Certified Technology Specialist - CTS Exam Practice Test

Question 1

Determining the expectations of the end users of a presentation space is called a(n):

A. Program report

B. Performance verification

C. Needs analysis

D. Executive summary

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 2

A client with an open concept office space has stated a concern regarding speech privacy for workers. A possible solution for this issue is a(n)

A. individual audio monitor system.

B. sound masking system.

C. audio phase cancellation system.

D. distributed speaker system.

Correct Answer: B

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 3

What would be the BEST way to verify proper performance of a CAT cable fitted with a new termination?

A. connect the source and sync, then verify there is a picture

B. use a cable tester and run a protocol

C. connect the cable to a reference unit to check against it

D. use a multimeter to test if the pins have a connection

Correct Answer: B

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 4

A technician sets up a 1080p LCD screen and connects a 720p source via an 8 m (26 ft) HDMI cable. Later, the source is switched to 1080p output and the image appears on screen, but with sparkling pixels and occasional dropouts. Why has the image quality degraded?

A. Change to aspect ratio needs to register

B. Color depth requirement

C. EDID information is incorrect for new image

D. Signal bandwidth exceeds cable capabilities

Correct Answer: D

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 5

Company information, statement of work, drawings, and bill of materials are presented to the customer as what set of documents?

A. request for quote

B. contract documents

C. bid packet (response)

D. request for proposal

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 6

What is a common vulnerability in a networked AV System?

A. open ports

B. using IPv6

C. static IP address

D. strong passwords

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 7

While troubleshooting a DSP, the AV technician notices that the DHCP server has failed due to the control system not being able to control the volume of the DSP. In order to restore the same IP, the control programmer requires a unique identifier assigned to the network interface card of the DSP. What is the name of that address?

A. network address translation

B. digital multiplex exchange address

C. internet protocol address

D. media access control

Correct Answer: D

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 8

Which of the following is the BEST placement for studio monitor loudspeakers in a 4 m x 6 m room from an acoustic standpoint?

A. Setup B

B. Setup D

C. Setup C

D. Setup A

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 9

During an initial meeting with a prospective client regarding an audiovisual project, it is important to understand the customer's method of procurement in order to avoid.

A. making commitments with regard to delivery times for equipment.

B. expending time and resources designing a project that may ultimately go to bid (tender).

C. missing some of the important components that will be included in the final project.

D. designing the system beyond the budgetary constraints of the client.

Correct Answer: B

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 10

A customer wants to set up a new digital classroom and has approached the integrator for a quote. What is the BEST way to understand the customer's needs before creating the quote?

A. invite the customer to similar installs

B. inform the customer of new technologies

C. have a manufacturer representative visit the customer

D. invite the customer to the office for a meeting

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 11

When calibrating a loudspeaker system, which weight setting on the SPi. meter is used for its mdus>on of low frequency sound levels in the measurement?

A. Weighted

B. Weighted

C. Weighted

D. Weighted

Correct Answer: C

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

Question 12

During a site survey of a facility to be upgraded or modernized, it is important to check wireless microphones that may be redeployed to ensure

A. microphones are operating on acceptable radio frequencies.

B. battery types conform to environmental concerns.

C. polar patterns will not clash with new fabric treatments.

D. antenna design will not interfere with HDBaseT signal distribution system.

Correct Answer: A

Explanation: Only visible for Actualtests4sure members. You can sign-up / login (it's free).

AVIXA Certified Technology Specialist - CTS Exam Practice Test

Latest Update

Useful Links

Contact Us