[2024] Get Top-Rated Cisco 350-601 Exam Dumps Now
Passing Key To Getting 350-601 Certified Exam Engine PDF
Cisco 350-601 certification exam is ideal for professionals who want to demonstrate their expertise in the design and implementation of data center technologies. Candidates who pass the exam can demonstrate their ability to design, configure, and manage complex data center infrastructure solutions. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification is particularly relevant for network engineers, systems engineers, network administrators, and technical support engineers.
NEW QUESTION # 192
Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch. Which statement is true?
- A. Access to a command takes priority over being denied access to a command.
- B. The first role assigned takes precedence over subsequent roles.
- C. The last role assigned takes precedence over previous roles.
- D. Any commands that have conflicting settings between roles are denied.
Answer: A
Explanation:
The statement that is true about the behavior of multiple roles applied to a user on the Cisco MDS 9000 Series Switch is that access to a command takes priority over being denied access to a command. This means that if a user has multiple roles assigned and one of the roles grants access to a command while another role denies access to the same command, the user will be able to execute the command. The access permission overrides the deny permission in case of a conflict. The other statements are not true because:
* Any commands that have conflicting settings between roles are not denied. As explained above, the access permission prevails over the deny permission in case of a conflict.
* The first role assigned does not take precedence over subsequent roles. The order of role assignment does not affect the command authorization. All roles assigned to a user are evaluated together and the most permissive setting is applied.
* The last role assigned does not take precedence over previous roles. The order of role assignment does not affect the command authorization. All roles assigned to a user are evaluated together and the most permissive setting is applied. References: For more information on how to configure and manage roles on the Cisco MDS 9000 Series Switch, please refer to the following resources:
* Cisco MDS 9000 Family NX-OS Security Configuration Guide
* Cisco MDS 9000 Family NX-OS System Management Command Reference
NEW QUESTION # 193
APIC EPG Resolution Immediacy is set to "Immediate" Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?
- A. If "immediate" is selected the policy is programmed in the hardware as soon as the leaf is booted.
- B. If "On demand" is selected the policy is programmed in the hardware only when the first packet is received through the data path.
- C. If "On demand" is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EPG.
- D. The "Immediate" and "On demand" options require a port group to be created on the VDS.
Answer: B
NEW QUESTION # 194
In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two)
- A. frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender
- B. frames that were sent on the link but not yet received.
- C. frames that were sent with high credit
- D. frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender.
- E. frames that were sent on the link and received.
Answer: A,B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/fcoe/config/ cisco_nexus7000_fcoe_config_guide_8x/configuring_fcoe.html
NEW QUESTION # 195
Refer to the exhibit.
A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch. What is the destination IP address of the vPC keepalive packets that are sent by the switch?
- A. 192.168.254.1
- B. 192.168.254.4
- C. 192.168.254.2
- D. 239.255.70.83
Answer: B
NEW QUESTION # 196
What is a characteristic of electronic programmable logic device (EPLD) software upgrades?
- A. EPLD software must be upgraded when Cisco MDS NX-OS is upgraded.
- B. ELPD module upgrades are nondisruptive
- C. ELPD upgrades are available for fabric and power supply modules.
- D. EPLD software should be upgraded only when instructed by Cisco TAC
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.html
NEW QUESTION # 197
Refer to the exhibit.
An engineer needs to implement a monitoring session that should meet the following requirements:
* Monitor traffic from leaf to leaf switches on a Cisco ACI network
* Support filtering traffic from Bridge Domain or VRF
Which configuration must be added to meet these requirements?
- A. filter tenant t1 application app1 epg epg1
- B. interface eth 1/2 leaf 101
- C. application epg epg1 app1
- D. interface eth 1/2 switch 101
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/troubleshooting/b_APIC_Troubleshooting/b_APIC_Troubleshooting_chapter_0110.html
NEW QUESTION # 198
An engineer must affirm the identity of the Cisco UCS Manager after a valid CA-signed keyring for HTTPS access is created.
Which action completes the configuration?
- A. Set Cipher Suite Mode
- B. Implement SSLv3
- C. Create a trusted point
- D. Enable TLSv1.2
Answer: C
NEW QUESTION # 199
A DevOps engineer must implement a bash script to query a REST API and return the available methods. Which code snippet completes the script?
- A. TRACE
- B. DELETE
- C. OPTIONS
- D. POST
Answer: D
NEW QUESTION # 200
Refer to the exhibit.
An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
- E. Option E
Answer: B,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/421_n1_1/ b_Cisco_n5k_fcoe_config_gd_re_421_n1_1/Cisco_n5k_fcoe_config_gd_re_421_n1_1_chapter4.html
NEW QUESTION # 201
Refer to the exhibit.
An administrator is deploying BGP to geographically connect two data center sites. Both sites are configured for dual-stack routed protocols. The administrator must inject the IPv6 network 2001:AE4:1::/64 into the IPv6 unicast database. Drag and drop the SiteA commands from the right into the blanks in the configuration on the left. Commands are used more than once.
Answer:
Explanation:
Explanation:
A screenshot of a computer Description automatically generated
NEW QUESTION # 202
Refer to the exhibit.
Which action must be taken before the maintenance policy can be committed?
- A. Specify a maintenance time by selecting a schedule.
- B. Set the soft shutdown timer to a specific time.
- C. Associate a service profile to the maintenance policy.
- D. Set the policy to apply the change on the next reboot.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Admin- Management/3-1/b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_3_1/ b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_3_1_chapter_01100.html
NEW QUESTION # 203
A Cisco Nexus 7000 Series switch runs VXLAN, and interface Ethernet 7/30 is configured as a trunk port.
Which command set configures the switch to act as a gateway for VLAN 50?
interface Ethernet7/30
no switchport
no shutdown
service instance 1 vni
no shutdown
- A. encapsulation profile vni VSI_50_TO_500
dot1q 500 vni 50
bridge-domain 500
member vni 50
interface Bdi500
jp address 10.50.50.51/24 - B. encapsulation profile VSI_50_TO_500 default
- C. encapsulation profile vni VSI_50_TO_500
dot1q 50 vni 500
bridge-domain 50
member vni 500
interface Vlan50
ip address 10.50.50.51/24 - D. encapsulation profile vni VSI_50_TO_500
dot1q 500 vni 50
bridge-domain 500
member vni 50
interface Vlan500
ip address 10.50.50.51/24 - E. encapsulation profile vni VSI_50_TO_500
dot1q 50 vni 500bridge-domain 50
member vni 500
interface Bdi50
ip address 10.50.50.51/24
Answer: E
Explanation:
To configure a Cisco Nexus 7000 Series switch to act as a gateway for VLAN 50 in a VXLAN environment, the correct command set includes defining a service instance for the VLAN, specifying the encapsulation profile, and associating the VLAN with a bridge domain and a VNI. The commands should map VLAN 50 to VNI 500 and then configure an SVI (Switched Virtual Interface) for VLAN 50 with an IP address. This allows the switch to route traffic for VLAN 50, acting as a gateway1.
References := For detailed configuration steps and explanations, you can refer to the Cisco Nexus 7000 Series NX-OS VXLAN Configuration Guide, which provides comprehensive information on setting up VXLAN gateways and integrating VXLAN with traditional VLANs
NEW QUESTION # 204
Which two statements about OTV are true?(Choose two)
- A. no special license is required for OTV.
- B. Only one join interface can be specified per overlay.
- C. The authoritative edge device is the active forwarder for multicast and unknown unicast for all VLANs.
- D. OTV requires a separate VDC if SVIs for the extended VLANs are to be configured on the same switch.
- E. OTV runs over a distance victor routing protocol.
- F. The join interface must be a Layer 2 interface.
Answer: B,D
NEW QUESTION # 205
Refer to the exhibit.
The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?
- A. N7K-1 preempts N7K-2 as the STP root.
- B. N7K-1 and N7K-2 appear as a single STP root.
- C. N7K-2 appears as the STP root.
- D. N7K-1 appears as the STP root.
Answer: B
NEW QUESTION # 206
Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: B
NEW QUESTION # 207
A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch configuration. The backup must be made to an external backup server. The only protocol permitted between the Cisco Nexus Series switch and the backup server is UDP. The backup must be used when the current working configuration of the switch gets corrupted. Which set of steps must be taken to meet these requirements?
- A. 1. Perform a startup-config backup to an FTP server. 2. Copy startup-config in the boot flash to the running-config file.
- B. 1. Perform a running-config backup to an SFTP server. 2. Copy backup-config from the SFTP server to the running-config file.
- C. 1. Perform a running-config backup to an SCP server. 2. Copy running-config in the boot flash to the running-config file.
- D. 1. Perform a startup-config backup to a TFTP server. 2. Copy backup-config from the backup server to the running-config file.
Answer: D
Explanation:
TFTP runs on UDP 69 = Is correct
NEW QUESTION # 208 
Refer to the exhibit. Which feature set must be used to configure on switch 2 to establish a VSAN trunk between switch 1 and switch 2?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: A
NEW QUESTION # 209
An engineer must create a scheduler configuration to create two backup jobs per day.
The backup file must be copied to a server in the operations VRF.
Which configuration accomplishes this task?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 210
Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: B
NEW QUESTION # 211 
Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: B
NEW QUESTION # 212
Which two configuration settings are available in the Cisco UCS Firmware Auto Sync Server policy? (Choose two.)
- A. User Acknowledge
- B. User Notification
- C. Immediate Action
- D. No Action
- E. Delayed Action
Answer: A,D
NEW QUESTION # 213
A Cisco Nexus 9000 Series Switch experiences a startup configuration corruption. The engineer must implement a procedure to recover the backup configuration file from the switch. Which command set must be used?
- A. 1. Copy the running-configuration to the startup configuration.
2. Clear the current configuration of the switch.
3. Restart the device.
4. Copy a previously saved configuration file to the running configuration. - B. 1. Restarting device.
2. Copy the running-configuration file to a remote server.
3. Clear the current configuration of the switch.
4. Copy the running configuration to the startup configuration - C. 1. Clear the current configuration of the switch
2. Restart the device.
3. Copy a previously saved configuration file to the running-configuration
4. Copy the running-configuration to the startup configuration. - D. 1. Clear the current configuration of the switch
2. Restart the device.
3. Copy the running configuration to the startup configuration
4. Copy a previously saved configuration file to the running configuration
Answer: C
Explanation:
Rolling Back to a Previous Configuration
To roll back your configuration to a snapshot copy of a previously saved configuration, you need to perform the following steps:
1. Clear the current running image with the write erase command.
2. Restart the device with the reload command.
3. Copy the previously saved configuration file to the running configuration with the copy configuration-file running-configuration command.
4. Copy the running configuration to the start-up configuration with the copy running-config startup-config command.
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7- x/fundamentals/configuration/guide/b_Cisco_Nexus_9000_Series_NX- OS_Fundamentals_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX- OS_Fundamentals_Configuration_Guide_7x_chapter_01001.html
NEW QUESTION # 214
An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two)
- A. apply
- B. write
- C. verify
- D. commit
- E. checkpoint
Answer: C,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_7sessionmgr.html
NEW QUESTION # 215
An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity. What configuration should be implemented?
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 216
......
350-601 exam questions for practice in 2024 Updated 587 Questions: https://www.actualtests4sure.com/350-601-test-questions.html
350-601 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=193k5pKFNzpZAknMduMndPUclXNwvqc_n
