[May 17, 2024] 300-810 Ultimate Study Guide - Actualtests4sure
Ultimate Guide to Prepare 300-810 Certification Exam for CCNP Collaboration in 2024
NEW QUESTION # 11 
Refer to the exhibit. An engineer must configure Cisco IM and Presence server high availability so that the publisher node fails over to the subscriber node if the publisher node becomes unavailable On the Presence Redundancy Group Configuration page the engineer receives this message 'High availability is not enabled for this cluster " Which two actions must the engineer perform to resolve the issue? (Choose two.)
- A. Replace iMPPub with IMPSub m the redundancy group.
- B. Click Save and restart the Cisco Presence Engine.
- C. Select Enable High Availability and dick Save.
- D. Add a new presence redundancy group and click Save
- E. Add IMPSub as a secondary presence server in the redundancy group
Answer: C,E
NEW QUESTION # 12
Refer to the exhibit.
Which statement is true?
- A. Each Cisco IM&P subcluster must have the same number of nodes.
- B. IM&P nodes in each subscluster must be configured from the same OVA template.
- C. The administrator must add one node to each subcluster for high availability.
- D. If the IM&P node in sub-cluster-1 goes down, then users assigned to it are randomly split between the two remaining subclusters.
Answer: C
NEW QUESTION # 13
Which service must be activated on Cisco Unity Connection to utilize LDAP synchronization?
- A. Cisco Sync Agent
- B. Cisco RIS Data Collector
- C. Cisco Tomcat
- D. Cisco DirSync
Answer: D
NEW QUESTION # 14
Refer to the exhibit.
Refer to the exhibit. A collaboration engineer restored a failed primary node of an active/standby IM and presence subcluster. The engineer notices that users fallback to the node occurred. Which action resolves this issue?
- A. Set the Keep-Alive (Heartbeat) interval to 15.
- B. Modify the Client Re-Login Limits
- C. Wait for the primary node to establish 30 minutes of uptime
- D. Reboot the primary node
Answer: C
NEW QUESTION # 15
An engineer is working on a cisco unity Express system and notices that users that exist on the integrated cisco UCME are missing from Cisco Unity Express. Which two actions using the GUI resolve this discrepancy?
(Choose two)
- A. Add the missing users manually to Cisco Unity Express
- B. Use the Synchronize Information under Administration
- C. Use the Synchronize task under the User ID field.
- D. Use the Synchronize System under MWI
- E. Import the users using a CSV file.
Answer: A,D
NEW QUESTION # 16
An engineer must configure open SIP Federation on cisco IM and presence using cisco Expressways with the additional requirement not to allow a specific list if domains and allow all other domains that are not specified. How is this additional requirement met?
- A. Configure default static routes for each blocked domain with an invalid next-hop IP address.
- B. Add each allowed domain as a SIP Federated domain.
- C. Add a static route for each blocked domain and keep the "Block Route" checkbox checked.
- D. Block the specified SIP domains on the Expressway
Answer: D
NEW QUESTION # 17
Which two child elements can be in an XMPP message stanza? (Choose two.)
- A. <body/>
- B. <error/>
- C. <client/>
- D. <subject/>
- E. <server/>
Answer: A,D
Explanation:
Explanation
As described under extended namespaces, a message stanza MAY contain any properly-namespaced child element.
In accordance with the default namespace declaration, by default a message stanza is qualified by the
'jabber:client' or 'jabber:server' namespace, which defines certain allowable children of message stanzas. If the message stanza is of type "error", it MUST include an <error/> child; for details, see [XMPPCORE].
Otherwise, the message stanza MAY contain any of the following child elements without an explicit namespace declaration:
<subject/>
<body/>
<thread/>
NEW QUESTION # 18
A collaboration engineer troubleshoots an Issue with Cisco IM and Presence federated with Microsoft Skype for Business. A Cisco Jabber user reports being unable to see the presence status of a user on Microsoft Skype for Business when searching for the Microsoft user. Which action resolves this issue?
- A. Add a static route on Cisco IM and Presence to the Skype for Business domain.
- B. Disable TLS for the federation.
- C. Have the Jabber user add the Skype for Business user to the Jabber contact list.
- D. Configure the federation to use the XMPP protocol.
Answer: A
NEW QUESTION # 19
To redirect calls from the phone extension for user A to the voicemail greeting, which call routing rule should be used in Cisco Unity Connection?
- A. Attempt Sign-In direct routing rule
- B. Opening Greeting direct routing rule
- C. Attempt Forward forwarded routing rule
- D. Opening Greeting forwarded routing rule
Answer: C
Explanation:
Explanation/Reference: https://community.cisco.com/t5/collaboration-voice-and-video/unity-connection-call-routing-logic/ta- p/3162560
NEW QUESTION # 20
What is a step in the SAML SSO process?
- A. The IdP redirects the SAML response to the browser.
- B. The service provider issues an authentication challenge to the browser.
- C. The LDAP server extracts the assertion.
- D. The browser issues an HTTPS POST request to the IdP.
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/SAML_SSO_deployment_guide/12_5_1/cucm_b_saml-sso-deployment-guide-12_5/cucm_b_saml-sso-deployment-guide-12_5_chapter_01.html
NEW QUESTION # 21
Refer to the exhibit.
Troubleshooting an internal Jabber login issue and you see this logging snippet from the Jabber PRT file. You already checked that the Jabber client has a connection to the correct DNS server. Which DNS record is missing for service discovery of Cisco Unified Communications Manager for the login process to proceed further?
- A. A record _cuplogin._tcp.example.com
- B. SRV record _cisco-uds._tcp.example.com
- C. A record for the Cisco Unified Communications Manager
- D. SRV record _cuplogin._tcp.example.com
Answer: B
NEW QUESTION # 22
Which two methods does Cisco Jabber use for contact searching in an on-premises deployment model? (Choose two.)
- A. LDAP
- B. HTTP
- C. UDS
- D. XMPP
- E. SIP
Answer: A,C
NEW QUESTION # 23
SAML SSO is enabled in Cisco Unified Communications Manager. What happens when a browser-based client attempts to access a protected resource on a service provider?
- A. The service provider generates a SAML authentication request.
- B. The IdP checks for a valid browser session.
- C. The browser follows the redirect and issues an HTTPS GET request to the IdP.
- D. The SAML request is maintained as a query parameter in the GET request.
Answer: A
NEW QUESTION # 24
After integrating Cisco Unity Express with Cisco Unified Communications Manager Express, users report that the system does not respond to key presses. Which two configuration snippets resolve this issue? (Choose two.)
- A. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g711ulaw - B. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay rtp-nte
codec g711ulaw - C. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g729r8 - D. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g729r8 - E. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g711ulaw
Answer: B,E
NEW QUESTION # 25
Refer to the exhibit.
Which protocol is used for communication between Cisco IM and Presence and Microsoft Exchange Server?
- A. IMAP
- B. POP3
- C. EWS
- D. XMPP
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/presence.html
NEW QUESTION # 26
An engineer Is troubleshooting an MWI Issue between Unity Express and CallManager Express. In the debug SIP logs, the engineer can see CallManager Express responding to Unity Express with a 488 Not Acceptable Media message. Which action resolves the issue?
- A. Ensure that codec G.729 is configured In the dial peer.
- B. Ensure that codec G.722 Is configured In the dial peer.
- C. Ensure that codec G.711alaw is configured In the dial peer.
- D. Ensure that codec G.711ulaw is configured in the dial peer.
Answer: D
NEW QUESTION # 27
Refer to the exhibit Users complain that the message waiting light on the IP phone does not light up when receiving a new voicemail With which codec must the engineer configure a dial peer on Cisco UCME for MW1 traffic to resolve this issue?
- A. G.711alaw
- B. G.729ar8
- C. G.729r8
- D. G.711ulaw
Answer: D
NEW QUESTION # 28
Which two child elements can be in an XMPP message stanza? (Choose two.)
- A. <body/>
- B. <error/>
- C. <client/>
- D. <subject/>
- E. <server/>
Answer: A,D
NEW QUESTION # 29
......
CCNP Collaboration Fundamentals-300-810 Exam-Practice-Dumps: https://www.actualtests4sure.com/300-810-test-questions.html
Use Real 300-810 Dumps - Cisco Correct Answers: https://drive.google.com/open?id=1i1LUgDkNXke2LbSOuBarWTQO-C8E37dt
