Citrix Architecting a Citrix Networking Solution - 1Y0-440 Exam Practice Test
Question 1
Scenario: A Citrix Architect holds a design discussion with a team of Workspacelab members, and they capture the following requirements for the NetScaler design project.
A pair of NetScaler MPX appliances will be deployed in the DMZ network and another pair in the internal network.
High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.
Multi-factor authentication must be configured for the NetScaler Gateway virtual server.
The NetScaler Gateway virtual server is integrated with the StoreFront server.
Load balancing must be deployed for users from the workspacelab.com domain.
The workspacelab users should be authenticated using Cert Policy and LDAP.
All the client certificates must be SHA 256-signed, 2048 bits, and have UserPrincipalName as the subject.
Single Sign-on must be performed between StoreFront and NetScaler Gateway.
After deployment, the architect observes that LDAP authentication is failing.
Click the Exhibit button to review the output of aaad debug and the configuration of the authentication policy.
Exhibit 1
Exhibit 2
What is causing this issue?
A pair of NetScaler MPX appliances will be deployed in the DMZ network and another pair in the internal network.
High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.
Multi-factor authentication must be configured for the NetScaler Gateway virtual server.
The NetScaler Gateway virtual server is integrated with the StoreFront server.
Load balancing must be deployed for users from the workspacelab.com domain.
The workspacelab users should be authenticated using Cert Policy and LDAP.
All the client certificates must be SHA 256-signed, 2048 bits, and have UserPrincipalName as the subject.
Single Sign-on must be performed between StoreFront and NetScaler Gateway.
After deployment, the architect observes that LDAP authentication is failing.
Click the Exhibit button to review the output of aaad debug and the configuration of the authentication policy.
Exhibit 1
Exhibit 2
What is causing this issue?
Correct Answer: C
Question 2
Which two settings should a Citrix Architect use on Citrix Application Delivery Management for configuring CPX using a pre-existing CPX device? (Choose two.)
Correct Answer: C,E
Question 3
A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a Citrix ADC _________deployed_________. (Choose the correct option to complete sentence.)
Correct Answer: D
Question 4
Which session parameter does the default authorization setting control when authentication, authorization, and auditing profiles are configured?
Correct Answer: B
Question 5
Which four settings can a Citrix Architect use to create a configuration job using Citrix Application Delivery Management? (Choose four.)
Correct Answer: C,D,E,F
Question 6
Scenario: A Citrix Architect is asked by management at the Workslab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing NetScaler configuration. Currently, the NetScaler MPX devices are configured in a high availability pair, and the outbound traffic is load-balanced between two Internet service providers 9ISPs). However, the failover is NOT happening correctly.
The following requirements were discussed during the design requirements phase:
The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
The link should fail over if the ISP router is up and intermediary devices to an ISP router are down.
Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously.
What should the architect configure with Link Load balancing (LLB) to meet this requirement?
The following requirements were discussed during the design requirements phase:
The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
The link should fail over if the ISP router is up and intermediary devices to an ISP router are down.
Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously.
What should the architect configure with Link Load balancing (LLB) to meet this requirement?
Correct Answer: A
Question 7
_________ content type supports sending NITRO commands to NetScaler. (Choose the correct option to complete sentence.)
Correct Answer: B
Question 8
Which step does a Citrix Architect need to ensure during the Define phase when following the Citrix Methodology?
Correct Answer: B
Question 9
Scenario: A Citrix Architect needs to design a new multi-datacenter Citrix ADC deployment. The customer wants Citrix ADC to provide access the various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment.
Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment based on the stated requirements?
Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment based on the stated requirements?
Correct Answer: B
Question 10
Scenario: A Citrix Architect needs to deploy a NetScaler appliance for Workspacelab, which will provide application load balancing services to Partnerlab and Vendorlab.
The setup requirements are as follows:
A pair of NetScaler MPX appliances will be deployed in the DMZ network.
High availability will be accessible on the NetScaler MPX in the DMZ Network.
Load balancing should be performed for the mail servers for Partnerlab and Vendorlab.
The traffic for both of the organizations must be isolated.
Separate Management accounts must be available for each client.
The load-balancing IP addresses must be identical.
A separate VLAN must be utilized for communication for each client.
Which solution can the architect utilize to meet the requirements?
The setup requirements are as follows:
A pair of NetScaler MPX appliances will be deployed in the DMZ network.
High availability will be accessible on the NetScaler MPX in the DMZ Network.
Load balancing should be performed for the mail servers for Partnerlab and Vendorlab.
The traffic for both of the organizations must be isolated.
Separate Management accounts must be available for each client.
The load-balancing IP addresses must be identical.
A separate VLAN must be utilized for communication for each client.
Which solution can the architect utilize to meet the requirements?
Correct Answer: D
Question 11
Scenario: A Citrix Architect needs to configure a Content Switching virtual server to provide access to www.workspacelab.com. However, the architect observes that whenever the user tries to access www.worksapcelab.com/CITRIX/WEB, the user receives a "503 - Service Unavailable" response. The configuration snippet is as follows:
What should the architect modify to resolve this issue?
What should the architect modify to resolve this issue?
Correct Answer: C
Question 12
Scenario: A Citrix Architect needs to design a new Citrix Gateway deployment for a customer. During the design discussions, the architect documents the key requirements for the Citrix Gateway.
Click the Exhibit button to view the key requirements.
The architect should configure Citrix Gateway for __________________in order to meet the stated requirements. (Choose the correct option to complete the sentence.)
Click the Exhibit button to view the key requirements.
The architect should configure Citrix Gateway for __________________in order to meet the stated requirements. (Choose the correct option to complete the sentence.)
Correct Answer: B
Question 13
Scenario: A Citrix Architect needs to assess an existing NetScaler Gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.
Click the Exhibit button to view the information collected by the architect.
Which configurations should the architect change to meet all the stated requirements?
Click the Exhibit button to view the information collected by the architect.
Which configurations should the architect change to meet all the stated requirements?
Correct Answer: E
Question 14
Which three parameters must a Citrix Architect designate when creating a new session policy? (Choose three.)
Correct Answer: B,C,D
Question 15
Scenario: A Citrix Architect has configured two MPX devices in high availability mode with version 12.0.53.13 nc. After a discussion with the security team, the architect enabled the Application Firewall feature for additional protection.
In the initial deployment phase, the following security features were enabled:
IP address reputation
HTML SQL injection check
Start URL
HTML Cross-site scripting
Form-field consistency
After deployment in pre-production, the team identifies the following additional security features and changes as further requirements:
Application Firewall should retain the response of form field in its memory. When a client submits the form in the request, Application Firewall should check for inconsistencies in the request before sending it to the web server.
All the requests dropped by Application Firewall should get a pre-configured HTML error page with appropriate information.
The Application Firewall profile should be able to handle the data from the RSS feed and an ATOM-based site. Click the Exhibit button to view an excerpt of the existing configuration.
What should the architect do to meet these requirements?
In the initial deployment phase, the following security features were enabled:
IP address reputation
HTML SQL injection check
Start URL
HTML Cross-site scripting
Form-field consistency
After deployment in pre-production, the team identifies the following additional security features and changes as further requirements:
Application Firewall should retain the response of form field in its memory. When a client submits the form in the request, Application Firewall should check for inconsistencies in the request before sending it to the web server.
All the requests dropped by Application Firewall should get a pre-configured HTML error page with appropriate information.
The Application Firewall profile should be able to handle the data from the RSS feed and an ATOM-based site. Click the Exhibit button to view an excerpt of the existing configuration.
What should the architect do to meet these requirements?
Correct Answer: A
