Study with 300-110 Actual Test Questions

A consulting engineer for a copper mine is trying to extend the network connectivity of autonomous trucks via Cisco IW3702 APs. The WGB design requirements include: latency- sensitive application (truck slows at 10 sec, stops at 20 sec of connection loss), aggressive scanning and roaming, enterprise-grade security without certificates on each AP, multiple clients in different VLANs on the WGB, and channel scan parameters restricted to only channels in the truck path. Which design approach meets the requirements?

• A. WGB in static mode with EAP-TLS connected to a dot1q-capable switch
• B. WGB in mobile station mode with EAP-TLS connected to a dot1q-capable switch
• C. WGB in mobile station mode with EAP Fast connected to a dot1q-capable switch
• D. WGB in static mode with EAP Fast connected to a dot1q-capable switch

A wireless engineer is getting ready to perform a predictive site survey. The new network needs to support data and voice over wireless. Which two Cisco recommendations should be considered for the design? (Choose two.)

• A. Use the 5 GHz radio band due to 40 MHz bandwidth capability.
• B. Set the cell overlap to 15%
• C. Set -19 dBm of separation between APs on the same channel.
• D. Set the cell boundary to -67 dBm.
• E. Use the 5 GHz radio band due to the 24 non-overlapping channels.

An engineer configured the optimized client roaming on Cisco WLC with an RSSI threshold of -72 dBm. Clients report frequent disconnections. What must be configured for the AP to guide the client to a better AP?

• A. Enable BSS transition at the radio level and optimized roaming on the SSID.
• B. Enable BSS transition on the SSID and optimized roaming at the radio level.
• C. Disable coverage hole detection on the SSID and enable BSS transition on the SSID.
• D. Disable optimized roaming and enable 802.11v support on the SSID.

A hospital has a Cisco Catalyst 9800 Series Wireless Controller in an SSO solution deployed in the primary data center. The hospital plans to increase redundancy in the wireless environment.
Management decides to deploy an extra Catalyst 9800 WLC offsite to another data center on a different subnet. A WAN link connects the data centers with a firewall at both ends. Which two design approaches must the engineer take to ensure that the APs can fail over? (Choose two.)

• A. Open HTTPS port 443 between the wireless controllers.
• B. Create a mobility group with the same names on both wireless controllers.
• C. Create a mobility tunnel between the wireless controllers.
• D. Create a static RF group leader on one of the wireless controllers.
• E. Open UDP ports 16666 and 16667 between the wireless controllers.

A customer purchases this Cisco equipment for a new branch office: ?20 Cisco Catalyst 9120 APs ?five Catalyst 9130 APs ?a single Catalyst 9300 Series Switch The customer wants to extend its existing wired and wireless fabric-enabled network to the branch office and manage all devices via a centrally deployed Cisco Catalyst Center (formerly DNA Center). Which Cisco Catalyst Center licenses are required for the branch office equipment?

• A. Cisco Catalyst Essentials on the switch and all the APs
• B. Cisco Catalyst Advantage for the switch and all the APs
• C. Cisco Catalyst Essentials on the APs and Cisco Catalyst Advantage on the switch
• D. Cisco Catalyst Advantage on the APs and Cisco Catalyst Center Premiere on the switch