2024 Easily pass C_IBP_2302 Exam with our Dumps & PDF Test Engine
C_IBP_2302 PDF Pass Leader, C_IBP_2302 Latest Real Test
NEW QUESTION # 36
Which of the following are features of lag-based snapshots?Note: There are 2 correct answers to this question.
- A. Target key figures for these snapshots are exposed to the user in planning views.
- B. The number of lag-based snapshots are limited to nine levels.
- C. Lag-based snapshots are created in the Configuration app for a fixed time range.
- D. Target key figures for these snapshots must have lag as a root attribute in its base planning level.
Answer: C,D
NEW QUESTION # 37
Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app?Note: There are 2 correct answers to this question.
- A. Identifiy intermittent demand for Forecast Error CV calculations
- B. Adjust for forecast bias in Forecast Error CV calculations
- C. Adjust Safety Stock Recommendations based on forecast error CV input
- D. Propagate forecast error to upstream locations in a supply chain network
Answer: B,C
NEW QUESTION # 38
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?
- A. Created as type INTEGER and assigned to a simple master data type
- B. Created as type NVARCHAR and assigned to an external master data type
- C. Created as type DECIMAL and assigned to a compound master data type
- D. Created as type INTEGER and assigned to a compound master data type
Answer: C
NEW QUESTION # 39
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.
- A. Minimum Lot Size
- B. Transportation Lead Time Error CV
- C. Target Service Level
- D. Holding Cost Percentage
Answer: A,C
NEW QUESTION # 40
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.
- A. A currency conversion key figure, such as exchange rate
- B. A special key figure marked as an aggregate key figure (aggregate constraint)
- C. A unit of measure key figure, such as UOMCONVERSIONFACTOR
- D. A forecast metric key figure, such FCSTMAPE
Answer: B,C
NEW QUESTION # 41
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note: There are 3 correct answers to this question.
- A. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- B. These filters can be used together with attribute totals in the same planning view.
- C. These filters are always applied based on the values stored in the database.
- D. You can add (or delete) planning objects to a planning view after these filters are applied.
- E. You can only apply one value-based filter per planning view.
Answer: A,C,E
NEW QUESTION # 42
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?
- A. Download the Rejection Report in the Data Integration app.
- B. Navigate to the Master Data Workbook in Excel and open the Log.
- C. Navigate to the Manage Master Data app and open the Log.
- D. Download the Initial Problem Report in the Data Integration app.
Answer: C
NEW QUESTION # 43
You are working with inventory key figures.What are some of the business scenarios where you can use the Last Period Aggregation function?Note: There are 2 correct answers to this question.
- A. Calculating the value of inventory on any time profile level ensuring flexibility of calculation
- B. Calculating the value of inventory on a weekly basis, using static aggregation from the daily level
- C. Calculating how many periods inventory is going to last based on the planned demand
- D. Search for and return the last not null value of the inventory key figure
Answer: C,D
NEW QUESTION # 44
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note: There are 2 correct answers to this question.
- A. Splitting the values from detailed to aggregated level by using a copy operator
- B. Splitting the values from aggregated to detailed level using multiplication by the proportions
- C. Splitting the values from aggregated to detailed level, based on the time profile attribute
- D. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
Answer: B,D
NEW QUESTION # 45
Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.
- A. Consideration of demand-driven analysis for buffer positioning.
- B. Demand sensing of demand data using predictive analytics tools
- C. Embedded, on-the-fly demand analytics
- D. Detailed statistical analysis of demand data using predictive analytics tools
Answer: C,D
NEW QUESTION # 46
You are reviewing the master data types that are often used for supply and inventory planning
.Which master data types are compound master data types?Note: There are 2 correct answers to this question.
- A. SOURCELOCATION
- B. SOURCECUSTOMER
- C. SOURCECUSTGROUP
- D. SOURCEPRODUCTION
Answer: A,B
NEW QUESTION # 47
What are the S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments Additional tiering costs (default) Inventory days of supply
- B. Number of fair share segments Additional tiering costs (default) Maximum inventory
- C. Number of fair share segments Maximum days of coverage Number of fair share segments late delivery
- D. Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery
Answer: D
NEW QUESTION # 48
You need to create time periods for the time profile in a planning area.What should you be aware of when running the Create Time Periods application job?
- A. A time profile has to be activated so that the application job can proceed.
- B. The assigned Planning Area must be active.
- C. In the Parameter Section of the application job, choose the Time Profile ID and Planning Area.
- D. This application job can be run for multiple time profiles at once.
Answer: C
NEW QUESTION # 49
For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?
- A. Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.
- B. Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.
- C. Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.
- D. Merge analytics and alerts into a new planning area from any sample planning area.
Answer: C
NEW QUESTION # 50
What are the outputs of the Calculate Target Inventory Components Operator?Note: There are 3 correct answers to this question.
- A. Component Usage
- B. Target Pipeline Stock
- C. Recommended Safety Stock
- D. Target Cycle Stock
- E. Reorder Point
Answer: B,C,D
NEW QUESTION # 51
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.
- A. Keep the number of fairshare segments small.
- B. Avoid using telescopic time buckets.
- C. Increase the use of incremental lot size beyond the frozen horizon.
- D. Split into multiple planning areas to support weekly vs. daily planning needs.
- E. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.
Answer: B,D,E
NEW QUESTION # 52
Which of the following key functions are supported by SAP IBP for sales and operations?Note: There are 2 correct answers to this question.
- A. Simple statistical forecast
- B. Multi-Level Supply Planning Heuristics
- C. Time series analysis
- D. Scenario analysis for operational supply planning
Answer: A,B
NEW QUESTION # 53
How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle?Note: There are 2 correct answers to this question.
- A. Simulate demand sensing inputs for Supply Review
- B. Model inventory turns based on Target Safety stocks
- C. Simulate statistical forecast at the Demand Review stage
- D. Simulate heuristics run in Supply Review stage
Answer: C,D
NEW QUESTION # 54
For which of the following application jobs can you enter planning filters as parameters?Note: There are 2 correct answers to this question.
- A. Purge Master Data
- B. Purge Non-Conforming Data
- C. Create Time Periods for Time Profiles
- D. Purge Key Figure Data
Answer: A,D
NEW QUESTION # 55
......
C_IBP_2302 Dumps Ensure Your Passing: https://www.actualtests4sure.com/C_IBP_2302-test-questions.html
