IBM Virtualization Technical Support for AIX and Linux - v2 - 000-109 Exam Practice Test
Question 1
Which of the following are advantages of configuring a management IP address on a VIO Server?
Correct Answer: A
Question 2
A Power 720 is being used to build 2 environments: Test and Production, with 2 LPARs in each environment. Processor resources must be separated between the Test and Production environments to reduce possible contention, while still being able to share processor resources inside each own environment. What are the two features required, as a minimum, to accomplish this? (Select 2)
Correct Answer: C,D
Question 3
An administrator is planning to configure two new Power Systems servers for Live Partition Mobility (LPM). Each server will be connected to a separate HMC. What is required to achieve this in addition to those requirements needed for LPM with a common HMC?
Correct Answer: C
Question 4
On the following system which uses Multiple Shared Processor Pools (MSPP):
LPAR6 requires two additional processing units. Which of the following will accomplish this?
LPAR6 requires two additional processing units. Which of the following will accomplish this?
Correct Answer: D
Question 5
A production application is hosted across two Power 750 Express servers, managed by an HMC. Each machine has 16 cores and 32GB RAM. Four 8GB LPARs are defined across the two systems and only 3 LPARs are active at once. Live Partition Mobility is used to maintain availability when maintenance is required.
A test environment is being built across two Power 550 Express servers.
Each machine has 8 cores and 16GB RAM. Four 4GB LPARs will be defined across the two systems, again only 3 will be active at once. To isolate the test and production environment, the test environment is managed by two IVMs.
Two LPARs have been created on each test server. The administrator initiates a Live Partition Mobility operation to test moving LPARs between the servers.
The migrlpar command fails to migrate the 4th LPAR with the following error:
"The target managed system does not have enough available memory to create the partition."
Because the 4th LPAR was inactive, it was expected that an inactive migration would be successful.
Why would this inactive migration fail on the test environment, but succeed on the production environment?
A test environment is being built across two Power 550 Express servers.
Each machine has 8 cores and 16GB RAM. Four 4GB LPARs will be defined across the two systems, again only 3 will be active at once. To isolate the test and production environment, the test environment is managed by two IVMs.
Two LPARs have been created on each test server. The administrator initiates a Live Partition Mobility operation to test moving LPARs between the servers.
The migrlpar command fails to migrate the 4th LPAR with the following error:
"The target managed system does not have enough available memory to create the partition."
Because the 4th LPAR was inactive, it was expected that an inactive migration would be successful.
Why would this inactive migration fail on the test environment, but succeed on the production environment?
Correct Answer: A
Question 6
A customer will be ordering a number of small POWER7 machines which require that PCIe cards be placed in a particular configuration. These will be shipped to small customer branches where technical resource is limited. Which feature will direct IBM manufacturing to place PCIe cards as required?
Correct Answer: C
Question 7
A Linux LPAR is configured using 802.1Q.
The virtual Ethernet device is configured as an 802.1Q compatible adapter and has VLAN
ID 5 configured in the 802.1Q additional VLAN field.
The administrator runs the following commands on the Linux LPAR shell without errors:
vconfig add eth0 5ifconfig eth0 10.0.0.2 netmask 255.255.255.0
When the administrator tries to ping 10.0.0.1, the request times out.
What is the problem?
The virtual Ethernet device is configured as an 802.1Q compatible adapter and has VLAN
ID 5 configured in the 802.1Q additional VLAN field.
The administrator runs the following commands on the Linux LPAR shell without errors:
vconfig add eth0 5ifconfig eth0 10.0.0.2 netmask 255.255.255.0
When the administrator tries to ping 10.0.0.1, the request times out.
What is the problem?
Correct Answer: B
Question 8
A redundant pair of VIO Servers is used to virtualize the same SAN LUNs to a number of AIX LPARs. To ensure that Multipath 10 is correctly configured an administrator sets the appropriate device attributes on the vSCSI disks on the clients.
One of the VIO Servers was shut down for 5 minutes to simulate a failure. After the VIO Server was brought back online, the administrator found that some LPARs recovered their storage paths automatically, yet some LPARs did not recover their paths at all.
How can the administrator recover from the lack of path recovery?
One of the VIO Servers was shut down for 5 minutes to simulate a failure. After the VIO Server was brought back online, the administrator found that some LPARs recovered their storage paths automatically, yet some LPARs did not recover their paths at all.
How can the administrator recover from the lack of path recovery?
Correct Answer: A
