CompTIA Exam 2024 220-1101 Dumps Updated Questions UPDATED Nov-2024
Get The Most Updated 220-1101 Dumps To A+ Certification
CompTIA 220-1101 exam is divided into different sections that cover various topics, including mobile devices, networking, hardware, virtualization and cloud computing, and troubleshooting. 220-1101 exam consists of 90 multiple-choice questions that need to be completed within 90 minutes. To pass the exam, candidates need to achieve a score of at least 675 out of 900. 220-1101 exam is available in multiple languages, including English, Japanese, German, and Spanish, among others. Passing 220-1101 exam demonstrates that the candidate has a solid foundation in computer technology and is ready to pursue a career in the IT industry.
NEW QUESTION # 107
A company wants to use client-side visualization for application testing. Which of the following configurations would BEST support this goal?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 108
A salesperson is using a weather application on a mobile device. The application appears to be draining the device's battery very quickly. Which of the following is the BEST action for the salesperson to take in order to view weather forecasts while travelling?
- A. Manually enter office locations in the weather application.
- B. Configure less frequent location checks using cellular location services.
- C. Use the offices' Wi-Fi IP addresses as the geolocation mechanism.
- D. Enable the GPS service to ensure accurate location detection.
Answer: B
Explanation:
Reducing the frequency of location checks using cellular location services will consume less battery power while still allowing the user to view weather forecasts while travelling. The other options may not solve the battery drain issue while using the weather application.
Configuring less frequent location checks using cellular location services is the best option for the salesperson to view weather forecasts while traveling without draining the battery too quickly. Reference: https://www.makeuseof.com/tag/5-ways-improve-battery-life-android-phone/
NEW QUESTION # 109
A technician installed a Cat 5 UTP cable approximately 275ft (84m) from a network switch in an office to a workstation located on a factory floor The technician sees both a flashing green LED and a flashing orange LED on the workstation's NIC. Which of the following should the technician do FIRST?
- A. Replace the entire run of Cat 5 UTP cable with Cat 5 STP cable.
- B. Check for loose connections, pinched bends, and physical damage.
- C. Upgrade the entire cable run to multimode fiber.
- D. Install a powered hub as close as possible to the halfway point in the Cat 5 UTP cable run.
Answer: A
NEW QUESTION # 110
Several users report that a projector routinely turns off in the middle of meetings and does not tum back on immediately. Users have to wait several minutes before the projector will turn back on. When the projector is on, the picture is clear and bright. Which of the following is the most likely reason the projector is turning off?
- A. The video cable connecting the video source to the projector is failing.
- B. The bulb in the projector is failing.
- C. The outlet that the projector is plugged into is faulty.
- D. The projector is overheating and needs to be cleaned.
Answer: D
Explanation:
The projector is overheating and needs to be cleaned. A common cause of projector shutdown is overheating, which can be triggered by dust accumulation, blocked vents, or faulty fans. The projector has a thermal protection circuit that turns it off when the temperature reaches a certain level, and it will not turn back on until it cools down. To prevent this issue, the projector needs to be cleaned regularly and placed in a well-ventilated area. The video cable, the bulb, and the outlet are not likely to cause the projector to turn off intermittently.
Reference: [CompTIA A+ Core 1 (220-1101) Certification Study Guide], page 18.
NEW QUESTION # 111
A technician is on site troubleshooting a customer's laptop. The technician needs to download a software update but the company's proxy is blocking updates. Which of the following would be the MOST appropriate action for the technician to take to get the update?
- A. Request a traffic exemption.
- B. Connect to a hotspot
- C. Update the Group Policy settings
- D. Change the DNS address to 1.1.1.1
Answer: A
Explanation:
Explanation
If a technician is on site troubleshooting a customer's laptop and needs to download a software update but the company's proxy is blocking updates, the most appropriate action for the technician to take would be to request a traffic exemption from the company's IT department.
NEW QUESTION # 112
Which of the following wireless technologies has the MOST range and wireless throughput?
- A. 802. 11b/gin
- B. 802.11ac
- C. 802.11g
- D. 802.11ax
Answer: D
Explanation:
802.11ax, also known as Wi-Fi 6, has the longest range and the highest wireless throughput of all the wireless technologies listed. Reference: CompTIA A+ Certification Exam Guide, 220-1001, Chapter 3
NEW QUESTION # 113
A technician is configuring the BIOS of a new workstation. The machine will be used for data analytics, and the technician would like to maximize the performance of the CPU. Which of the following BIOS settings should the technician verify?
- A. GPU settings
- B. BIOS update
- C. Virtualization technology
- D. Hyperthreading
Answer: D
Explanation:
Hyperthreading is a feature of some CPUs that allows them to execute two threads (sequences of instructions) simultaneously on each core. Hyperthreading can improve the performance of CPU-intensive tasks, such as data analytics, by increasing the utilization of CPU resources and reducing idle time. The technician should verify that hyperthreading is enabled in the BIOS settings of the workstation.
NEW QUESTION # 114
An office manager reports that a printer is experiencing performance issues. Printouts are smudging when they are handled, and, recently whenever they need to print legal sized documents, the paper jams before anything is printed on it.
The following paper sizes are used:
Letter (8.5x11in/21.59x27.94cm)
Legal (8.5x14in/21.59x35.56cm)
Oversized (11x17in/27.94x43.18cm)
INSTRUCTIONS
Using the dropdown menus, select from the available printer parts to replace only the faulty components on the office printer to resolve the stated issues.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
Explanation:
A white printer with blue text boxes Description automatically generated
NEW QUESTION # 115
A company needs to secure remote user data with minimal interaction. Which of the following should the company do?
- A. Update firewall rule sets.
- B. Configure self-encryptinghardware.
- C. Enable BIOS passwords.
- D. Remove physical ROM drives.
Answer: B
Explanation:
Self-encrypting hardware, such as self-encrypting drives (SEDs), provides an effective solution for securing data with minimal user interaction. SEDs automatically encrypt all data stored on the drive without requiring any special software or user action, ensuring that data remains protected even if the drive is removed from the device. This feature is particularly beneficial for remote users who may not consistently follow manual encryption procedures, offering a seamless and user-transparent method to secure sensitive data.
NEW QUESTION # 116
A user's computer is not receiving a network connection. The technician confirms that the connection seems to be down and looks for the user's port on the patch panel. The port and patch panel are not labeled. Which of the following network tools should the technician use to identify the port?
- A. Network tap
- B. Toner probe
- C. Crimper
- D. Punchdown tool
Answer: A
NEW QUESTION # 117
A user contacted the help desk about files that disappeared from a laptop. The technician discovered during troubleshooting that the drive was corrupt due to a possible mechanical failure, but the files were still readable.
Which of the following actions did the technician take during troubleshooting?
(Select two).
- A. Checked S.M.A.R.T. information
- B. Ran CHKDSK
- C. Reseated the HDD connector
- D. Increased the page file size
- E. Made sure the replacement drive was compatible
- F. Updated the firmware
Answer: A,B
Explanation:
Explanation
S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) is a feature of hard drives that monitors various parameters, such as temperature, error rate, spin-up time, and seek time, to assess the health and performance of the drive. S.M.A.R.T. can also predict the likelihood of failure based on the historical trends of these parameters. A technician can check the S.M.A.R.T. information of a hard drive using various tools, such as the BIOS, the operating system, or third-party software. Checking the S.M.A.R.T. information can help the technician diagnose the cause and severity of the drive corruption and determine the best course of action.
CHKDSK (Check Disk) is a command-line utility that scans the file system and the disk surface for errors and attempts to fix them. CHKDSK can also recover readable data from bad sectors and mark them as unusable. A technician can run CHKDSK on a corrupt drive using various options, such as /f (fix errors), /r (recover data), or /x (dismount the drive). Running CHKDSK can help the technician repair the drive corruption and retrieve the missing files.
References:
How to Check Your Hard Drive's Health | PCMag1
How to Check a Disk from Windows - dummies2
How to Use CHKDSK in Windows 10 - Lifewire3
NEW QUESTION # 118
A user reports that a display is slow to turn on, and the colors are distorted and discolored. Once the display turns on, it appears to have lines going through the image and intermittently goes blank. Which of the following is the most likely cause of the issue?
- A. Incorrect data source
- B. Physical cabling issues
- C. Incorrect refresh rate
- D. Display burn-in
- E. Incorrect resolution settings
Answer: B
Explanation:
The most likely cause of the issue is C. Physical cabling issues.
Physical cabling issues can affect the quality and stability of the display signal. If the cable is loose, damaged, or bent, it may cause intermittent connection, interference, or signal loss. This can result in slow, distorted, discolored, or blank display.
To troubleshoot physical cabling issues, the user should check the following steps:
* Make sure the cable is firmly connected to both the display and the video adapter.
* Inspect the cable for any signs of damage, such as cuts, frays, kinks, or exposed wires.
* Check the cable connectors for any bent or broken pins.
* Try a different cable or a different port on the display or the video adapter.
* If possible, test the display with another device or test another display with the same device.
The other options are less likely to cause the issue, because:
* Incorrect data source may result in no display or an error message, but not slow or distorted display.
* Incorrect resolution settings may cause stretched, blurry, or cropped display, but not discolored or blank display.
* Incorrect refresh rate may cause flickering or tearing display, but not slow or distorted display.
* Display burn-in may cause permanent image retention or ghosting on the display, but not intermittent or blank display.
For more information and tips on how to fix common display problems, you can visit these links:
* How to Troubleshoot Display or Video Issues on a Dell Monitor
* Display Troubleshooting - iFixit
* How to Fix the Most Common Problems With LCD Monitors
NEW QUESTION # 119
An end user reports that the time and date on a desktop resets after shutdown, and subsequently, the device reboots. The next day, the desktop does not load the OS and is stuck at a black screen with the following message:
Which of the following would be the BEST action to take next?
- A. Replace the CMOS battery.
- B. Change the motherboard.
- C. Restore the BIOS to factory default settings.
- D. Reseat the motherboard power connections.
Answer: A
NEW QUESTION # 120
A developer is requesting permission to utilize client-side visualization. The developer would like to write code in a setting isolated from other infrastructure to avoid negative impacts of experimental code. Which of the following provides the BEST solution for the developer?
- A. Test case development
- B. Software compatibility
- C. Cross-platform functionality
- D. Sandbox environment
Answer: D
Explanation:
A sandbox environment is an isolated testing environment where code can be written and tested without impacting other infrastructure. This provides a safe and controlled environment for experimentation and development. Reference: CompTIA A+ Certification Exam Core 2 Exam Objectives - 5.5 Compare and contrast common workstation security best practices
NEW QUESTION # 121
The IT department at an insurance brokerage needs to acquire laptops that have built-in fingerprint readers in order to create a more secure environment. Which of the following would be the MOST secure way to implement the fingerprint readers?
- A. Restrict device access to only the user to whom the laptop is assigned.
- B. Grant all registered employees access to each machine.
- C. Limit device access to departments and guest users.
- D. Give each team member a USB drive that bypasses the reader to allow guest users lo log in.
Answer: A
Explanation:
Explanation
The most secure way to implement fingerprint readers would be to restrict device access to only the user to whom the laptop is assigned. This ensures that only authorized personnel have access to the device, reducing the risk of unauthorized access and data breaches.
NEW QUESTION # 122
Which of the following is the best example of when to use virtualization?
- A. To prevent users from circumventing password policies
- B. To deploy software updates to user machines
- C. To manage shared folders by user accounts
- D. To enhance security by centralizing all user desktops
Answer: D
Explanation:
One of the benefits of virtualization is that it allows you to create and manage multiple virtual machines (VMs) on a single physical computer. This can be used to enhance security by centralizing all user desktops on a server, rather than storing them on individual user machines. This way, the user desktops can be isolated from each other and from the host machine, preventing malware infections, data breaches, and unauthorized access. Additionally, the user desktops can be easily backed up, restored, updated, and monitored by the administrator, reducing the risk of data loss and downtime.
This type of virtualization is called desktop virtualization, and it separates the desktop environment from the physical hardware the user interacts with1. The user can access their virtual desktop from any device, such as a laptop, tablet, or smartphone, using a remote display protocol. The user experience is similar to using a local desktop, but with improved security and manageability.
Reference:
* What Is Virtualization, and Why Should You Use it?, section "Desktop Virtualization".
NEW QUESTION # 123
......
CompTIA A+ Certification Exam: Core 1 is a valuable certification for entry-level IT professionals looking to start their career in the IT industry. CompTIA A+ Certification Exam: Core 1 certification covers a range of topics related to hardware, software, networking, and security, making it a comprehensive validation of the candidate's technical abilities. CompTIA A+ certification is widely recognized in the IT industry and can help job seekers stand out in a competitive job market.
CompTIA Certified 220-1101 Dumps Questions Valid 220-1101 Materials: https://www.actualtests4sure.com/220-1101-test-questions.html
Current 220-1101 Exam Dumps [2024] Complete CompTIA Exam Smoothly: https://drive.google.com/open?id=1_DtolcsdiHrNaVVBj49zqZG86gxVq-y3
