Latest H3C GB0-191-ENU Dumps for success in Actual Exam Jan-2024]
Realistic GB0-191-ENU 100% Pass Guaranteed Download Exam Q&A
H3C GB0-191-ENU certification exam is an important credential for IT professionals who want to advance their career in network engineering, design, and management. Constructing Small - and Medium - Sized Enterprise Network certification exam validates the skills and knowledge of candidates in deploying, configuring, and managing small and medium-sized enterprise networks. Constructing Small - and Medium - Sized Enterprise Network certification exam also validates the ability of candidates to troubleshoot network issues and provide solutions to network problems.
H3C GB0-191-ENU exam is designed for network engineers and IT professionals who work with or plan to work with small and medium-sized enterprise networks. It is also essential for individuals who are interested in advancing their careers in network design and implementation. Furthermore, network professionals who already hold valid certifications with other vendors, such as Cisco or Juniper, can benefit greatly from getting certified in H3C technologies.
H3C GB0-191-ENU exam is designed for IT professionals who wish to validate their skills in constructing small and medium-sized enterprise networks. Constructing Small - and Medium - Sized Enterprise Network certification exam is a popular choice for individuals who want to demonstrate their expertise in designing, implementing, and maintaining network infrastructure for businesses.
NEW QUESTION # 15
The Ethernet frame exchange on the switch relies on the MAC address mapping table, which can be established by ______. (Multiple choice)
- A. Switches exchange destination location information with each other
- B. Manually add mapping entries
- C. Interactive learning of spanning tree protocol
- D. The switch learns by itself
Answer: B,D
NEW QUESTION # 16
The following statement about the functions of each layer of the OSI reference model is wrong.
- A. The network layer decides the best route for transmitting the message. The key issue is to determine how the data packet is routed from the source to the destination.
- B. The session layer is responsible for data format processing, data encryption, etc.
- C. The basic function of the transport layer is to establish and maintain virtual circuits, perform error checking and flow control.
- D. The application layer is responsible for providing network services for applications.
- E. The physical layer refers to the original bit stream transmitted on the communication channel (Channel), which defines the mechanical and electrical functions and procedures required for data transmission.
Answer: B
NEW QUESTION # 17
Methods of VLAN division include ______. (Multiple choice question)
- A. Division based on subnet
- B. Port-based division
- C. Division based on agreement
- D. Division based on port attributes
- E. Division based on MAC address
Answer: A,B,C,E
NEW QUESTION # 18
Which of the following statements about the OSPF area in the network (Area) is correct? (multiple choice)
- A. Routers in multiple OSPF areas in the same AS share the same LSDB
- B. Only OSPF routers in the same area can establish neighbors and adjacencies
- C. A router in the network may belong to multiple different areas, but one of the areas must be the backbone area
- D. A router in the network may belong to multiple different areas, but these areas may not be backbone areas
Answer: B,D
NEW QUESTION # 19
Common FTP file transfer types include ______. (Multiple choice)
- A. ASCII code type
- B. Local type
- C. EBCDIC type
- D. Binary type
Answer: A,D
NEW QUESTION # 20
In the network environment as shown in the figure, two routers are connected back to back by serial ports, and the rate of the interconnection link should be set to 2Mbps. The correct statement below is ______.
- A. Use the baudrate 2048000 command to configure on the synchronization port of the RTB
- B. It is necessary to determine the interface type and the cable meet the V.24 regulations
- C. Use bandrate 2048000 command configuration on the synchronization port of RTA, use virtual-baudrate 2048000 command configuration on the synchronization port of RTB
- D. Use the baudrate 2048000 command to configure on the synchronization port of RTA
- E. Use virtual-baudrate 2048000 command to configure on the synchronization port of RTB
Answer: D
NEW QUESTION # 21
The subnet mask of the IP address 132.119.100.200 is 255.255.255.224, so the broadcast address of the subnet where it is located is ______.
- A. 132.119.100.225
- B. 132.119.100.193
- C. 132.119.100.255
- D. 132.119.100.223
Answer: D
NEW QUESTION # 22
The two routers MSR-1 and MSR-2 complete dynamic routing learning through RIP, and you can see the following debug information on MSR-1:
*Nov 26 02:20:25:353 2008 H3C RM/6/RMDEBUG: RIP 1: Sending v2 request on Serial 0/0 from 3.3.3.3
*Nov 26 02:20:25:353 2008 H3C RM/6/RMDEBUG: RIP 1: Sending request on interface Serial0/0 from 3.3.3.3 to 224.0.0.9
*Nov 26 02:20:25:400 2008 H3C RM/6/RMDEBUG: RIP 1: Receiving v2 request on Serial0/0 from 3.3.3.1
According to the debug information, ______ can be inferred. (Multiple choice)
- A. The RIP version between the two routers is inconsistent
- B. At this time, there is no RIP routing information from MSR-2 in the MSR-1 routing table
- C. It is possible that the RIP of the two routers has just started at this time
- D. At this time, there is already RIP routing information from MSR-2 in the MSR-1 routing table
Answer: B,C
NEW QUESTION # 23
If you want to set the frame relay LMI type to ANSI, you should ______.
- A. Use the command fr lmi class ansi in interface mode
- B. Use the command fr lmi type ansi in system mode
- C. Use the command fr lmi type ansi in interface mode
- D. Use the command fr lmi class ansi in system mode
Answer: C
NEW QUESTION # 24
To set a subnet mask so that 192.168.0.94 and 192.168.0.116 are in the same network segment, the subnet mask used may be ______.
- A. 255.255.255.224
- B. 255.255.255.240
- C. 255.255.255.248
- D. 255.255.255.192
Answer: D
NEW QUESTION # 25
It is required to set a subnet mask to divide a class B network 172.16.0.0 into seven subnets, and each subnet should contain as many hosts as possible, so the subnet mask should be _____. (Dotted decimal format) slightly
Answer:
Explanation:
255.255.224.0
NEW QUESTION # 26
The IP address 203.108.2.110 is the ______ address.
- A. Type A
- B. Type C
- C. Class D
- D. Type B
Answer: B
NEW QUESTION # 27
A routing protocol is a link state routing protocol, then which of the following characteristics should this routing protocol have? (multiple choice)
- A. The routing protocol periodically sends update messages to exchange routing tables
- B. The routing protocol algorithm can effectively prevent loops
- C. This routing protocol cares about the status of links or interfaces in the network
- D. The router running the routing protocol will form a weighted directed graph containing each destination network segment according to the collected link state information
Answer: B,C,D
NEW QUESTION # 28
The role of link aggregation is ______.
- A. Increased link reliability between switches.
- B. Data load balancing can be realized.
- C. Can avoid switching network loops.
- D. Increase link bandwidth.
Answer: A,B,D
NEW QUESTION # 29
The correct statement about the IP address below is ______. (Multiple choice)
- A. IP address consists of two parts: network number and host number.
- B. Class D IP addresses are usually used as multicast addresses.
- C. The network number of the Class A IP address has 8 digits, and the actual variable number is 7 digits.
- D. Address translation (NAT) technology is usually used to solve the conversion of class A addresses to class C addresses.
Answer: A,B,C
NEW QUESTION # 30
The three MSR routers are connected as shown in the figure. All three routers belong to OSPF Area 0, and at the same time, the interconnection network segments of the three routers are advertised in Area 0 through the network command. On RTC, the network segment NET-1 is also published in OSPF Area 0 through the network command. The OSPF Cost between the three routers is shown in the figure.
At present, the neighbor status of the three routers is stable, so ______. (Multiple choice)
- A. There are two OSPF routes to the destination network segment NET-1 in the RTB routing table
- B. There is only one OSPF route to the NET-1 network segment in the RTA routing table
- C. After the network status is stable, within the next 45 minutes, only Hello packets will be transmitted between OSPF neighbors on the network
- D. For RTB, to reach the destination network segment NET-1 will give priority to RTB--->RTA--->RTC path
Answer: B,D
NEW QUESTION # 31
......
Accurate GB0-191-ENU Answers 365 Days Free Updates: https://www.actualtests4sure.com/GB0-191-ENU-test-questions.html
GB0-191-ENU DUMPS Q&As with Explanations Verified & Correct Answers: https://drive.google.com/open?id=1zGV3RZ8iKDvx3MR4qnJhwx991199CSha
