The Open Group TOGAF Enterprise Architecture Part 2 Sample Questions:

1. Please read this scenario prior to answering the question
Your role is that of a consultant to the Lead Enterprise Architect to an international supplier of engineering services and automated manufacturing systems. It has three manufacturing plants where it assembles both standard and customized products for industrial production automation. Each of these plants has been operating its own planning and production scheduling systems, as well as applications and control systems that drive the automated production line.
The Enterprise Architecture department has been operating for several years and has mature, well-developed architecture governance and development processes that are based on the TOGAF Standard. The CIO sponsors the Enterprise Architecture.
During a recent management meeting, a senior Vice-President highlighted an interview where a competitor company ' s CIO is reported as saying that their production efficiency had been improved by replacing multiple planning and scheduling systems with a common Enterprise Resource Planning (ERP) system located in a central data center. Some discussion followed, with the CIO responding that the situations are not comparable, and the current architecture is already optimized.
In response, the Architecture Board approved a Request for Architecture Work covering the investigations to determine if such an architecture transformation would lead to improvements in efficiency. You have been assigned to support the architecture team working on this project.
A well-known concern of the plant managers is about the security and reliability of driving their planning and production scheduling from a remote centralized system. Any chosen system would also need to support the current supply chain network consisting of local partners at each of the plants.
Refer to the scenario
You have been asked to explain how you will initiate the architecture project.
Based on the TOGAF Standard, which of the following is the best answer?

A) You would hold a series of interviews at each of the manufacturing plants using thebusiness scenarios technique. This will allow you to understand the systems andintegrations with local partners. You would use stakeholder analysis to identify keyplayers in the engagement, and to understand their concerns. You will then identifyand document the key high-level stakeholder requirements for the architecture. Youwill then generate high level definitions of the baseline and target architectures.
B) You would develop baseline and target Architectures for each of the manufacturingplants, ensuring that the views corresponding to selected viewpoints address keyconcerns of the stakeholders. A business case, together with performance metricsand measures should be defined to ensure the architecture meets the businessneeds. A consolidated gap analysis between the architectures will then validate theapproach and determine the capability increments needed to achieve the target state.
C) You would research vendor literature and conduct a series of briefings with vendorsthat are on the current approved supplier list. Based on the findings from theresearch, you would define a preliminary Architecture Vision including summaryviews, high-level requirements, and high-level definitions of the baseline and targetenvironments from a business, information systems, and technology perspective.
Youwould then use that to build consensus among the key stakeholders.
D) You would conduct a pilot project that will enable vendors to demonstrate potentialoff-the-shelf solutions that address the concerns of the stakeholders. Running a pilotproject will save time and money later in the process. Based on the findings of thatpilot project, a complete set of requirements can then be developed that will drive theevolution of the architecture. Once the requirements are completed, a formalstakeholder review should be held, and permission sought to proceed to develop thetarget architecture.

2. You are working as an Enterprise Architect within an Enterprise Architecture (EA) team at a multinational energy company. The company is committed to becoming a net-zero emissions energy business by 2050. To achieve this, the company is focusing on shifting to renewable energy production and adopting eco-friendly practices.
The EA team, which reports to the Chief Technical Officer (CTO), has been tasked with overseeing the transformation to make the company more effective through acquisitions. The company plans to fully integrate these acquisitions, including merging operations and systems.
To address the integration challenges, the EA team leader wants to know how to manage risks and ensure that the company succeeds with the proposed changes. Based on the TOGAF Standard, which of the following is the best answer?

A) The EA team should document the risks associated with the transformation in an Implementation Factor Catalog to inform decisions during implementation and deployment.
B) The EA team should develop Business Architecture views that demonstrate how stakeholder concerns are addressed and assess each factor for readiness, urgency, and degree of difficulty.
C) The EA team should evaluate the company's readiness for change by identifying factors that will impact the transformation. These factors will be used to determine initial risks associated with the initiative.
D) The EA team should create a Business Scenario to fully describe the business problem that is being addressed by the transformation. Once requirements are identified, they should be evaluated in terms of risks. Any residual risks should be escalated to the Architecture Board.

3. Please read this scenario prior to answering the question
You are employed as an Enterprise Architect at a healthcare company. The company operates over 250 hospitals and is dedicated to transforming healthcare with new ideas and advancements. The company has multiple divisions include surgery centers, freestanding emergency departments, urgent care clinics, and physician practices. They also develop and supply a range of products and services, many with specialized systems and clinical needs.
The company's Enterprise Architecture (EA) department has been operating for several years and has mature, well-developed architecture governance and development processes following the TOGAF standard. The Chief Information Officer (CIO) is the sponsor of the Enterprise Architecture program.
Healthcare is a highly controlled sector, and the company must maintain robust security practices to keep patient information private and prevent data breaches. The company shares electronic health records with multiple providers and has standardized its medical coding for billing and reporting.
Many of the company's rivals have begun using Artificial Intelligence (Al) in their operations, and the indications are that this will be transformative for healthcare delivery. This is something the EA department has been interested in for a while, and they had recently submitted an architecture Change Request which was approved. As a result, the CIO has approved a Request for Architecture Work to implement Al-based solutions in the company.
The project has been established and you have been assigned to work on it. Stakeholders, concerns, and business requirements have been identified. The stakeholders have made it clear that timely implementation of changes can be life-critical, and that changes should be focused on improving patient outcomes. They also have a concern about disruption due to the changes and require the systems to preserve clinical data access and maintain critical life-support systems during any outages.
The scope of what is inside and what is outside the architecture efforts has now been confirmed. Your task is to revisit and review the Architecture Principles, as they form part of the constraints on architecture work.
Refer to the scenario
The EA team leader has asked you to explain which Architecture Principles are most relevant for this project.
Based on the TOGAF standard, which of the following is the best answer?
[Note: You should assume the company follows the example set of Architecture Principles that are provided in the TOGAF standard, ADM Techniques, Architecture Principles chapter.]

A) Common Use Applications promotes standardization across divisions for the solutions, aligning with the company's existing practice of standardized medical coding. Information Management is Everybody ' s Business is relevant because clinical staff, administrative personnel, and IT teams all need to collaborate on information management decisions. Data is Accessible is highly relevant to the healthcare industry. This is needed for users to perform their functions and leads to efficiency and effectiveness.
B) Responsive Change Management emphasizes implementing changes in a timely manner to meet user needs and limiting downtime during change. Primacy of Principles makes it clear that the set of principles applies equally to all divisions and clinical departments. This will ensure that the regulatory requirements across the company are met. Maximize Benefit to the Enterprise will ensure that decisions are made to provide maximum benefit to the company.
C) Compliance with the Law is critical for a company operating in one of the most heavily regulated industries. This principle provides the foundation for ensuring the initiative meets all legal requirements for patient data handling. Interoperability ensuring systems can exchange and use information is important for cross-provider data sharing. Control Technical Diversity will be vital for standardizing the Al implementations across multiple divisions that share electronic health records with standardized medical coding.
D) Common Vocabulary and Data Definitions is essential for standardized medical coding and cross- provider data sharing. This ensures the solutions will properly interpret clinical data consistently across divisions. Data Security is critical to protect patient information aligned with the regulations. It ensures data integrity and system availability for critical care. Requirements-Based Change ensures changes respond to business and clinical needs, supporting changes being driven by clinical requirements.

4. Please read this scenario prior to answering the question
You are employed as an Enterprise Architect working at a vehicle manufacturing company. The company specializes in buses and coaches. You are part of an Enterprise Architecture (EA) team that has responsibilities across multiple divisions of the company. EA provides the company with a comprehensive framework to develop and manage their manufacturing infrastructure, processes for component production, and design and testing systems.
The company has a corporate strategy that focuses on switching to electric power for its vehicles. It has invested heavily in a new standardized design, production efforts, and major components to use across all its product range. The company has multiple manufacturing plants in North America, Europe, and in Asia.
Customer demand has caused a backlog of orders because many customers want to have more environmentally friendly public transportation. There are not enough electronic components available, which is making it hard to produce products and meet customer demand. To address this issue, the company has started making the battery packs themselves and has hired new suppliers.
The EA team is working on a project to improve the process and systems to design, produce, and test the battery pack. As part of putting the new battery pack into production, changes to the assembly processes need to be made. A trial has been completed at a single location. The Chief Engineer, sponsor of the project, and the Architecture Board have approved the plan to roll out these changes to all plants.
Preliminary Architecture Contracts are being developed to detail the work needed to put in place the new processes for each location. The EA team leader has called a meeting to discuss the contracts. It is emphasized that the Architecture Contract will serve as the key connection between architecture and implementation organizations.
The company mixes internal teams with a few third-party contractors at the locations.
The Chief Engineer is worried that the implementation and deployment will not be consistent and of satisfactory quality.
The company has an established EA practice. It uses the TOGAF standard as the foundation for its work including the internal EA framework. Additionally, the company uses various management frameworks such as business planning, project management, and operations management.
Refer to the scenario
The EA team leader asks you how you would address the Chief Engineer ' s concern.
Based on the TOGAF standard, which of the following is the best answer?

A) The contracts must be checked to ensure they have flexibility. For changesundertaken by internal teams, a memorandum of understanding between theArchitecture Board and the implementation organization is needed. If acontract is issued to a contractor, it must be a fully enforceable legal contract. Ifa deviation from the Architecture Contract is found, the Architecture Boardmust grant a dispensation to allow the implementation organization tocustomize the process to meet their local needs.
B) The contracts must be checked to ensure they can be used to direct andcontrol the implementation teams. For contracts issued to third-partycontractors, they must be enforceable legal contracts. For internaldevelopment teams, a memorandum of understanding with the ArchitectureBoard is needed.
The Architecture Board must review all deviations from theArchitecture Contract and decide whether to grant a dispensation to allow theimplementation organization to customize the process to meet their localneeds.
C) The contracts must specify goals, measures, acceptance terms, and risks.Third-party contracts must be legally enforceable. It is advisable to establish aschedule of compliance reviews at key points in the implementation process.The Architecture Board must review all deviations from the ArchitectureContract and consider whether to grant a dispensation to allow the process tobe customized for local needs. Ensure that all dispensations are time-boundrather than indefinite.
D) The contracts must be used to manage the architecture governance processesacross the locations.Monitoring tools must be put in place to assess theperformance of each completed battery pack at each location. If a deviationfrom the contract is needed, the Architecture Board should allow theArchitecture Contract to be modified for the location. In such cases they shouldissue a new Request for Architecture Work to implement a modification to theArchitecture Definition.

5. Please read this scenario prior to answering the question
You are the Lead Enterprise Architect at a major agribusiness company. The company ' s main annual harvest is lentils, a highly valued food grown worldwide. The lentil parasite, broomrape, has been an increasing concern for many years and is now becoming resistant to chemical controls. In addition, changes in climate favor the propagation and growth of the parasite. As a result, the parasite cannot realistically be exterminated, and it has become pandemic, with lentil yields falling globally.
The CEO appreciates the seriousness of the situation and has set out a change in direction that is effectively a new business for the company. There are opportunities for new products, and new markets. The company will use the fields for another harvest and will cease to process third-party lentils. Thus, the target market will change, and the end-products will be different and more varied. This is a major decision and the CEO has stated a desire to repurpose rather than replace so as to manage the risks and limit the costs.
The company has a mature Enterprise Architecture practice based in its headquarters and uses the TOGAF standard as the method and guiding framework. The practice has an established Architecture Capability, and uses iteration for architecture development. The CIO is the sponsor of the activity.
The CIO has assigned the Enterprise Architecture team to this activity. At this stage there is no shared vision, or requirements.
Refer to the scenario
You have been asked to propose the best approach for architecture development to realize the CEO ' s change in direction for the company.
Based on the TOGAF standard which of the following is the best answer?

A) You propose that the priority is to understand and bring structure to the definition of thechange. The team should focus iteration cycles on a baseline first approach toarchitecture development, and then transition planning. This will identify what needs tochange in order to transition from the baseline to the target, and can be used to work outin detail what the shared vision is for the change.
B) You propose that this engagement define the baseline Technology Architecture first inorder to assess the current infrastructure capacity and capability for the company. Thenthe focus should be on transition planning and incremental architecture deployment.This will identify requirements to ensure that the projects are sequenced in an optimalfashion so as to realize the change.
C) You propose that the team focus its iteration cycles on architecture development bygoing through the architecture definition phases (B-D) with a baseline first approach.This will support the change in direction as stated by the CEO. It will ensure that thechange can be defined in a structured manner and address the requirements needed torealize the change.
D) You propose that the team focus on architecture definition, with emphasis on definingthe change parameters to support this new business strategy that the CEO hasidentified. Once understood, the team will be in the best position to identify therequirements, drivers, issues, and constraints for the change.
You would ensure that thearchitecture development addresses non-functional requirements to assure that thetarget architecture is robust and secure.

Solutions: