[Mar 21, 2024] Get New API-580 Certification Practice Test Questions Exam Dumps
Real API-580 Exam Dumps Questions Valid API-580 Dumps PDF
API Risk Based Inspection API-580 Exam
API Risk Based Inspection API-580 Exam is related to Risk Based Inspection Certifications. This exam validates the knowledge and skills of engineers, specialized inspectors other professionals across the entire petrochemical industry. Highly Specialized Inspectors and Engineers usually hold or pursue this certification and you can expect the same job role after completion of this certification.
The benefit in Obtaining the API-580 Exam Certification
- Risk Based Inspection Certifications provide opportunities to get a job easily in which they are interested in instead of wasting years and ending without getting any experience.
- Risk Based Inspection will be confident and stand different from others as their skills are more trained than non-certified professionals.
- Risk Based Inspection Certification is distinguished among competitors. Risk Based Inspection certification can give them an edge at that time easily when candidates appear for a job interview employers seek to notify something which differentiates the individual to another.
NEW QUESTION # 52
Who can provide useful input (such as the spectrum of process conditions, injection points etc.)To aid materials specialists in the identification of deterioration mechanisms and rates
- A. Process specialists
- B. Plant operation specialists
- C. Inspection engineers
- D. Asset integrity experts
Answer: A
NEW QUESTION # 53
Following are the critical variables for deterioration mechanism except
- A. Insulation
- B. Process operating
- C. Start up and shut down conditions
- D. Material of construction
Answer: A
NEW QUESTION # 54
Risk presented in quantitative risk analysis as a
- A. Form of risk matrix
- B. Precise numeric value
- C. Form of event tree and fault tree
Answer: B
NEW QUESTION # 55
Qualitative consequence analysis of failure can be estimated separately for each unit, system, equipment group or individual equipment item.
- A. On the basis of available data
- B. No basis required since it is qualitative
- C. On the basis of process and environmental conditions
- D. On the basis of expert knowledge and experience
Answer: D
NEW QUESTION # 56
Results from quantitative analysis logic models are validated by
- A. Inspection engineer
- B. Expert judgment
- C. Operations personnel
- D. Maintenance engineer
Answer: B
NEW QUESTION # 57
No deterioration found in the inspection program but still failure can occur under the following conditions.
- A. All the above
- B. As a result of change or process upset condition
- C. During plant construction period
Answer: B
NEW QUESTION # 58
____________ uses logic models depicting combinations of events
- A. Qualitative risk analysis
- B. Quantitative risk analysis
- C. Process hazard analysis
Answer: B
NEW QUESTION # 59
The suitability and current condition of the equipment within the current operating envelope will determine the
______________ of the equipment from one or more deterioration mechanisms.
- A. Probability of failure (pot)
- B. Total risk
- C. Consequence of failure
- D. Relative risk
Answer: A
NEW QUESTION # 60
The programme that focused on maintaining the mechanical integrity of pressure equipment items and minimizing the risk of loss of containment due to deterioration
- A. PHA
- B. Hazop
- C. Rem
- D. RBI
Answer: D
NEW QUESTION # 61
______________to be established to judge acceptability of risk couldhe an objective of the rbi assessment if such criteria do not exist already within the user's company.
- A. Risk analysis
- B. Risk criteria
- C. Risk plan
Answer: B
NEW QUESTION # 62
CORRECT TEXT
Rp 580 significantly targeted at the application of rbi in the.................and
.............industry
Answer:
Explanation:
Hydrocarbon
and chemical process
NEW QUESTION # 63
The RBI program for environmental consequences, typically focuses
- A. On acute and immediate environmental risks, rather than chronic risks from low-level emissions
- B. On acute and immediate chronic risks than immediate environmental risks
- C. Non threat environmental risks
Answer: A
NEW QUESTION # 64
Following are some of the recognized risks which cannot be managed by inspection alone except one
- A. The suitability and current condition of the equipment within the current operating envelope will determine the probability of failure (pof) of the equipment from one or more deterioration mechanisms
- B. Failure mechanisms (such as brittle fracture, fatigue) where avoidance of failure primarily depends on operating within a defined pressure/temperature envelope
- C. Equipment nearing retirement
- D. Consequence-dominated risks
Answer: A
NEW QUESTION # 65
Failure mode can primarily affects the
- A. Consequences
- B. A&B
- C. Magnitude
Answer: C
NEW QUESTION # 66
Rbi is focused on a systematic determination of
- A. Comparable risks
- B. Total risks
- C. Absolute risks
- D. Relative risks
Answer: D
NEW QUESTION # 67
Outcome of an event
- A. Risk
- B. Consequence
- C. Event
Answer: B
NEW QUESTION # 68
Is a risk management activity that may lead to risk reduction?
- A. Evaluation
- B. Analysis
- C. Inspection
Answer: C
NEW QUESTION # 69
____________deals with total risk than with risk involve only with the equipment.
- A. FTA
- B. PHA
- C. RBI
- D. QRA
Answer: D
NEW QUESTION # 70
Other functional failures are usually covered within
- A. Hazop
- B. Rbi
- C. Rcm
- D. Pha
Answer: C
NEW QUESTION # 71
The following are the risks identified by rbi assessment that may be managed by actions other than inspection. Except one
- A. Chemical treatment of the process to reduce deterioration rates/susceptibilities
- B. Identifying and detecting deterioration and predicting future deterioration states with advanced inspection technique(s)
- C. Modification of the process to eliminate conditions driving the risk
- D. Modification of operating procedures to avoid situations driving the risk
Answer: B
NEW QUESTION # 72
Following are the non-inspection mitigation actions except one
- A. Maintenance of strict controls on operating conditions
- B. Replacement or upgrade
- C. Risk management by monitoring the deterioration
- D. Equipment redesign
Answer: C
NEW QUESTION # 73
A process to assess risks, to determine if risk reduction is required and to develop a plan to maintain risks at an acceptable level
- A. Risk management
- B. Risk control
- C. Risk mitigation
Answer: A
NEW QUESTION # 74
Maintenance impact will generally be measured in monetary term and typically includes:
- A. Safety systems
- B. Method of cleanup
- C. Repairs and equipment replacement
Answer: C
NEW QUESTION # 75
For a typical inspection program, if excessive inspection is applied then,
- A. Level of risk remain the same
- B. Level of risk may go up
- C. Level of risk may go down
Answer: B
NEW QUESTION # 76
When in accurate or insufficient failure data exists on the specific equipment item for quantative probability of failure analysis then
- A. General industry, company or manufacturer failure data used
- B. Process and toxic concentration analysis may be used
- C. Process hazard analysis failure data may be used
Answer: A
NEW QUESTION # 77
......
For more info visit:
API-580 Exam Dumps - PDF Questions and Testing Engine: https://www.actualtests4sure.com/API-580-test-questions.html
Latest API-580 Exam Dumps for Pass Guaranteed: https://drive.google.com/open?id=1gAhrOSwIGXMUzAdcu3Xy3uXsT22L45FC
