100% Pass Your 1Z0-1066-20 Exam Dumps at First Attempt with Actualtests4sure
Penetration testers simulate 1Z0-1066-20 exam PDF
NEW QUESTION 34
Which four actions does Demand Management enable you to do? (Choose four.)
- A. Run an unlimited number of forecast simulations to see impacts of changes in the price, running a marketing campaign, shift in weather, demand upside request, and so on.
- B. Perform side-by-side analysis on a multiple number of scenarios, and see the impact on operational and financial objectives.
- C. Simulate the impact of introducing new products in particular geographic areas.
- D. Simulate changes to the dependent options forecast for build to stock items.
- E. Simulate how changes to forecasting models and parameters have an immediate impact on the statistical forecast.
Answer: A,C,E
NEW QUESTION 35
You ran a demand plan with the data refresh option "Do not refresh with current data." Identify two true statements. (Choose two.)
- A. Forecasting engine will not run.
- B. Shipments forecast data will not be modified.
- C. Forecasting engine will run without advancing the plan date.
- D. Shipments history data will not be modified.
- E. Shipments history data will be updated.
Answer: C,D
NEW QUESTION 36
You analyzed your customer's shipment history data at item and organization level. You found that the customer has many new products with limited history.
Does Planning Central support forecasting products with limited history, and what is this process called?
- A. Yes, Planning Central supports the Holt Exponential Smoothing forecasting method used for newly introduced products.
- B. No, Planning Central does not support the Croston Method for Sparse Demand forecasting method.
- C. Yes, Planning Central supports the Regression for Sparse Demand forecasting method, typically used for new products.
- D. No, Planning Central does not support the Regression for Sparse Demand forecasting method.
- E. No, Planning Central does not support the Holt Exponential Smoothing forecasting method.
Answer: A
NEW QUESTION 37
As part of the agreement with one of your suppliers, you must always order product by the 100s. For example, if the required supply is 105, you must order 200, if it's 275, you must order 300. Which item attributes will help you achieve this?
- A. Maximum Order Quantity
- B. Fixed Lot Size Multiplier
- C. Minimum Order Quantity
- D. Fixed Order Quantity
- E. Rounding
Answer: B
NEW QUESTION 38
Your client wants to utilize product categories on sourcing rules. They have created a new category for this and populated the items for it.
Where do they set up the category planning uses when evaluating sourcing rules?
- A. Manage Assignment Sets
- B. Manage Planning Profile Options
- C. Manage Sourcing Rules
- D. Manage Planning Source Systems
- E. Manage Plans
Answer: A
NEW QUESTION 39
Which four types of items are eligible to be included as Supply Planned Items in the Supply Plan? (Choose four.)
- A. All sales orders
- B. WIP components
- C. Demand plan items
- D. Purchased Items
- E. Supply plan items
- F. All planned items
Answer: A,B,C,F
NEW QUESTION 40
In which situation would Bills of Distribution be more effective than Sourcing Rules?
- A. When Organization A buys from a Supplier; Organization B transfers from Organization A, and Organization C transfers from Organization B
- B. When Organization A, Organization B, and Organization C transfer from Organization C
- C. When all organizations are buying from a single outside supplier
- D. When all organizations transfer 50% of the material from Organization B, and 50% from Organization C
- E. When Organization A, Organization B, and Organization C make their own products
Answer: A
NEW QUESTION 41
Demand planner opens the pre-seeded plan summary of the demand plan and wants to analyze the forecast results. Describe the steps to review and analyze the forecast results.
- A. Click "Forecast Comparison in the thousands" tile. Review "Forecast Comparison by Product Category" graph and pick a product category. Right-click on product category, click Drill To -> Default Group -> Forecast Analysis to open the table and review the details.
- B. Click "Demand at Risk in thousands" tile. Review "Demand at Risk by Product Category" graph and pick a product category. Right-click on product category, click Drill To -> Default Group -> Demand Analysis to open the table and review the details.
- C. Click "Revenue and Margin" tile. Review the "Revenue by Period" graph and pick a specific period.
Right-click on a period, click Drill To -> Default Group -> Revenue Analysis to open the table and review the details. - D. Click "Revenue and Forecast" tile. Review "Revenue by Period" graph and pick a specific period.
Right-click on a period, click Drill To -> Default Group -> Forecast Analysis to open the table and review the details.
Answer: A
Explanation:
NEW QUESTION 42
As a new planner, you want to test simulation set functionality. You have created a simulation set named
'Test Simulation Set.' In this simulation set, you have already added Item 98573. You would like to change the item specification 'Fixed Order Quantity' to 10 within this simulation set.
Which sequence will allow you to accomplish this task?
- A. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'View'
> Select 'Columns' > Check box next to Fixed Order Quantity specification> the 'Fixed Order Quantity' will now show on the Item 98573 line > Highlight line for Item 98573 and scroll right until you find
'Fixed Order Quantity' > Change value to 10 - B. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight line for Item 98573 and scroll right until you find 'Fixed Order Quantity' > Change value to 10
- C. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'Action'
> Select 'Edit' > Find Fixed Order Quantity specification> under the 'Action' column select 'set value as' > under the 'Value' column enter 10 - D. Select and open 'Test Simulation Set' > Search and select Item 98573 > Highlight item > Select 'Action'
> Select 'Edit' > Find Fixed Order Quantity specification> under the 'Action' column select 'reset to original' > under the 'Value' column enter 10
Answer: C
NEW QUESTION 43
During the FIFO pegging process, what is the correct order in which the supplies are sorted?
- A. Peg unreserved demands first and then demands with reservations
- B. Pegging process does not respect reservation, and demands are sorted based on due dates
- C. Pegging process sorts demands by due dates followed by reservation status
- D. Peg demands with reservations first and then peg demands that do not have reservations
- E. Pegging process does not respect reservation, and demands are sorted based on demand and supply types
Answer: D
NEW QUESTION 44
You want to check how many items have excess inventory. Where must you go in Planning Central to find this information?
- A. Configure Exceptions > Expand Demand Planning Exceptions > Select Item With Excess Inventory
- B. Manage Plans > Edit Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory
- C. Open Table, Graph, or Tile Set > Search Exceptions > Open > Expand Supply Planning Exceptions > Select Item with Excess Inventory
- D. Manage Plans > Edit Demand and Supply Plan > Select Supply tab > Navigate to Item area > Filter by Items with Excess Inventory
- E. Configure Exceptions > Expand Supply Planning Exceptions > Select Item With Excess Inventory
Answer: C
Explanation:
NEW QUESTION 45
A customer has created a supply plan based on current requirement. Due to changes in third party forecast, the plan must be rerun with these recent updates. However, while this new information became available, existing supply like on-hand inventory and work order completions have also been updated.
Which data refresh option should be used to reflect all these changes in the plan?
- A. Refresh with current data
- B. Refresh with quick refresh option
- C. Refresh with selected current data
- D. Do not refresh with current data
- E. Refresh with forecast data
Answer: A
NEW QUESTION 46
Which two statements are true regarding Planning Business Flows? (Choose two.)
- A. Inventory Planning cannot run in the Planning Business Flows.
- B. Demand and Supply Planning have to be run in separate business flows.
- C. Planners can set up automatic release rules or release orders manually as part of the plan execution.
- D. You can analyze and adjust data at any stage of the process.
- E. In automated plans, all release rules must be automatic.
Answer: C,D
NEW QUESTION 47
Your client wants their supply plans to have a customized group of exceptions. What two steps must you complete in order to make sure only these exceptions are included when running all of your client's supply plans? (Choose two.)
- A. Manage Plans > Select each supply plan > Edit each supply plan > Add your exception set to Plan Options for each supply plan
- B. Manage Plans > Select each supply plan > Edit each supply plan > Manually add each exception specified by client
- C. Configure Exceptions > Expand Supply Planning Exceptions > Highlight lines with exceptions specified by client > Click 'Add to Exception Set'
- D. Configure Exception Sets > Create exception set > Add exceptions specified by client
- E. Select 'Add to Supply Plan' button > Select which supply plans you want to have this group of exceptions
Answer: A,D
NEW QUESTION 48
Which statement applies only to the planning of back-to-back items and not standard items?
- A. Must use Global Order Promising and Supply Chain Orchestration to release and create new supplies
- B. Planning collects bookings or shipments history to forecast items.
- C. Planning analyzes supply shortages and capacity overloads using any of the standard planning tools.
- D. Planning pegs reserved supplies to sales orders.
- E. Must have added sourcing rules to the Global Order Promising assignment set.
Answer: A
Explanation:
NEW QUESTION 49
A supply plan has just been run that contains a configured item. You notice that the sourcing rules of the base model were used instead of sourcing rules for the configured item. Why did this happen?
- A. It is not possible to create sourcing rules for the configured item; all configured items always use the same sourcing rules as the base model.
- B. The sourcing rules of the base model had a priority of 1, while the sourcing rules of the configured item had a priority of 2.
- C. No sourcing rules have been defined for the configured item.
- D. No planning percentages were defined at the operation level within the work definition.
- E. The sourcing rules of the base model overrode the sourcing rules of the configured item.
Answer: C
NEW QUESTION 50
During an implementation, customer is in the process of planning supply requirements. Customer also needs to generate forecast and safety stock levels. Which plan type on the plan options should the customer be running?
- A. Supply Plan
- B. Integrated Plan
- C. Safety Stock and Forecast Plan
- D. Demand Plan
- E. Demand and Supply Plan
Answer: E
NEW QUESTION 51
......
All 1Z0-1066-20 Dumps and Training Courses: https://www.actualtests4sure.com/1Z0-1066-20-test-questions.html
