5V0-42.21 Actual Questions 100% Same Braindumps with Actual Exam!
5V0-42.21 Study Material, Preparation Guide and PDF Download
VMware 5V0-42.21 exam covers a range of topics related to SD-WAN design and deployment, including network architecture, deployment models, configuration, and troubleshooting. 5V0-42.21 exam is designed to test the candidate's knowledge of SD-WAN technologies and their ability to design and deploy SD-WAN solutions that meet the needs of their organization. 5V0-42.21 exam consists of 60 multiple-choice questions that need to be answered in 105 minutes.
NEW QUESTION # 16
Which form factor can a customer use to deploy VMware SD WAN Edge?
- A. Docker Container
- B. Open Virtualization Appliance
- C. Hyper-V Virtual Machine
- D. Oracle Virtual Box
Answer: B
NEW QUESTION # 17
A customer is using hypervisor to install VMware Partner Gateways.
Which two hypervisors may be used? (Choose two.)
- A. XenServer
- B. KVM
- C. Hyper-V
- D. Kubermetes
- E. ESXi
Answer: B,C
NEW QUESTION # 18
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA
- A. Cloud VPN
- B. SD-WAN Service Reachable on the private overlay
- C. Split Brain Detection
- D. VRRP
Answer: B
NEW QUESTION # 19
A customer is migrating a branch site with a VMware SD-WAN Edge coexisting with the CE. The Edge will be connected to internet link directly while connecting to the CE via a Layer 3 LAN switch.
MPLS underlay is the preferred path for communication from this site to branch sites that have no VMware SD-WAN Edges. Communication from this site to branch sites that have VMware SD-WAN Edges should go through overlay.
- A. Use BGP as the rout.ng protocol on UK Edge and flag its BGP neighbor to the Layer 3 LAN switch as Uplink.
- B. Use BGP as the routing protocol on the Edge and flag its HGP neighbor to PE as Uplink.
- C. Use BGP as the routing protocol on the Edge and filter prefixes from CE using Uplink Community
- D. Use BGP as the routine, protocol on the Edge and flag its BGP neighbor to GE as Uplink.
Answer: B
NEW QUESTION # 20
Which port is used for the high availability connection between the two Edges on a pair of Edge 510s?
- A. Any port may be chosen.
- B. SFP1
- C. GE4
- D. GE1
Answer: B
NEW QUESTION # 21
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0 0.0/0 to the Edge.
- B. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- C. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- D. The service provider administrator decides whether the Partner Gateway advertises a default route 0.0.0.0/0 or not, although it is advertised by default.
Answer: B
NEW QUESTION # 22
What Is a typical use case for the deployment of a VMware SU-WAN Partner Gateway?
- A. Get improved flow analytics for all traffic in the SD-WAN network
- B. Interconnect branches/remote sites of a single enterprise customer to the internet
- C. Provide connectivity between multiple enterprise customers over private circuits
- D. Provide mite transport m a service provider backbone tor interconnecting a global customer SD-WAN branches.
Answer: D
NEW QUESTION # 23
A VMware SD-WAN customer has a requirement to enable single sign-on (SSO) authentication to their existing provider (idp) for access to their Orchestrator account.
Which authentication protocol is supported?
- A. LDAP
- B. OpenID Connect (OlDC)
- C. SAML 2.0
- D. TACACS+
Answer: C
NEW QUESTION # 24
A customer has a hybrid VMware SD-WAN deployment and wants to use the SD-WAN Service Reachable feature on the private WAN.
What is the main dependency that must be met for the feature to work?
- A. Gateway IPs must be routed in the overlay
- B. Internet reachability via the private WAN
- C. Static mute for gateway IPs on the edge
- D. Default route learned via dynamic routing
Answer: D
NEW QUESTION # 25
Which three authentication mode options ate valid for use on the VMware SD-WAN Edge? (Choose three.)
- A. Certificate Disabled
- B. Certificate Accepted
- C. Certificate Enabled
- D. Certificate Requited
- E. Certificate ate Optional
- F. Certificate Activated
Answer: A,B,C
NEW QUESTION # 26
An Enterprise customer just acquired a new company, and the Network Enterprise administrator was tasked to integrate over 20 new branches into their existing SD-WAN network. However, these branches have overlapping IPs with the existing branches subnets.
- A. Configure a policy based NAT tor each branch translating its subnets Into a new non-overlappingsubnet
- B. Configure a NAT hand off rule at the VMware SD WAN gateway assigned to these new blanches, translating the new branch subnets into a new nan-overlappingsubnet
- C. Configure a NAT firewall rule in each branch, translating itssubnets into a new non-overlapping subnet
- D. Configure a LAN-side NAT rule at the branchdevice settings, translating its subnets into a new non-overlapping subnet
Answer: D
NEW QUESTION # 27
Refer to the exhibit.
Which VMware SD-WAN Edge High Availability deployment is being used"?
- A. Standard HA
- B. Enhanced HA
- C. VRRP HA
- D. Fault Domain HA
Answer: C
NEW QUESTION # 28
A customer is using VMware vSphere in their data center. An administrator is asked to deploy SD-WAN Edges for a Proof of Concept as soon as possible.
Which deployment option is the roost cost and time effective?
- A. Purchase bare metal Edge
- B. Deploy a virtual appliance on ESXi
- C. Deploy a virtual appliance on KVM
- D. Deploy a virtual appliance in AWS
Answer: C
NEW QUESTION # 29
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?
- A. Firewall
- B. Business Policy
- C. VLANs
- D. Segments
Answer: D
Explanation:
https://kb.vmware.com/s/article/77153
NEW QUESTION # 30
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?
- A. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)
- B. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)
- C. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)
- D. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)
Answer: C
NEW QUESTION # 31
Which characteristic of Software Defined Networks (SDN) is also true for VMware SD-WAN
- A. VMware SU-WAN allows customers to program the forwarding plane
- B. VMware SD-WAN requires specialized hardware to run its software
- C. VMware SD -WAN provides distributed management and control plane
- D. VMware SD-WAN provides separation of management control plane, and the data plane.
Answer: B
NEW QUESTION # 32
Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering?
- A. One VCE cluster can be formed with both virtual and hardware at the same lime
- B. VCE cluster members should have unique IP addresses on its WAN interfaces
- C. VCF clusters member sync flow tables between themselves.
- D. A VCE cluster requires one dedicated interface for HA sync
Answer: C
NEW QUESTION # 33
A customer has deployed VMware SD_WAN solution An administrator asked to imported additional security for traffic going to internet without investigating in new hardware solutions.
- A. Service chaining with DFW in NSX-1
- B. Service chaining with Zscaler Cloud Security Service
- C. Service chaining with DFW in NSX-V
- D. Service chaining with AWS Cloud Security
Answer: D
NEW QUESTION # 34
Which VMware SR-WAN component runs the Deep Application Recognition Engine?
- A. VMware SD-WAN Controller
- B. VMware SD-WAN Edge
- C. VMware SD WAN Orchestrator
- D. VMware SD-WAN Gateway
Answer: A
NEW QUESTION # 35
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 2 segments
- B. 6 segments
- C. 4 segments
- D. 5 segments
Answer: D
NEW QUESTION # 36
A customer is looking to have Quality of Service (QoS), resource allocations, link/path steering, and error correction applied automatically based on applications.
Which component of VMware SD-WAN helps the customer achieve this requirement?
- A. Branch Site Topologies
- B. High Availability Configuration
- C. Overlay Flow Control
- D. Business Policy Framework
Answer: D
NEW QUESTION # 37
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?
- A. UDP 500
- B. UDF 2426
- C. TCP 443
- D. TCP 80
Answer: D
NEW QUESTION # 38
......
5V0-42.21 Certification Study Guide Pass 5V0-42.21 Fast: https://www.actualtests4sure.com/5V0-42.21-test-questions.html
Free 5V0-42.21 Certification Sample Questions with Online Practice Test: https://drive.google.com/open?id=16YgeRH1lxSkEUmxw7aC3YzKATop1j71e
