Reliable ISTQB Foundation Level CTFL-AcT Dumps PDF Dec 24, 2021 Recently Updated Questions
Pass Your ISQI CTFL-AcT Exam with Correct 42 Questions and Answers
NEW QUESTION 17
Which one of the following test design techniques fits accepting testing purposes BEST?
- A. input validation
- B. static code analysis
- C. defect-based test design
- D. equivalence partitioning
Answer: D
NEW QUESTION 18
Which of the following techniques is most likely applied to ensure the quality of acceptance testing activities?
- A. Verification of the traceability between user stories and test cases to make sure it is up to date.
- B. Review of the source code to ensure traceability of user stories to system components.
- C. Eye tracking to verify the feasibility of previously defined user acceptance tests.
- D. Checklist-based verification of requirements to ensure their completeness and quality.
Answer: A
NEW QUESTION 19
Which one of the following statements regarding performance testing is MOST correct?
- A. The performance of the system is measured in a context that reflects, as far as possible, representative operating conditions.
- B. Performance testing aims to determine a system's robustness against malicious attacks.
- C. The performance test results serve to determine hardware and software performance requirements.
- D. Depending on the model used to simulate the workload, performance tests are called load, stress or endurance / stability tests.
Answer: A
NEW QUESTION 20
Suppose you are testing a new professional exam support system. As input the system takes two grades from two exams. For each exam the possible grade is 0 or 1 point. As output the system returns a single string - the decision about the entitlements: if the total score is 2, the candidate receives full entitlements. If the total score is 1, she receives partial entitlements. If the total score is 0, the candidate fails and receives no entitlements.
Which of the following is the correct Decision Model and Notation (DMN) model for this situation?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION 21
Which of the following is the BEST example of a Gherkin-style test for a web-based banking application?
- A. GIVEN I have $5000 on my personal account X WHEN I have $600 on my personal account Y THEN I have $5600 in total on my personal accounts X and Y
- B. GIVEN I have $5000 on my personal account X AND I have $200 on my personal account Y WHEN I transfer $1000 from X to Y THEN I should have balance $4000 on my personal account X AND I should have balance $1200 on my personal account Y
- C. GIVEN I have $5000 on my personal account X AND I have $200 on my personal account Y WHEN I click 'Make transfer' button AND I enter '3000' into 'Amount' field AND I enter 'X' into 'From which account' field AND I enter 'Y' into 'To which account' field AND I click 'Confirm transaction' button THEN I should have balance $2000 on my personal account X AND I should have balance $3200 on my personal account Y
- D. GIVEN I have $5000 on my personal account X and $600 on my personal account Y WHEN I transfer
$500 from Y to X
THEN I should have balance $4500 on X and balance $1100 on Y
Answer: B
NEW QUESTION 22
Which of the following statements corresponds BEST to a UX requirement analysis activity?
- A. Environmental conditions such as light conditions are obtained from a task analysis.
- B. Personas are used to analyze products or solutions from competitors.
- C. Security requirements are derived from usage scenarios.
- D. User profiles are used to determine different levels of business knowledge.
Answer: D
NEW QUESTION 23
Which one of the following statements regarding the graphical representation of business processes is true?
- A. Using decision tables in BPMN allows defining test conditions corresponding to the business rules under test.
- B. Business processes should be described graphically using the DMN standard and completed with decision tables.
- C. For acceptance testing, graphical business process models should focus on the user workflows to be tested.
- D. Graphical representations of business processes must describe the complete workflow in detail, including alternative and error scenarios.
Answer: C
NEW QUESTION 24
As an acceptance tester you want to test the $100 withdrawal process described by the following BPMN model.
You would like to achieve decision coverage. Consider the following test cases: Test 1: balance = $100, receipt = YES Test 2: balance = $99 Test 3: balance = $120, receipt = NO Test 4: balance = $2500, receipt = YES Which of the following is the minimal set of test cases allowing to achieve full decision coverage?
- A. Test 1, Test 2, Test 3
- B. Test 2, Test 3
- C. Test 1, Test 2, Test 4
- D. Test 1, Test 2
Answer: A
NEW QUESTION 25
As a tester you participate in the project of the decision support system for granting a loan. You are asked to review the acceptance criteria for the following requirement:
REQ 3.28. The automated system records critical credit application data (CCAD. needed to support application screening.
Assume that it is well known what kind of data CCAD are. Which of the following would be the BEST example of an acceptance criterion for this requirement?
- A. The CCAD record process is quick and reversible.
- B. The CCAD is not recorded if it is incomplete and a message is displayed.
- C. The process for collecting CCAD meets corporate usability guidelines.
- D. The CCAD are stored in the MySQL relational database after each successful data entry procedure.
Answer: B
NEW QUESTION 26
Which of the following statements regarding defects is MOST correct?
- A. The tester should analyze the potential impact of a defect on system usage, before communicating it to the business analyst.
- B. Testers should provide accurate information regarding the difference between the expected test result and the actual result.
- C. Regular meetings between business analysts and testers are necessary to report discrepancies between actual and expected outcome.
- D. If the defect turns out to be a bug, the tester writes a defect report and sends it to the business analyst for further investigation.
Answer: B
NEW QUESTION 27
Which one of the following combinations of given perspective and statement matches BEST?
- A. From a business perspective, computing power and architecture are major parameters for fine- tuning the system.
- B. From a user perspective, missing feedback from the system when processing a request it is a problem.
- C. From a technical perspective, the number of concurrent user and the types of transactions performed are major elements.
- D. From a business perspective, the choice of performance test tools strongly depends on the applied test techniques.
Answer: B
NEW QUESTION 28
Which one of the following acceptance criteria relates to security requirements?
- A. The system shall be web-based.
- B. The graphical user interface shall comply with corporate style guides.
- C. Normal users shall have restricted access to private data.
- D. The system's response time shall not exceed 3 seconds.
Answer: C
NEW QUESTION 29
Which one of the following scenarios characterizes UX task analysis BEST?
- A. External conditions are considered as input for subsequent design steps.
- B. Use cases are analyzed and represented through business process models.
- C. Users are qualified depending on their physical and intellectual characteristics.
- D. Inspirations from similar sectors are sought to identify successful solutions.
Answer: B
NEW QUESTION 30
Which of the following activities is most likely performed by the business analyst as part of defect analysis?
- A. Assess the impact of corrective actions on other parts of the system's implementation.
- B. Identify the requirements / user stories that are not satisfied.
- C. Check, whether other paths in the business process model perform as intended.
- D. Analyze the function that failed step by step to identify the cause of the defect.
Answer: B
NEW QUESTION 31
The standard ISO 25010 defines a quality in use model with characteristics and subcharacteristics. Which elements of the following list is a characteristic of quality in use according to this standard?
- A. Efficiency
- B. Compatibility
- C. Portability
- D. Usability
Answer: A
NEW QUESTION 32
Which of the following sentences explains BEST how business process and business rule modeling can be used for ATDD?
- A. In an ATDD approach, business process models replace acceptance criteria.
- B. In an ATDD approach, business process/rule models must be created before the project starts.
- C. In an ATDD approach, testers use business process and business rule models to generate acceptance tests.
- D. In an ATDD approach, process models are created for initial test design but are not maintained afterwards.
Answer: C
NEW QUESTION 33
......
Latest 2021 Realistic Verified CTFL-AcT Dumps: https://www.actualtests4sure.com/CTFL-AcT-test-questions.html
Pass CTFL-AcT Exam Updated 42 Questions: https://drive.google.com/open?id=1T32RjE7Bxirs_XrqRaC45bj6k4Np_53R
