Authentic Best resources for D-PVM-OE-23 Test Engine Practice Exam
[2024] D-PVM-OE-23 PDF Questions - Perfect Prospect To Go With Actualtests4sure Practice Exam
NEW QUESTION # 35
How many DAEs are in a fully-populated PowerMax 8000?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 36
Data is written on a source track and the original data needs to be preserved for a snapshot.
Which technology does TimeFinder SnapVX use to prevent a new from being demoted to a lower tier?
- A. Copy-on-write
- B. Redirect-on-write
- C. Copy mode
- D. NoCopy mode
Answer: B
NEW QUESTION # 37
How many pointers can be stored per Deduplication Management Object (DMO)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 38
When is the SRP Utilization Alert enabled in a VMAX3 array?
- A. During the Unisphere for VMAX installation.
- B. An SLO has been applied to a Storage Group.
- C. An SLO has been applied to a TDEV.
- D. During the Solutions Enabler installation.
Answer: A
NEW QUESTION # 39
Which software is used to create file systems and shares on a VMAX3 eNAS system?
- A. Unisphere for VNX
- B. Solutions Enabler SYMCLI
- C. Unisphere for VMAX
- D. Data Mover Command Line
Answer: A
NEW QUESTION # 40
If a device is listed in both the gkselect and the gkavoid files, what will happen during the selection of Gatekeepers?
- A. Gatekeeper selection process will move the device to the top of the selection list
- B. gkselect takes precedence; Gatekeeper selection process will use the device
- C. gkavoid takes precedence; Gatekeeper selection process will not use the device
- D. Gatekeeper selection process will try to avoid using the device; however, the device may be used if absolutely necessary
Answer: C
NEW QUESTION # 41
Which command enables consistency protection for devices in Concurrent SRDF?
- A. symcfg enable consistency
- B. symrdf enable consistency
- C. symrdf enable
- D. symcg enable
Answer: D
NEW QUESTION # 42
On which level does the FAST engine perform data movement on VMAX3 arrays?
- A. Sub-LUN
- B. Policy
- C. LUN
- D. Storage Group
Answer: A
NEW QUESTION # 43
What is a consideration for autoprovisioning groups on VMAX3 arrays?
- A. A port may only belong to one Port Group
- B. An initiator may only belong to one Initiator Group
- C. Maximum number of levels of cascading permitted in a Storage Group is 64
- D. A device cannot belong to more than one Storage Group
Answer: B
NEW QUESTION # 44
From an application perspective, what should be done prior to performing an SRDF Restore operation?
- A. Continue accessing the R1 devices. Stop accessing the R2 devices
- B. Continue accessing the R1 and R2 devices
- C. Stop accessing the R1 devices. Continue accessing the R2 devices
- D. Stop accessing the R1 and R2 devices
Answer: D
NEW QUESTION # 45
VMAX3 devices 00011 through 00014 are 100 GB in size.
What will the size of the devices be after the symdev modify -devs 00011:00014 -cap 400 -captype gb - tdev SYMCLI command is executed?
- A. 200 GB
- B. 400 GB
- C. 1600 GB
- D. 500 GB
Answer: B
NEW QUESTION # 46
Refer to the Exhibit.
Production work has been resumed on the R2 devices after an SRDF Failover operation.
Where will the changes made to the R2 device be reflected in an SRDF Query?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 47
Which device type can be used as a Gatekeeper?
- A. BCV
- B. TDAT
- C. VDEV
- D. TDEV
Answer: C
NEW QUESTION # 48
How does Unisphere 360 differ from Unisphere for PowerMax?
- A. Unisphere for PowerMax provides only GUI access to PowerMax and VMAX arrays. Unisphere 360 provides both GUI and SYMCLI access to PowerMax and VMAX arrays.
- B. Unisphere for PowerMax provides centralized monitoring for DMX, VMAX Family, and PowerMax arrays. Unisphere 360 is the management console for PowerMax and VMAX Family arrays.
- C. Unisphere for PowerMax is the management console for PowerMax and VMAX Family arrays.
Unisphere 360 provides centralized monitoring for DMX, VMAX Family, and PowerMax arrays. - D. Unisphere for PowerMax provides both GUI and SYMCLI access to PowerMax and VMAX arrays.
Unisphere 360 provides only GUI access to PowerMax and VMAX arrays.
Answer: C
NEW QUESTION # 49
A storage administrator wants to install a Unisphere for VMAX server on a management host that does not have direct connectivity to a VMAX3 array.
Which daemon is used to give this Unisphere server access to the SYMAPI server over the IP network?
- A. storapid
- B. storstpd
- C. storsrvd
- D. storevntd
Answer: C
NEW QUESTION # 50
Which type of RDF devices are used on the secondary site of Cascaded SRDF environments?
- A. R22
- B. R12
- C. R21
- D. R11
Answer: C
NEW QUESTION # 51
You are in a meeting with a customer describing the features of VMAX3 arrays. The customer wants to know more about VMAX3 configuration changes that can be performed with Unisphere for VMAX.
Which objects can be configured with Unisphere for VMAX?
- A. Thin devices, Storage Resource Pools, and Masking Views.
- B. Thin devices and Autoprovisioning Groups.
- C. Data Pools and Storage Resource Pools.
- D. Disk Groups, Data Pools, and Autoprovisioning Groups.
Answer: B
NEW QUESTION # 52
What is the recommended maximum distance for an SRDF/S solution?
- A. 250 km
- B. 200 km
- C. 100 km
- D. 125 km
Answer: B
NEW QUESTION # 53
......
Best updated resource for D-PVM-OE-23 Online Practice Exam: https://www.actualtests4sure.com/D-PVM-OE-23-test-questions.html
