The Best Valid NCM-MCI-5.20 Dumps for Helping Passing NCM-MCI-5.20 Exam!
UPDATED Nutanix NCM-MCI-5.20 Exam Questions & Answer
Nutanix NCM-MCI-5.20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 85
Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the cluster?
- A. allssh show_uplinks
- B. allssh manage_ovs show_uplinks
- C. manage_ovs show_uplinks
- D. manage ovs show uplinks
Answer: B
NEW QUESTION 86
Refer to the exhibit.
User 1 and User 2 belong to the AAPM group
What are two descriptions of how Files perform quota management? (Choose two.)
- A. User 1 can add an 8GB file to the share without receiving notification.
- B. User 2 can add an 8GB file without receiving a notification email.
- C. User 2 can continue to add another 3GB file but will receive a daily notification email.
- D. User 1 can continue to add another 5GB file but will receive a daily notification email.
Answer: B,D
NEW QUESTION 87
An administrator configures authentication in Prism Central (PC) for the NTNX-Admins group. Users report that they are unable to log in. The administrator confirms that the Active Directory (AD) settings in PC are correct.
Which condition could result in this behavior?
- A. A role mapping needs to be associated with the AD group.
- B. A client chap certificate must also be added in PC.
- C. The users must be added to the Domain Admins AD group.
- D. The Local authentication type must also be selected in PC.
Answer: C
NEW QUESTION 88
An organization subscribes to field advisories from the Nutanix support portal. An administrator receives an email about a rare problem that could cause cluster instability and affect the entire AOS cluster. The organization is running Vmware vsphere 6.x on Nutanix.
What action should be taken to resolve this issue?
- A. File a ticket to Nutanix Support and provide the Field Advisory ID.
- B. In Prism Central, select Life Cycle Management and perform LCM update.
- C. Open Prism Element and select Upgrade Software to update AOS.
- D. Use VMware Update Manager to update the cluster.
Answer: B
NEW QUESTION 89
An administrator has Created a new windows VM and Given it to the user. The user states that only C drive mapping is visible within the windows OS.
What is causing this issue?
- A. The additional disk have not been formatted as ExFAT in Prism Central
- B. The user has not formatted and assigned drive letters to the additional disk.
- C. the additional disk were formatted as NTFS in Prism Central
- D. the administrator has not run the add command line utility
Answer: B
NEW QUESTION 90
An administrator is currently using both 10g uplink with LACP and balance-tcp. A single VM should not be allowed to use more than a single 10G uplink, and both uplinks should be utilized.
Which two command should be used to configure the bond? (choose two)
- A. Ovs-vsctl set port br0-up other_config: bond-rebalance-interval=30000
- B. Ovs-vsctl set port br0-up bond_mode=active-backup
- C. Ovs-vsctl set port br0-up bond_mode=balance-slb
- D. Ovs-vsctl set port br0-up bond_mode=balance-tcp
Answer: A,C
NEW QUESTION 91
An administrator wants to utilize Network Visualization to monitor the physical and logical network on the Nutanix cluster. The first-hop switch has LLDP enabled. The network switch information is still not being displayed.
What is causing this problem?
- A. The cluster is using RDMA-enabled NICs.
- B. SNMP is not configured properly.
- C. br0 and br1 are not defined.
- D. The ISL between switches is not configured.
Answer: B
NEW QUESTION 92
An administrator needs to make sure an RF2 cluster can survive a complete rack failure without negatively effecting workload performance. The current cluster configuration consists of the following:
* 30 nodes: distributed 10 nodes per rack across three 42U rack
* Each nodes is configured with 40TB usable storage all flash (Cluster Total 1.2 PB Usable)
* Current cluster utilization is 900TB storage
Which configuration changes should be made to make sure that the cluster meets the requirements?
- A. Expanse the cluster by adding 2 additional nodes per rack, 6 nodes total.
- B. Expanse the cluster by adding 8 nodes to a new 42U rack
- C. Expanse the cluster by adding 3 additional nodes per rack, 9 nodes total.
- D. Expanse the cluster by adding 9 nodes to a new 42U rack
Answer: C
NEW QUESTION 93
An administrator has a custom backup application that requires a 2TB disk and runs in Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* Four vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?
- A. Increase the number of cores per vCPU
- B. Span the 2TB disk across four vDisks
- C. Add 4GB of memory to the VM
- D. Increase the vCPUs assigned to the VM
Answer: B
NEW QUESTION 94
A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?
- A. Leap
- B. Metro Availability
- C. Asyn&DR
- D. NearSync
Answer: A
NEW QUESTION 95
An administrator needs to take a single node down for maintenance. Which two steps should the administrator take? (Choose two)
- A. Make sure Auto Evacuation is enabled
- B. Reclaim the licenses to the Nutanix Support Portal.
- C. Verify the data resiliency status of the cluster.
- D. Shut down or live migrate all VMs off of the node.
Answer: C,D
NEW QUESTION 96
An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare for this task? (Choose two.)
- A. Stop all Nutanix Files clusters
- B. Shut down all user VMs in the cluster
- C. Relocate the linked LDAP servers
- D. Reconfigure IPMI for the new datacenter
Answer: A,B
NEW QUESTION 97
How should an administrator view the storage consumed by the recycle bin?
- A. On the storage Overview dashboard
- B. In the Diagram or Table view on the Storage dashboard
- C. In the Cluster Details Page of the cluster setting
- D. On the storage Summary Widget on the Prism Dashboard
Answer: B
NEW QUESTION 98
A VM does not have enough resources for the demand, which leads to performance bottlenecks. The VM is exhibiting one or more of following baseline values, based on the past 30 days:
* CPU usage > 90% (moderate), 95% (high)
* CPU ready time > 5%, 10%
* Memory usage > 90%, 95%
* Memory swap rate > 0 Kbps (no moderate value)
Which type of VM is being described?
- A. Inactive VM
- B. Constrained VM
- C. Over-provisioned VM
- D. Bully VM
Answer: B
NEW QUESTION 99
An administrator is supporting a business critical environment and deploys metro availability to achieve a zero data loss configuration. The two clusters are connected by a 1GbE connection. A new workload is going to be deployed to this cluster. This workload requires a sustained 150MB/S of write throughput and 20MB/s of read throughput.
Which change must be made to deploy the workload successfully on this cluster?
- A. The bandwidth must be increased to support this workload.
- B. The replication frequency must be less than 60 minutes.
- C. The workload must be configured to read at greater than 12.5MB/S.
- D. Zero data loss nearsync must be used to support this workload.
Answer: A
Explanation:
Reference:
NEW QUESTION 100
Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic, regardless of direction, between two groups of VMs identified by their category.
Which policy should be used to meet this requirement?
- A. An Isolation Environment Policy
- B. A Quarantine Policy
- C. A Whitehst-Based Policy
- D. An Application Security Policy
Answer: A
Explanation:
NEW QUESTION 101
An administrator needs to migrate workloads from a Nutanix cluster running VMware ESXi to Nutanix AHV. The migration process needs to be completed in multiple VM groups and support roll back in case any problems are found during user acceptance testing.
Which action should the administrator perform?
- A. Use VMware Converter
- B. Use Nutanix one-click cluster conversion from ESXi to AHV
- C. Use storage live migration
- D. Use Cross Hypervisor DR to replicate VMs from ESXi to AHV
Answer: B
NEW QUESTION 102
......
Updated NCM-MCI-5.20 Dumps Questions For Nutanix Exam: https://www.actualtests4sure.com/NCM-MCI-5.20-test-questions.html
