Latest 350-801 Pass Guaranteed Exam Dumps Certification Sample Questions
New 350-801 Test Materials & Valid 350-801 Test Engine
Certification Details
- CCNP Collaboration
CCNP Collaboration, on the other hand, is a certificate that proves one's ability to work with collaboration solutions on an intermediate level. Achieving it puts you on course to attaining certification supremacy by acting as the second-best option after the above-mentioned CCIE Collaboration.
Generally, learners must pass a two-exam combination to get certified. The core test, Cisco 350-801, and a concentration one from the options listed below:
- Cisco 300-810: Implementing Cisco Collaboration Applications (CLICA)
- Cisco 300-815: Implementing Cisco Advanced Call Control and Mobility Services (CLACCM)
- Cisco 300-820: Implementing Cisco Collaboration Cloud and Edge Solutions (CLCEI)
- Cisco 300-825: Implementing Cisco Collaboration Conferencing (CLCNF)
- Cisco 300-835: Implementing Automation for Cisco Collaboration Solutions (CLAUI)
Usually, CCNP Collaboration candidates are expected to have at least three years of proven experience working with collaboration services.
- CCIE Collaboration
CCIE Collaboration is Cisco certification that relates to the expert level and addresses a solid expertise in collaboration solutions. Success in this path sets you apart as a distinguished professional who understands the ins and outs of collaboration technologies. Aside from passing the Cisco 350-801 exam, candidates must also pass one lab test to qualify for this certificate, which in this case is the Cisco CCIE Collaboration v3.0. While the vendor does not list any strict prerequisites for attaining this accreditation, the applicants are advised to have about 5 years of working experience in managing collaboration technologies.
- Cisco Certified Specialist – Collaboration Core
Finally, Cisco Certified Specialist – Collaboration Core is a title that recognizes your accomplishments at the professional level. It serves as a validation of an individual's skills and ensures a base for further advancements in the industry.
NEW QUESTION 39
Refer to the exhibit.
Endpoint A calls endpoint B.
What is the only audio codec that can be used for the call?
- A. Telephone-event/8000
- B. G722/8000
- C. G7221/16000
- D. PCMA/8000
Answer: C
NEW QUESTION 40
Where is the default for maximum session Bit Rate for a region configured?
- A. Enterprise parameters configuration
- B. Service parameter configuration
- C. Region configuration
- D. Enterprise Phone configuration
Answer: B
NEW QUESTION 41
Refer to the exhibit.
What is a possible cause of the PRI issue?
- A. The clock source is incorrect.
- B. The cable is unplugged.
- C. The framing is configured incorrectly.
- D. The controller shut down.
Answer: A
NEW QUESTION 42
Refer to the exhibit.
A call is failing to establish between two SIP Devices. The Called device answer with this SDP. Which SDP parameter causes this issue?
- A. The calling device did not offer a ptime value.
- B. The RTP port is set to 0.
- C. The payload for G.711ulaw must be 18.
- D. The media stream is set to sendonly.
Answer: B
NEW QUESTION 43
An engineer deploys a Cisco Expressway edge server for a customer who wants to utilize all feature on the server. Which feature does the engineer configure on the Expressway edge?
- A. SIP gateway for PSTN providers
- B. H.323 endpoint registration
- C. MRA
- D. VTC bridge
Answer: C
NEW QUESTION 44
Refer to the exhibit.
The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?
- A. The translation rule is not matched because DNIS contains "-".
- B. The translation rule is matched and the translated number is 02553431234.
- C. The translation rule is not matched because DNIS does not end with a "$".
- D. The translation rule is matched and the translated number is 025553431234.
Answer: B
NEW QUESTION 45
what causes poor voice quality and video pixelization in a video call?
- A. The QoS is configured incorrectly.
- B. 1 Gbps network ports are used instead of 100 Mbps network ports.
- C. Cisco Unified Communications Manager is configured to use G.711 instead G.729.
- D. A firewall is blocking the RTP ports.
Answer: A
NEW QUESTION 46
Which two configuration elements are part of the Cisco Unified Communications Manager toll-fraud prevention? (Choose two.)
- A. SUBSCRIBE calling search space
- B. SIP trunk security profile.
- C. Feature control policy
- D. Calling search space
- E. Partition
Answer: D,E
NEW QUESTION 47
Which type of greeting in the Call Handler configuration in Cisco Unity Connection overtimes all other greetings?
- A. priority
- B. supervisory
- C. holidays
- D. alternate
Answer: D
NEW QUESTION 48
Refer to the exhibit.
A call is failing to establish between two SIP Devices. The Called device answer with this SDP. Which SDP parameter causes this issue?
- A. The calling device did not offer a ptime value.
- B. The RTP port is set to 0.
- C. The payload for G.711ulaw must be 18.
- D. The media stream is set to sendonly.
Answer: B
NEW QUESTION 49
Which call routing pattern is used for phone numbers that are in the E.164 format?
- A. \+1.[2-9]XX[2-9]XXXXXX Called Party Transformation Pattern
- B. \+.! Route Pattern
- C. \+.! Translation Pattern
- D. /+! Route Pattern
Answer: A
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab12/collab12/ dialplan.html#pgfId-1591747
NEW QUESTION 50
Which command is used in Cisco IOS XE TDM gateway to configure the voice T1/E1 controller to provide clocking?
- A. Cisco IOS XE TDM gateway T1/E1 controller cannot provide clocking.
- B. clock source internal
- C. clock source line
- D. clock source network
Answer: B
Explanation:
Section: Cisco IOS XE Gateway and Media Resources
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/ guide/4gen-t1-e1-nim-guide.html
NEW QUESTION 51
What is the difference between Cisco Unified Border Element and a conventional Session Border Controller?
- A. Address hiding
- B. Voice policy
- C. DTMF interworking
- D. SIP security
Answer: B
NEW QUESTION 52
Refer to the exhibit.
An engineer is troubleshooting a codec negotiation issue where both endpoints that are involved in the call support the codecs listed in the exhibit. Which audio codec is selected il a call between two endpoints in Region 1 is placed?
- A. G.711a
- B. G.722
- C. G.729
- D. G.711u
Answer: C
NEW QUESTION 53
A collaboration engineer must configure Cisco Unified Border Element to support up to five concurrent outbound calls across an Ethernet Link with a bandwidth of 160 kb to the Internet Telephony service provider.
Which set of commands allows the engineer to complete the task without compromising voice quality?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
NEW QUESTION 54
An administrator is integrating a Cisco Unity Express module to a Cisco UCME system A test call is placed to the Cisco Unity Express pilot number, but the administrator receives a busy signal. The dial-peer is configured as follows:
How is this issue resolved?
- A. The dial-peer needs to be reconfigured to support H 323 instead of SIP.
- B. The destination pattern needs to be changed to match the dialed number of 4100.
- C. The dial-peer needs to be reconfigured to support vad.
- D. The dial-peer needs to be reconfigured to support the G.711 voice codec.
Answer: D
NEW QUESTION 55 
Refer to the exhibit. An engineer verifies the configuration of an MGCP gateway. The commands are already configured. Which command is necessary to enable MGCP?
- A. Device(config)# ccm-manager enable
- B. Device(config)# ccm-manager active
- C. Device(config)# mgcp
- D. Device(config)# mgcp enable
Answer: C
Explanation:
Section: Cisco IOS XE Gateway and Media Resources
Explanation/Reference:
https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager- callmanager/42105-vg200-cfg.html
NEW QUESTION 56
How does Cisco Unified Communications Manager perform a digit analysis on-hook versus off-hook for an outbound call from a Cisco IP phone that is registered to Cisco Unified CM?
- A. On-hook, by pressing the digits and entering "#" to process the call, Unified CM performs a digit-by-digit analysis; off-hook, Unified CM analyses all digits as a string.
- B. On-hook, no digit analysis is performed; off-hook, Unified CM requires the "#" to start the digit analysis.
- C. On-hook, Unified CM considers all digits were dialed and does not wait for additional digits; off-hook, Unified CM performs a digit-by-digit analysis.
- D. On-hook, unified CM performs a digit-by-digit analysis; off-hook, Unified CM considers all digit were dialed and dos not wait for additional digits.
Answer: C
NEW QUESTION 57
......
350-801 Sample with Accurate & Updated Questions: https://www.actualtests4sure.com/350-801-test-questions.html
350-801 Updated Exam Dumps [2021] Practice Valid Exam Dumps Question: https://drive.google.com/open?id=1VP0tc7EL2KIevhQKoYxUGEahf1vWlYfo
