Study with MO-210 Actual Test Questions

Instructions
Exam Environment
Exam Interface and Controls
The exam panel provides access to the project task(s). Each project has an associated file in which you will perform the project tasks.


Overview:
Car Warranty
You are the supervisor for a Car Warranty Center. You use Excel to report employee hours and telephone calls.
Task5:
On the Average Call Time worksheet, create a 3-D Clustered Column chart that shows the call times for each Salesperson from Mon through Fri. Insertthe Chart Title Average Call Time. Position the new chart below the table.

See the solution in Explanation below.
Explanation:
To completeTask 5, you will create a 3-D Clustered Column chart on theAverage Call Timeworksheet to visualize the weekly performance of each salesperson.
Step 1: Navigate to the Worksheet
Click on theAverage Call Timetab at the bottom of your Excel window to switch views.
Step 2: Select the Data Range
You need to select the names and the call times for all five days (Monday through Friday), butexcludethe
"Trend" column:
* Click and drag to select cellsA3 to F14.
* Note:This includes the header row (Salesperson, Mon, Tue, etc.) and all employee rows down to Michael.
Step 3: Insert the 3-D Clustered Column Chart
* Go to theInserttab on the Ribbon.
* In theChartsgroup, click theInsert Column or Bar Charticon (it looks like small vertical bars).
* Under the3-D Columnsection, select the first option:3-D Clustered Column.

Step 4: Add the Chart Title
* Click once on the default text that says "Chart Title" at the top of the new chart.
* TypeAverage Call Timeand pressEnter(or click outside the text box).

Step 5: Position the Chart
* Hover your mouse over a blank area of the chart (the chart area).
* Click and drag the chart so it is positionedbelow the table.
* Placement Tip:Usually, starting the chart around row 17 or 18 is ideal so it doesn't overlap your data.

Instructions
Exam Environment
Exam Interface and Controls
The exam panel provides access to the project task(s). Each project has an associated file in which you will perform the project tasks.


Overview:
Car Warranty
You are the supervisor for a Car Warranty Center. You use Excel to report employee hours and telephone calls.
Task4:
In cell 14 of the Employee Hours sheet, use a function to copy the name from cell A4 and format the name so all letters are upper case.

See the solution in Explanation below.
Explanation:
To completeTask 4, you will use theUPPER functionin Excel. This function converts all characters in a specified cell into capital letters.
Step 1: Navigate to Cell I4
Ensure you are on theEmployee Hoursworksheet and click on cellI4(the first cell under theNamecolumn).
Step 2: Enter the UPPER Function
Type the following formula into cellI4:
=UPPER(A4)
* A4: This refers to the cell containing the name "emilio".
* UPPER: This command tells Excel to change those letters to "EMILIO".
Step 3: Fill the Column
Since your data is in a table format, Excel may automatically populate the rest of the column. If it does not:
* Click on cellI4.
* Hover over thebottom-right cornerof the cell until you see thethin black cross (+).
* Double-clickthat cross ordrag it downto cellI14to convert the remaining names to uppercase.

Final Result Check:
* CellA4shows "emilio".
* CellI4should now showEMILIO.

Instructions
Exam Environment
Exam Interface and Controls
The exam panel provides access to the project task(s). Each project has an associated file in which you will perform the project tasks.


Overview:
Car Warranty
You are the supervisor for a Car Warranty Center. You use Excel to report employee hours and telephone calls.
Task 3:
Add a function to the Overtime column cell H4 on the Employee Hours worksheet that will display the word Yes if the value in cell J4 is higher than 40hours. otherwise display the word No. Copy the function from H4:
H16.

See the solution in Explanation below.
Explanation:
To completeTask 3, you will use theIF functionto create a logical test that checks the total hours worked and returns a specific text result.
Step 1: Navigate to the Correct Cell
Ensure you are on theEmployee Hoursworksheet and click on cellH4(the first cell under theOvertime column).
Step 2: Enter the IF Function
Type the following formula into cellH4:
=IF(J4>40, "Yes", "No")
Breakdown of the formula:
* J4>40: This checks if the value in theTotal Hourscolumn is greater than 40.
* "Yes": The value to display if the condition isTrue.
* "No": The value to display if the condition isFalse.

Step 3: Copy the Function (H4:H16)
Since your data is formatted as an Excel Table, the formula might automatically fill down. If it doesn't, follow these steps to copy it to the remaining cells:
* Click on cellH4to select it.
* Hover your mouse over thebottom-right cornerof the cell until the cursor turns into athin black cross (+).
* Click and dragthe handle down to cellH16.
* Release the mouse button to apply the logic to all employees.
Final Check
* Emilio (J4 = 38): Cell H4 should now displayNo.
* Evan (J5 = 50): Cell H5 should now displayYes.

Instructions
Exam Environment
Exam Interface and Controls
The exam panel provides access to the project task(s). Each project has an associated file in which you will perform the project tasks.

Overview:
Guitar Stores
You and a partner own several Guitar Stores. You are analyzing your revenue from the past two quarters.
Task 1:
On the Qtr 2 worksheet, in cell F10, insert a column sparkline showing the sales trend from Apr through Jun.
Apply Gold, Sparkline Style Accent 2,Darker 25% to the sparkline. Copy the sparkline to the remaining cells in the column, F11:F14.

See the solution in Explanation below.
Explanation:
here is the step-by-step solution for Task 1:
Step 1: Navigate to the Correct Worksheet
Click on theQtr 2worksheet tab at the bottom of the Excel window to ensure you are working on the correct data set.
Step 2: Insert the Column Sparkline
* Click on cellF10(this is where the first sparkline will reside).
* Go to theInserttab on the Ribbon.
* In theSparklinesgroup, click onColumn.
* A dialog box will appear. ForData Range, select the cells representingApr through Junfor the first row (likelyB10:D10).
* Ensure theLocation Rangeis set to$F$10.
* ClickOK.
Step 3: Apply the Specific Sparkline Style
With cellF10still selected, a newSparklinetab will appear at the top of your Ribbon.
* Click on theSparklinetab.
* Click theMorearrow (the small downward arrow at the bottom right) of theStylesgallery to see all options.
* Hover over the styles to find the specific name:Gold, Sparkline Style Accent 2, Darker 25%.
* Click to apply it.

Step 4: Copy the Sparkline to Remaining Cells
* Select cellF10.
* Hover your mouse over theFill Handle(the small green square in the bottom-right corner of the cell).
* Click and drag the handle down to cellF14.
* Excel will automatically generate sparklines for the other locations (Downtown, Eastside, etc.) using the same style and corresponding data rows.