[Apr 10, 2023] Pass Your JN0-663 Dumps Free Latest Juniper Practice Tests
Get Top-Rated Juniper JN0-663 Exam Dumps Now
What is the duration of the Service Provider Routing and Switching, Professional JN0-663 Exam
- Format: Multiple choices, multiple answers
- Language: English
- Length of Examination: 120 minutes
- Number of Questions: 65
NEW QUESTION 57
Exhibit.
You are the administrator of AS 65512 You are learning the 192 168 1 0/24 prefix from both AS 100 and AS 200 You want traffic destined to the 192 168 1.0.0/24 prefix to exit your AS towards AS 200 How would you accomplish this task'?
- A. Configure an import routing policy on PE-2 to set a higher local preference value on the path learned from AS 200
- B. Configure an import routing policy on PE-2 to set a higher MED on the path learned from AS 100
- C. Configure an import routing policy on PE-2 to append the AS path attribute on the path learned from AS 100
- D. Configure an import routing policy on PE-2 to modify the origin attribute on the path learned from AS 100
Answer: C
NEW QUESTION 58
Exhibit:
All networks shown in the exhibit contain more than one BGP speaker You operate ISP A and must ensure that Customer Y sends their traffic to you over the directly connected link. Customer Y is not to be used for transit into your network.
What would you do to accomplish this task?
- A. Advertise routes to Customer Y with the well-known no-export community
- B. Advertise routes to Customer X with the custom defined 0:0 community
- C. Advertise routes to Customer X with the well-known no-advertise community.
- D. Advertise routes to Customer Y with the custom defined 65535:65535 community.
Answer: A
NEW QUESTION 59
Why do interprovider option B VPNs scale better than interprovider option A VPNs?
- A. The ASBRs in interprovider option B VPNs only carry internal routes.
- B. The ASBRs in interprovider option A VPNs only carry internal routes.
- C. The ASBRs in interprovider option B VPNs do not need per-VPN VRF tables.
- D. The ASBRs in interprovider option A VPNs do not need per-VPN VRF tables.
Answer: C
NEW QUESTION 60
Exhibit.
A customer wants to reduce LSP flooding in their IS-IS network
Which parameter should you change to accomplish this task?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: D
NEW QUESTION 61
Exhibit:
A network administrator is migrating from IPv4 to IPv6 and one of the IS-IS adjacencies is not coming up between R1 and R2.
Which action will solve the problem?
- A. Configure topologies ipv4-unicast from protocols isis on R2.
- B. Remove topologies ipv6-unicast from protocols isis on R1.
- C. Configure an IPv4 address on interface ge-0/0/1 on R1.
- D. Remove topologies ipv6-unicast from protocols isis on R2.
Answer: C
NEW QUESTION 62
You are asked to configure a series of interface policers and firewall filters, which include policers, on the same device You must ensure that the two configuration methods do not conflict.
What are two considerations when performing this task? (Choose two.)
- A. On outbound traffic, firewall filters are applied before interface policers.
- B. On inbound traffic, firewall filters are applied before interface policers.
- C. On inbound traffic, interface policers are applied before firewall filters.
- D. On outbound traffic, interface policers are applied before firewall filters.
Answer: A,C
NEW QUESTION 63 
A network administrator is investigating why traffic from R2 is not being forwarded to R1.
Referring to the show isis databasecommand output shown in the exhibit, what is causing this problem on the network?
- A. R1 is configured to drop all incoming traffic.
- B. R2 is ignoring specific LSPs from R1 in its SPF calculations.
- C. The preferred interface between R1 and R2 is experiencing errors.
- D. R1 and R2 are in different IS-IS areas.
Answer: B
NEW QUESTION 64
Which two statements are correct about Opaque LSAs in OSPF? (Choose two )
- A. Type 11 LSAs are used for MPLS label exchange and have link-local scope
- B. Type 9 LSAs are used for graceful-restart and have link-local scope
- C. Type 11 LSAs are used for MPLS traffic-engineering and have area scope
- D. Type 10 LSAs are used for MPLS traffic-engineering and have area scope.
Answer: A,B
NEW QUESTION 65
Exhibit:
A Layer 3 VPN exists in the provider network and the CE devices are connecting to the PE devices using BGP. The PE devices are receiving BGP routes from the CE devices and the PE devices have the CE BGP routes in their respective routing tables. However, the remote CE devices are not receiving the BGP routes.
Referring to the exhibit, what is the problem?
- A. The PE devices are detecting an AS loop.
- B. A VRF target community mismatch exists.
- C. The CE devices are detecting an AS loop
- D. A route distinguisher mismatch exists.
Answer: C
NEW QUESTION 66 
Which three statements are true about the show pim joinoutput shown in the exhibit? (Choose three.)
- A. This is a source-specific multicast stream.
- B. The shortest path to the source is through the RP.
- C. The multicast stream does not have an RP.
- D. The multicast receiver is still using the RP to receive the stream.
- E. The multicast stream has been configured with a backup path to allow for fast reroute.
Answer: B,C,E
NEW QUESTION 67
Exhibit.
You are provisioning Layer 2 circuits between sites CE1. CE2. andCE3
Referring to the exhibit, which statement is true?
- A. A point-to-multipoint LSP must be created between sites.
- B. Each site must have only one VLAN configured to the PE
- C. Site PE1 must have a point-to-multipoint link configured towards the core
- D. Two VLANs must be configured from PE1 to CE1.
Answer: D
NEW QUESTION 68
Exhibit:
Referring to the exhibit, which two statements about route reflectors are correct? (Choose two.)
- A. RR1 and RR2 need the same cluster ID to exchange routes learned from their clients.
- B. RR1 advertises routes learned from Client1 to RR2 with itself as the next hop.
- C. RR2 advertises routes learned from Client3 to EBGP2 with itself as the next hop.
- D. RR2 adds its cluster ID when advertising routes from Client4 to Client3.
Answer: C,D
NEW QUESTION 69
You are creating a new LDP signaled Layer 2 circuit between three customer sites.
In this scenario, which two statements are correct? (Choose two.)
- A. You are allowed to tunnel your LDP sessions through RSVP LSPs.
- B. LDP is used to exchange the virtual circuit labels with other PEs.
- C. BGP is used to exchange the virtual circuit labels with other PEs.
- D. You are not allowed to use any RSVP-signaled LSPs in your core network.
Answer: A,B
NEW QUESTION 70
Exhibit:
You are troubleshooting BGP routing issues between two MX Series routers. The BGP session is established but no BGP routes are being communicated.
What are two reasons for this problem? (Choose two.)
- A. The peers are in different ASs.
- B. table ii No export routing policy is applied.
- C. The peer type should be external.
- D. No active BGP routes are in the inet.0 table
Answer: B,D
NEW QUESTION 71
Exhibit:
A network administrator is concerned about the number of LSAs that they are observing on the network.
What will reduce Type 7 LSAs advertised from R2 to the non-backbone routers shown in the exhibit?
- A. Configure no-summaries under protocols ospf3 on R2.
- B. Configure nssa under area 0.0.0.2 on R2.
- C. Configure no-summaries under area 0.0.0.2 on R2.
- D. Configure no-naaa-abr under protocols ospf3 on R2.
Answer: D
NEW QUESTION 72
Exhibit:
Which two statements regarding the output shown in the exhibit are correct? (Choose two.)
- A. The label associated with this virtual circuit is out of range.
- B. The type of connection is remote.
- C. The PEs have matching control word values.
- D. The type of connection is local.
Answer: B,C
NEW QUESTION 73
......
Passing Key To Getting JN0-663 Certified Exam Engine PDF: https://www.actualtests4sure.com/JN0-663-test-questions.html
JN0-663 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=1YmVsooEoqwJOU5oKnf09qY2_DrYK-z5G
