateway, running on AOStO. What is a feasible option to protect this traffic?

A. Implement a GRE tunnel to protect PAPI between the AOS-CX switches and the gateway

B. Implement an MD5 HMAC function lo protect PAPI between the AOS-CX switches and the gateway

C. Implement an IPSec tunnel to protect PAPI between the AOS-CX switches and the gateway

D. no action is needed, an RSA certificate already encrypts the traffic

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 10

With the Aruba CX 6000 24G switch with uplinks of 1/1/25 and what does the switch do when a client port detects a loop and the do-not-disabie parameter is used?

A. The network analytics engine is triggered.

B. Port status led blinks in amber with 100hz.

C. An event log message is created.

D. Port status will be validated once status is cleared

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 11

What does the 802.3bz standard describe?

A. 60 GHz P2P Wi-Fi

B. 2.5Gb and 5Gb Ethernet ports

C. AP directed roaming between APs

D. 60 W and 90W PoE

Correct Answer: B

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 12

With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?

A. Sixteen different VMACS are supported for each IPV4 and IPV6 stack simultaneously

B. Active Gateway can once MSTP instances are created for VLAN load sharing.

C. copied over the ISL link for an optimized path.

D. Sixteen different VMACs are supported total as shared.

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

HP Aruba Certified Campus Access Professional - HPE7-A01 Exam Practice Test

Latest Update

Useful Links

Contact Us