SCP-NPM Dumps PDF 2023 Program Your Preparation EXAM SUCCESS
Get Perfect Results with Premium SCP-NPM Dumps Updated 77 Questions
NEW QUESTION # 33
Capacity planning is available for which metrics?
- A. Response Time, Interface, and Volume Utilization
- B. CPU, Memory, and Interface
- C. Hardware Health
- D. Up/Down, Packet Loss, and Latency
Answer: A
NEW QUESTION # 34
You deploy a new router on your network. What should you do to ensure NPM correctly interprets SNMP traps from the device?
- A. Contact the router vendor fora firmware update
- B. Update the MIB database
- C. Review your firewall rules to ensure the traps are not blocked
- D. Verify that NPM is using the correct SNMP community strings
Answer: D
NEW QUESTION # 35
You receive traps from your network devices and want to alert on a select message. How do you accomplish this?
- A. Use Traps in Orion Alerts to configure the default trap alert to fire on the trap message you select to alert on
- B. Go to the Traps view and configure a new Log Viewer rule
- C. Configure Syslog alert actions on the Alert Actions tab
- D. You cannot alert on traps through the Orion Platform
Answer: A
NEW QUESTION # 36
You need to change the polling method from ICMP to SNMP on 200 nodes you monitor with Orion. How would you best accomplish this?
- A. Unmanage all the nodes and remanage them choosing SNMP as the polling method
- B. Edit each individual node and change the polling method
- C. Bulk select nodes in Manage Nodes and change the polling method
- D. Use the Orion Polling Configuration tool to change polling methods
Answer: D
NEW QUESTION # 37
Network performance over an inter-campus Ethernet link is slow. One side of the connection is experiencing a high number of packet drops. What information in NPM can you review to help discover the cause of the issue?
- A. Routing tables on each side of the link
- B. Possible Duplex Mismatches
- C. MTU of each side of the link
- D. Packet loss on the nodes on either side of the connection
Answer: B
NEW QUESTION # 38
You want to create an alert that notifies you when packet loss meets or exceeds 50%, but only for a select set of nodes in your network. How do you accomplish this?
- A. Set the scope of the alert to only apply to nodes to be included in the alert
- B. Create separate SWQL trigger condition for each node to be included in the alert
- C. Set the alert trigger evaluation to evaluate nodes to be included in the alert
- D. Set an alert limitation for the nodes to be included in the alert
Answer: D
NEW QUESTION # 39
Users report that email is slow. The Exchange team reports that everything is normal on the mail servers. What NPM statistic can you look at to find what might be causing the issue?
- A. SMTP service on the Exchange server
- B. Mail queue length on the Exchange server
- C. Server component monitor status
- D. Network bandwidth utilization
Answer: B
NEW QUESTION # 40
You can use Device Studio to create pollers for CPU and memory?
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 41
You can display Palo Alto firewalls on Orion Maps.
- A. False
- B. True
Answer: B
NEW QUESTION # 42
NetPath can analyze paths to which network segments?
- A. All of the above
- B. Cloud Networks
- C. On-premise networks
- D. Hybrid Networks
Answer: A
NEW QUESTION # 43
Users report that NPM performance is slow when managing devices through the Orion Web Console. You verify the SNMP trapping is responsible for the poor performance. How do you resolve this issue?
- A. Reduce the number of days SNMP messages are kept in the SolarWinds Trap Viewer
- B. Point the devices to a trap manager and filter unwanted messages before forwarding remaining traps to the Orion Platform
- C. Add an Additional Web Server to handle the load of users accessing the NPM Orion Web Console
- D. Add the devices as managed nodes to cut down on the trap messages received
Answer: B
NEW QUESTION # 44
You start a new job where NPM is already in use. As soon as you are added to the alert list, you begin receiving "high traffic utilization" alerts from a handful of interfaces.
When you check the alert, the traffic spike has ended. Your new colleagues advise you to ignore these alerts because the spikes rarely last for more than a couple of minutes and are only a concern if they last longer.
How should NPM be modified so you receive fewer false alerts?
- A. Configure the alert so that it triggers only when traffic utilization remains high for a sustained period
- B. Increase the status polling frequency on the problematic interfaces
- C. Increase the statistics polling frequency on the problematic interfaces
- D. Configure the alert so that it resets only when traffic utilization remains high fora sustained period
Answer: A
NEW QUESTION # 45
You use NPM to monitor a set of physical servers. The server team decides to virtualize these servers using VMware. Which part of your virtual infrastructure will NPM no longer be able to monitor?
- A. VM sprawl monitoring
- B. Virtualization environment tree
- C. Virtualization host hardware health
- D. Virtualization host and VM performance metrics
Answer: C
NEW QUESTION # 46
The Universal Device Poller retrieves management data in which format?
- A. ANSI 1
- B. XML
- C. OID
- D. WMI
Answer: C
NEW QUESTION # 47
While building an Orion map in the NPM web console you notice that two of your devices do not show a connection between them. You verify the two devices are connected. How can you resolve this issue? (Choose all that apply.)
- A. Build a custom connection between the devices
- B. Change the monitoring method from SNMP to CLI
- C. Verify you are monitoring Layer 2 and 3 topologies
- D. Build a new Orion map and add the related entities instead of the nodes
Answer: A,C
NEW QUESTION # 48
Which is the best way to monitor an SNMP metric that NPM is not monitoring out-of-the-box?
- A. Node Management utility
- B. Update the SolarWinds MIB database
- C. Create a custom poller
- D. Enable CLI polling
Answer: C
NEW QUESTION # 49
For any node you monitor, you can use Network Discovery to automatically add child volumes or interfaces for monitoring.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 50
You have two groups of users - one in Sydney and one in Perth. How do you limit the users within the Orion Platform so they only have access to the devices in their location?
- A. Configure the Orion Web Console settings to show only devices in the user's geographical location
- B. Configure Network Atlas to show only devices in their geographical location
- C. Use the Orion Service Manager to limit user access to nodes only in their location
- D. Group devices into geographical Orion groups and use single group Account limitations to limit user access
Answer: D
NEW QUESTION # 51
After you create an NPM report with custom charts for availability and response time metrics, you schedule the report and add an action to export it. But you cannot export it as an Excel file. What is the likely reason?
- A. Excel file formats are not supported
- B. The custom charts only support a PDF export
- C. You must link the report with a URL in an email action to run live in the web console
- D. You do not have the permissions to export the report
Answer: A
NEW QUESTION # 52
Half of your objects in a nested map are down, but the top level map is up. What is the cause?
- A. You set availability thresholds for devices to below 50%
- B. You set map status thresholds to below 50%
- C. You set availability thresholds for devices to above 50%
- D. You set map status thresholds to above 50%
Answer: B
NEW QUESTION # 53
What is required to monitor tenants in your SDN environment with NPM Cisco ACI monitoring? (Choose all that apply.)
- A. View your SDN environment in Orion Maps
- B. Enable API polling on all ACI devices
- C. Add an APIC node to NPM
- D. Enable API polling on the APIC node
Answer: B,C
NEW QUESTION # 54
When you configure a report, you can limit access to specific users.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 55
You need to build an Orion Map to show the relationships and connections between your Cloud servers and on premise infrastructure. You add the nodes but discover that the Orion Platform is not automatically mapping the connection between your cloud server and on premise router. You have verified that layer 2 and layer 3 topologies are being polled on the devices. How do you resolve this issue?
- A. You need to configure a custom connection between the cloud node and the on premise node
- B. You need to open the topology ports in your firewall between the on premise node and the cloud node
- C. You need to turn off layer 2 and layer 3 topology polling for cloud monitoring
- D. You cannot monitor the connection between on premise and off premise devices
Answer: A
NEW QUESTION # 56
A custom poller has polled some results from nodes. Which of the following is a possible reason for NOT being able to show the polled results as charts on the Orion Web Console?
- A. You did not set the poller to collect historical statistics
- B. The poller is not enabled and assigned to the devices
- C. You must use Device Studio to build the poller
- D. Charts are only supported by out-of-the-box pollers
Answer: D
NEW QUESTION # 57
You inherit an environment with NPM and begin to receive High Traffic Utilization alerts from interfaces. When you view the alert, the issue is resolved. How do you modify NPM to receive fewer false alerts?
- A. Configure the alert so that it resets only when traffic utilization remains high for a sustained period
- B. Configure the alert so that it triggers only when traffic utilization remains high for a sustained period
- C. Increase the status polling frequency on the problematic interfaces
- D. Increase the statistics polling frequency on the problematic interfaces
Answer: D
NEW QUESTION # 58
......
SCP-NPM PDF Dumps Extremely Quick Way Of Preparation: https://www.actualtests4sure.com/SCP-NPM-test-questions.html
Free SCP-NPM Exam Study Guide for the NEW Dumps Test Engine: https://drive.google.com/open?id=1Pov9HzWEhZzxjAeltOo5rytTkB1Nj87r
