JN0-682 Practice Test Give You First Time Success with 100% Money Back Guarantee!
All Obstacles During JN0-682 Exam Preparation with JN0-682 Real Test Questions
The JN0-682 exam is ideal for network professionals who are looking to gain expertise in data center technologies. Data Center, Professional (JNCIP-DC) certification is especially beneficial for those who are responsible for designing, implementing, and managing data center networks. Data Center, Professional (JNCIP-DC) certification validates the candidate's knowledge and skills in data center technologies and helps them stand out in the job market.
Juniper JN0-682 exam is an advanced-level certification exam that requires candidates to have a deep understanding of data center technologies and protocols. JN0-682 exam is intended for professionals who work in data center environments and have experience with Juniper Networks technologies. JN0-682 exam covers a broad range of topics, including data center design, implementation, and support.
NEW QUESTION # 43
Referring to the exhibit, which statement is correct?
- A. The exhibit shows a 5-stage IP fabric architecture.
- B. The exhibit shows a collapsed fabric architecture.
- C. The exhibit shows a 3-stage IP fabric architecture.
- D. The exhibit does not represent a valid fabric architecture.
Answer: A
NEW QUESTION # 44
You are asked to implement a monitoring and telemetry solution for the QFX Series devices in your IP fabric that uses a push model to collect both system event data and statistical data for your QFX Series devices.
Which technology satisfies your requirements?
- A. Junos Telemetry Interface
- B. JunosXMLAPI
- C. REST API
- D. SNMP
Answer: B
NEW QUESTION # 45
Referring to the exhibit,
what happens when you initiate ZTP on a QFX5120 switch running Junos
21.3R1.9?
- A. ZTP skips the Junos installation but applies the configuration.
- B. ZTP performs the Junos installation but skips the configuration.
- C. ZTP performs both the Junos installation and the configuration.
- D. ZTP skips both the Junos installation and the configuration.
Answer: A
NEW QUESTION # 46
You are configuring an MX Series router to act as a Layer 3 gateway to route traffic between VXLANs in different data centers across a WAN connection. In this scenario, what must you do to enable this communication?
- A. Change the UDP port used by the VXLANs.
- B. Configure the IRB interfaces to connect the VXLANs.
- C. Enable PIM on all interfaces.
- D. Configure route reflectors.
Answer: B
NEW QUESTION # 47
What are three functions supported by the Contrail Command user interface?
- A. Onboarding of an IP fabric
- B. Enabling VM-to-BMS bridging
- C. Configuring management domains
- D. Integrated syslog collector
- E. Creating virtual network
Answer: C,D,E
Explanation:
The Contrail Command user interface supports various functions including configuring management domains and creating virtual networks. It provides an integrated platform for managing and configuring network resources in a centralized manner.
Reference:
Juniper Networks - Contrail Networking Documentation
NEW QUESTION # 48
Host1 and host2 are connected to an EVPN signaled VXLAN overlay, and must have Layer 3 connectivity. The VNI and VLAN assignments are shown in the exhibit.
In this scenario, which two statements are true? (Choose two.)
- A. A Layer 3 gateway can be configured on the leaf devices.
- B. The VNI assigned to the host1 link must be same as the VNI assigned to the host2 link.
- C. A layer 3 gateway can be configured on the spine devices.
- D. The ESI assigned to the host1 link will be different from the ESI assigned to the host link.
Answer: A,C
NEW QUESTION # 49
You work in a data center where VMs and hosts are frequently moved. Your design needs to eliminate
inefficient traffic flows.
In this scenario, which two solutions will satisfy this requirement? (Choose two.)
- A. EVPN
- B. VMTO
- C. VXLAN
- D. VPLS
Answer: A,B
Explanation:
Explanation
https://www.juniper.net/documentation/en_US/junos/topics/concept/evpn-ingress-vmto.html
NEW QUESTION # 50
A VXLAN has been created between devices leaf1 and Ieaf3.
Referring to the exhibit, which statement is true?
- A. Traffic sent from host1 to host2 will be dropped on Ieaf3.
- B. Traffic sent from host1 to host2 will be tagged with VLAN ID 100 when exiting Ieaf3.
- C. Traffic sent from host1 to host2 will be dropped on leaf1.
- D. Traffic sent from host1 to host2 will be tagged with VLAN ID 200 when exiting Ieaf3.
Answer: B
NEW QUESTION # 51
You want to configure redundant Layer 3 gateways
In this scenario, which two juniper best practices would accomplish this task? (Choose two.)
- A. Allowing Junos to dynamically create the virtual MAC address of the IRB interface
- B. Allowing Junos to dynamically create the virtual IP address of the IRB interface
- C. Configuring both IRB interfaces manually with the same address
- D. Configuring both IRB interfaces manually with the same IP address
Answer: A,C
Explanation:
A) Allowing Junos to dynamically create the virtual MAC address of the IRB interface ensures unique MAC addresses for redundancy and avoids conflicts. C. Configuring both IRB interfaces manually with the same address ensures consistency and helps in creating a redundant Layer 3 gateway setup.
NEW QUESTION # 52
You choose the EBGP design shown in the exhibit as your IP fabric design. You must ensure that both routes received by the spine nodes will be used for ECMP forwarding.
Which BGP parameter would need to be added to the EBGP configuration of the spine nodes to achieve this goal?
- A. multipath
- B. add-path
- C. multipath multiple-as
- D. multihop
Answer: C
NEW QUESTION # 53
Exhibit.
Referring to the exhibit, you have a data center with two PODs. Seamless EVPN-VXLAN stitching is used to facilitate communication between the PODs.
Which three statements are true in this scenario? (Choose three.)
- A. AVXLAN tunnel can form between L2 and S1.
- B. A VXLAN tunnel can form between S1 and S2.
- C. AVXLAN tunnel can form between L1 and L2.
- D. AVXLAN tunnel can form between L2 and S3.
- E. AVXLAN tunnel can form between L1 and L4.
Answer: A,B,D
NEW QUESTION # 54
Referring to the exhibit, DC1 and DC2 have a DCI across a service provider WAN connection.
Host1 in DC1 must have Layer 2 connectivity to host2 in DC2. A VXLAN tunnel must be created between VTEP1 and VTEP2.
In this scenario, which statement is true?
- A. VXLAN Layer 3 gateway must be provisioned at the Super Spine layer.
- B. A route to the loopback address on VTEP must be present on VTEP1.
- C. The service provider WAN connection be an MPL5-based WAN connection.
- D. VTEP and VTEP2 must peer using IBGP.
Answer: B
NEW QUESTION # 55
You want to monitor the value of a MIB object or variable against configured thresholds and generate a corresponding event when the value of a variable crosses a threshold.
In this scenario, which feature should you use to accomplish this task?
- A. Event Policy
- B. RMON
- C. Event Script
- D. generate-event
Answer: B
NEW QUESTION # 56
Which two statements are true Virtual Chassis? (Choose two.)
- A. The request virtual-chassis mode fabric reboot command will set the Virtual Chassis to fabric mode with similar devices
- B. The request virtual-chassis mode fabric reboot command will set the Virtual Chassis to mixed mode.
- C. By default, Junos switches are in a mixes mode Virtual Chassis
- D. By default, Junos switches are in non-mixed mode virtual chassis.
Answer: A,D
Explanation:
A) By default, Junos switches operate in non-mixed mode Virtual Chassis, meaning they are configured to operate with similar or identical device models.
B) The command request virtual-chassis mode fabric reboot is used to set the Virtual Chassis to fabric mode with similar devices. This mode is specifically designed for configurations that involve similar devices to optimize performance and capabilities.
NEW QUESTION # 57
Referring to the exhibit, you want to advertise the IRB routes between both routing instances.
Which two configuration parameters would be applied to accomplish this task? (Choose two.)
- A. Apply policy irb-A under instance Tenant A and apply policy irb-c under instance Tenant_c as export policies.
- B. Configure vrf-table-label under both routing instances.
- C. Apply policy irb-A under instance Tenant_c and apply policy irb-c under instance Tenant_A as import policies.
- D. Configure auto-export under both routing instances.
Answer: B,C
NEW QUESTION # 58
Which two statements are correct about VXLANs? (Choose two.)
- A. VXLANs are an overlay technology.
- B. VXLANs have a smaller logical network identifier than VLANs.
- C. VXLANs have smaller broadcast domains than VLANs.
- D. VXLANs can have a theoretical maximum of 16 million unique networks.
Answer: B
NEW QUESTION # 59
Exhibit.
Referring to the exhibit, you must advertise the Io0.12 interface as a type-5 route.
Which configuration parameter would be used to accomplish this task?
- A. Configure an export policy to advertise the interface route under protocols evpn.
- B. Configure a vrf-export policy to advertise the interface route under the routing instance.
- C. Configure vrf-table-label under the routing instance.
- D. Configure auto-export under the routing instance.
Answer: A
NEW QUESTION # 60
Click the exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Switch01 is a leaf device.
- B. An OTT data center interconnect is in use.
- C. Switch01 is a spine device.
- D. Seamless EVPN VXLAN stitching is in use.
Answer: A,B
NEW QUESTION # 61
You are implementing perimeter security for your data center. You need to inspect all traffic Layer 7 and
ensure the failure of a port or device will not result in an interruption to traffic flows.
In this scenario, which design would satisfy these requirements?
- A. SRX using LAG
- B. MX with MC LAG
- C. SRX Chassis cluster
- D. QFX Virtual Chassis
Answer: C
NEW QUESTION # 62
After configuring an IP fabric using EBGP as you protocol, you notice that not all of the routers are showing up in the routing tables. You have verified that all adjacencies have formed, and place and configured properly.
In this scenario, which statement is true?
- A. The routers have not been configured with the multipath multiple-as parameter.
- B. The routers have not been configured using the add-path parameter
- C. The routers have not been configured using the multihop parameter.
- D. The routers have not been configured using the bfd-1 Liveness-detection parameter.
Answer: A
NEW QUESTION # 63
Referring to the exhibit,
you have a data center in which only the spine devices are using EVPN and VXLAN. The leaf nodes are multihomed in active-active mode to the spine nodes through ESI LAG interfaces. In this design, a link failure on the interface connecting the spine nodes would also cause all traffic from the spine to the leaf nodes to drop.
In this scenario, which command configured on which nodes would solve this problem?
- A. the set protocols evpn no-core-isolation command on the leaf nodes
- B. the set protocols evpn no-core-isolation command on the spine nodes
- C. the disable protocols evpn no-core-isolation command on the spine nodes
- D. the disable protocols evpn no-core-isolation command on the leaf nodes
Answer: C
NEW QUESTION # 64
Exhibit.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. There are two tunnels to the remote endpoint.
- B. The irb. 0 interface is the remote tunnel endpoint interface.
- C. The source tunnel IP address is 192.168.100.11.
- D. There is one tunnel to the remote endpoint.
Answer: C,D
NEW QUESTION # 65
Referring to the exhibit, you must advertise the Io0.12 interface as a type-5 route.
Which configuration parameter would be used to accomplish this task?
- A. Configure an export policy to advertise the interface route under protocols evpn.
- B. Configure a vrf-export policy to advertise the interface route under the routing instance.
- C. Configure vrf-table-label under the routing instance.
- D. Configure auto-export under the routing instance.
Answer: A
NEW QUESTION # 66
Referring to the exhibit, not all routes are being exchanged by EBGP peers.
In this scenario, which BGP parameter would solve this problem?
- A. mulcipach
- B. mulcipach mulciple-as
- C. mulcihop
- D. as-override
Answer: D
NEW QUESTION # 67
You are attempting to configure filter-based forwarding in your data center. All traffic from Host1 that is going to Host2 should be inspected by the data center firewall. You have verified that the traffic is being forwarded from router leaf L1's VRF-1 to its INSPECT-VRF. However, the traffic is not reaching service L2.
Referring to the exhibit, which two steps should you take to troubleshoot the problem? (choose two.)
- A. Ensure that VRF-1 and INSPECT-VRF route targets on L1 and L2 match.
- B. Ensure that the route target in the INSPECT-VRF of L1 matches the route target of the INSPECT- VRF of L2.
- C. Examine the INSPECT-VRF.inet. 0 route table on L1 for a default route that will direct the traffic to L2.
- D. Examine the INSPECT-VRF.evpn 0 route table on L1 for a default route that will direct the traffic to L2.
Answer: B,C
NEW QUESTION # 68
......
Fully Updated Free Actual Juniper JN0-682 Exam Questions: https://www.actualtests4sure.com/JN0-682-test-questions.html
Free JN0-682 Questions for Juniper JN0-682 Exam [Apr-2024]: https://drive.google.com/open?id=1moZKu26mWYYTPE4LZ9FuIkHqKGgd9fu_
