Get ready to pass the 1Y0-231 Exam right now using our CCA-N Exam Package
A fully updated 2021 1Y0-231 Exam Dumps exam guide from training expert Actualtests4sure
NEW QUESTION 36
Scenario: A Citrix Administrator configured a new router that requires some incoming and outgoing traffic to take different paths through it. The administrator notices that this is failing and runs a network trace. After a short monitoring period, the administrator notices that the packets are still NOT getting to the new router from the Citrix ADC.
Which mode should the administrator disable on the Citrix ADC to facilitate the successful routing of the packets?
- A. MAC-based forwarding (MBF)
- B. USIP
- C. USNIP
- D. Layer3
Answer: A
NEW QUESTION 37
Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode. The current load-balancing setup on the Citrix ADC is:
* One load-balancing virtual server with one externally accessible VIP
* One service created for each protocol type
* One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without affecting the other servers What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?
- A. Disable the backend server entity targeted for change.
- B. Disable the load-balancing virtual server.
- C. Disable the backend service entity targeted for change.
- D. Unbind the correct server entity from the load-balancing virtual server.
Answer: D
NEW QUESTION 38
A Citrix Administrator needs to integrate an existing certification-based authentication policy into an existing Citrix Gateway virtual server.
Which three steps can the administrator take to accomplish this? (Choose three.)
- A. Enable the two-factor option on the existing CERT authentication profile.
- B. Bind the existing CERT authentication policy to the Citrix Gateway virtual server.
- C. Enable client authentication on the SSL parameters of the virtual server.
- D. Create a CERT authentication policy and bind it to the Citrix Gateway virtual server.
- E. Change the client certificate to mandatory on the SSL parameters of the virtual server.
Answer: C,D,E
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-gateway/current-release/authentication-authorization/configure- client-cert-authentication/ng-client-cert-vserver-and-bind-tsk.html
NEW QUESTION 39
A Citrix Administrator deploys a new Citrix ADC MPX appliance in the demilitarized zone (DMZ), with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the Citrix ADC?
- A. Two-arm
- B. Transparent
- C. Forward proxy
- D. One-arm
Answer: C
NEW QUESTION 40
Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator notices several entity UP and entity DOWN messages.
To what are these messages related?
- A. VLAN
- B. High availability nodes
- C. Load-balancing virtual servers
- D. SSL certificate
Answer: C
Explanation:
Explanation/Reference: https://www.reddit.com/r/Citrix/comments/bamiez/ns_study_question_help/
NEW QUESTION 41
A Citrix Administrator needs to deploy a Citrix ADC between the servers and the client, with servers only allowed to reach the client through the Citrix ADC.
In which mode should the administrator deploy the Citrix ADC?
- A. Direct server return
- B. One-arm
- C. Transparent
- D. Inline
Answer: C
NEW QUESTION 42
Which three pieces of information are required for a Citrix Unified Gateway deployment? (Choose three.)
- A. Secondary authentication for the Citrix Gateway
- B. Multiple IP addresses for user access
- C. Valid SSL certificate
- D. Content Switching virtual server
- E. Advanced license or higher
Answer: C,D,E
NEW QUESTION 43
Scenario: A Junior Citrix Administrator needs to create a content switching virtual server on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192 168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.
The following day, a Senior Citrix Administrator tests the new content switching virtual server, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.
Why has the Citrix ADC lost the newly added configurations?
- A. The junior administrator made the changes and did NOT force a failover to save the configurations.
- B. The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
- C. Both Citrix ADCs in the HA pair restarted overnight.
- D. The Citrix ADC appliances have different firmware versions.
Answer: C
NEW QUESTION 44
A Citrix Administrator receives user complaints about latency while accessing a published application that is load-balanced on the Citrix ADC.
Which Citrix Application Delivery Management (ADM) feature can the administrator use to gather information regarding response time, client network latency, and server-side processing time?
- A. WAN Insight
- B. Security Insight
- C. Gateway Insight
- D. Web Insight
Answer: D
NEW QUESTION 45
A Citrix Administrator has received a low disk space alert for /var on the Citrix ADC.
Which type of files should the administrator archive to free up space?
- A. DNScache
- B. Nsconfig
- C. Syslog
- D. Nslog
Answer: D
NEW QUESTION 46
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current Active Directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?
- A. An authentication, authorization, and auditing (AAA) action to the group
- B. A nested group to the new group
- C. A command policy to the group
- D. Users to the group on the Citrix ADC
Answer: C
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX123782
NEW QUESTION 47
A Citrix Administrator configured a Citrix Gateway virtual server for authentication, but there is no authentication policy bound to the virtual server.
Which authentication binding point will the Citrix ADC evaluate next?
- A. Override global
- B. Default global
- C. User
- D. Group
Answer: C
NEW QUESTION 48
What can a Citrix Administrator configure to filter IPv4 addresses?
- A. Citrix Web App Firewall
- B. URL set
- C. Pattern set
- D. Data set
Answer: A
NEW QUESTION 49
What is one reason a Citrix Administrator should configure the AlwaysON VPN feature?
- A. An employee starts the laptop outside the enterprise network and needs assistance to establish VPN connectivity.
- B. Management wants to regulate the network access provided to its users when they are connected to a VPN tunnel.
- C. Management wants web traffic to go out locally instead of across the VPN.
- D. An employee needs to have client choices after logging on outside the enterprise network.
Answer: B
NEW QUESTION 50
Which three Citrix Gateway elements can be configured by the Citrix Gateway Wizard? (Choose three.)
- A. The responder policy for HTTP to HTTPS redirect
- B. The bind SSL server certificate for the Citrix Gateway virtual server
- C. The rewrite policy for HTTP to HTTPS redirect
- D. The Citrix Gateway primary virtual server
- E. The primary and optional secondary authentications
Answer: B,D,E
NEW QUESTION 51
A Citrix Administrator needs to configure a Citrix Gateway virtual server to meet an organization's security requirements.
Which two types of devices can the administrator control with Endpoint Analysis (EPA) scans? (Choose two.)
- A. Android
- B. Chromebook
- C. Microsoft Windows
- D. iOS
- E. Mac
Answer: C,E
NEW QUESTION 52
Which set of items can a Citrix Administrator change when configuring a portal theme for users?
- A. Browser requirements, logo, labels
- B. Font color, labels, URL displayed
- C. Logo, background, browser requirements
- D. Logo, background, labels
Answer: D
Explanation:
Explanation/Reference:
Reference: https://support.citrix.com/article/CTX205486
NEW QUESTION 53
SAML is an authentication protocol based on _____________.
- A. YAML
- B. HTML
- C. LDAP
- D. XML
Answer: D
NEW QUESTION 54
A Citrix Administrator needs to integrate an existing certification-based authentication policy into an existing Citrix Gateway virtual server.
Which three steps can the administrator take to accomplish this? (Choose three.)
- A. Enable the two-factor option on the existing CERT authentication profile.
- B. Bind the existing CERT authentication policy to the Citrix Gateway virtual server.
- C. Enable client authentication on the SSL parameters of the virtual server.
- D. Create a CERT authentication policy and bind it to the Citrix Gateway virtual server.
- E. Change the client certificate to mandatory on the SSL parameters of the virtual server.
Answer: C,D,E
NEW QUESTION 55
Scenario: While attempting to access a web server that is load-balanced by a Citrix ADC using HTTPS, a user receives the message below:
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from getting this message?
- A. Ensure that users have the certificate's public key.
- B. Ensure that users have the server certificate installed.
- C. Ensure that the server certificate is linked to its respective intermediate and root certificates.
- D. Ensure that users have the certificate's private key.
Answer: C
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-gateway/12-1/citrix-gateway-12.1.pdf
NEW QUESTION 56
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?
- A. Turn on fail-safe mode
- B. Turn on Independent Network Configuration (INC) mode
- C. Configure SyncVLAN
- D. Turn on HA monitoring on all Interfaces
Answer: B
NEW QUESTION 57
Scenario: A Citrix Administrator currently manages a Citrix ADC environment for a growing retail company that may soon double its business volume. A Citrix ADC MPX 5901 is currently handling web and SSL transactions, but is close to full capacity. Due to the forecasted growth, the administrator needs to find a costeffective solution.
Which cost-effective recommendation can the administrator provide to management to handle the growth?
- A. A hardware upgrade to a Citrix ADC SDX 15020
- B. A license upgrade to a Citrix ADC MPX 5905
- C. A hardware upgrade to a Citrix ADC MPX 8905
- D. The addition of another MPX 5901 appliance
Answer: B
NEW QUESTION 58
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current Active Directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?
- A. An authentication, authorization, and auditing (AAA) action to the group
- B. A nested group to the new group
- C. A command policy to the group
- D. Users to the group on the Citrix ADC
Answer: C
NEW QUESTION 59
A Citrix Administrator needs to configure a Citrix Gateway virtual IP to allow incoming connections initiated exclusively from web browser sessions.
Which advanced policy will accomplish this?
- A. REQ.HTTP.HEADER User-Agent CONTAINS Chrome/78.0.3904.108 Safari/537.36
- B. REQ.HTTP.HEADER User-Agent NOTCONTAINS CitrixReceiver
- C. HTTP.REQ.HEADER("User-Agent").CONTAINS("Mozilla")
- D. HTTP.REQ.HEADER("User-Agent").CONTAINS("CitrixReceiver")
Answer: B
Explanation:
Explanation/Reference: https://stalhood2.rssing.com/chan-58610415/all_p2.html
NEW QUESTION 60
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least packets
- B. Least bandwidth
- C. Least connection
- D. Least response time
Answer: B
Explanation:
Explanation/Reference: https://kb.wisc.edu/ns/page.php?id=13201#Least%20Bandwidth%20Method
NEW QUESTION 61
......
Master 2021 Latest The Questions CCA-N and Pass 1Y0-231 Real Exam!: https://www.actualtests4sure.com/1Y0-231-test-questions.html
Practice To 1Y0-231 - Actualtests4sure Remarkable Practice On your Deploy and Manage Citrix ADC 13 with Citrix Gateway Exam: https://drive.google.com/open?id=1TmlG-ilG_jOD3PFesbT-WYr3293Un7kH
