Unique Top-selling C1000-018 Exams - New 2021 IBM Pratice Exam
IBM Certified Associate Analyst Dumps C1000-018 Exam for Full Questions - Exam Study Guide
NEW QUESTION 20
Which graph types are available for QRadar SIEM reports? (Choose two)
- A. Trivial curve
- B. Histogram
- C. Stacked Bar
- D. Pie
- E. Frequency curve
Answer: A,C
NEW QUESTION 21
While creating a new custom property, which is a valid property types selection?
- A. Regular Expressions Based
- B. Event Based
- C. Flow Based
- D. AQL Based
Answer: B
NEW QUESTION 22
What is the reason for this system notification?
"Time synchronization to primary or Console has failed"
- A. Deny ntpdate communication on port 123
- B. Deny ntpdate communication on port 323.
- C. Deny ntpdate communication on port 223.
- D. Deny ntpdate communication on port 423.
Answer: B
NEW QUESTION 23
QRadar collects information from numerous log sources and other agents. Sometimes these agents stop reporting to QRadar for a variety of reasons. There is a default rule in QRadar to help identify these cases called the Device Stopped Sending Events (DSSE) Rule.
What does the DSSE Rule do?
- A. It listens for log sources that send out regular health events and triggers the Rule when encountered
- B. It checks for Rules which have fired due to an absence of Events.
- C. It runs when there is an absence of Events.
- D. It checks for log sources which are reporting that they have not had any communication in a certain amount of time.
Answer: D
NEW QUESTION 24
What does the Assets tab provide?
A unified view of the information that is kwon about:
- A. triggered Offenses.
- B. log sources.
- C. events and flows.
- D. network devices.
Answer: C
NEW QUESTION 25
An analyst is working on Offense management and finds that a few of the offenses are not being removed from the Offense tab even after the Offense retention period has elapsed.
What could be the reason that these offenses are not being removed?
- A. Offense is protected
- B. Offense is released
- C. Offense is inactive
- D. Offense has been annotated
Answer: C
NEW QUESTION 26
An analyst notices that there are a number of invalid Offenses being created from a network node. This node has been determined to be in Domain 2 and has the following log sources sending it events: (3Com 8800 Series Switch from 172.18.1.1, Cisco ACE Firewall from 172.18.1.2, FireEye from 172.18.1.3, and Palo Alto PA Series from 172.18.1.8).
The analyst should create a False Positive Building Block that has a filter:
- A. "when the remote IP is one of the following 172.18.1.1, 172.18.1.2. 1.3 172. 18.18.1.8
- B. "when the destination IP is in 172.18.0.0/16"
- C. "when the local network is Domain 2 and when the source IP is in 172.18.0.0/16"
- D. "when the local network is Domain 2 and when the source IP is in 172.18.0.0/16"
Answer: D
NEW QUESTION 27
An analyst wants to analyze the long-term trending of data from a search.
Which chart would be used to display this data on a dashboard?
- A. Scatter Chart
- B. Bar Graph
- C. Time Series chart
- D. Pie Chart
Answer: D
NEW QUESTION 28
To provide insight into why QRadar considers the event to be threatening, what does QRadar add to the Offense that users cannot edit or delete?
- A. Location
- B. Source IP
- C. Annotations
- D. Attack path
Answer: C
NEW QUESTION 29
What is required to create an anomaly rule?
- A. triggered flows
- B. baseline anomalies
- C. a grouped saved search
- D. triggered events
Answer: D
NEW QUESTION 30
How does an analyst view the base64 encoded string of an event's raw payload that contains unprintable characters?
- A. Admin -> Under Payload Information, click base64 tab
- B. Log Activity -> Under Payload Information, click base64 tab
- C. Right click on the event -> view base64 data
- D. Copy the raw payload and use an external tool to view base64 data
Answer: C
NEW QUESTION 31
How does an analyst view which rule triggered an Offense in the Offense summary page?
- A. Actions -> View Rules
- B. Display -> Triggered Rules
- C. Display -> Rules
- D. Actions -> Display Rules
Answer: C
NEW QUESTION 32
An analyst is investigating access to sensitive data on a Linux system. Data is accessible from the /secret directory and can be viewed using the 'sudo oaf command. The specific file /secret/file_08-txt was known to be accessed in this way. After searching in the Log Activity Tab, the following results are shown.
When interpreting this, the analyst is having trouble locating events which show when the file was accessed.
Why could this be?
- A. The 'LinuxServer @ centos' log source has coalescing configured and the specific event for that file can only be accessed by clicking on the 'Event Count' value.
- B. The 'LinuxServer @ centos' log source has not been configured to send the relevant events to QRadar.
- C. The 'LinuxServer @ cantos' log source has boon configured as a Faise Positive and the specific event for that file has been dropped.
- D. The ;LinuxServer @ centos; log source has coalesscing conigured and the specific event for that file has been discardedd.
Answer: C
NEW QUESTION 33
Which component in QRadar collects and creates flow information?
- A. sflow
- B. Qflow
- C. J-Flow
- D. NetFIow
Answer: B
Explanation:
Explanation
https://www.ibm.com/support/pages/qradar-about-flows-and-difference-between-qflow-collector-and-qradar-eve
NEW QUESTION 34
An analyst needs to identify which rules are most active in generating Offenses.
In the Offense tab, on the rules section, which column must be reordered in descending order to find this information?
- A. Response count
- B. Offense count
- C. Event count
- D. Flow count
Answer: A
NEW QUESTION 35
How can an analyst verify if any host in the deployment is vulnerable to CVE ID; CVE-2010-000?
- A. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: $2010-000
- B. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: 2010-000
- C. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: $CVE-2010000
- D. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: CVE-2010000
Answer: B
Explanation:
Explanation
You receive a notification that CVE ID: CVE-2010-000 is being actively used in the field. To verify whether any hosts in your deployment are vulnerable to this exploit, you can select Vulnerability External Reference from the list of search parameters, select CVE, and then type the 2010-000 To view a list of all hosts that are vulnerable to that specific CVE ID
https://www.ibm.com/docs/en/SS42VS_7.3.2/com.ibm.qradar.doc/b_qradar_users_guide.pdf
NEW QUESTION 36
What happens to a Closed Offense after the offense retention period which defaults to 30 days7
- A. It is manually deleted by the administrator
- B. It is automatically archived.
- C. It is deleted from the system.
- D. It is hidden from view.
Answer: B
NEW QUESTION 37
When an Offense is triggered, it only shows the events that triggered the Offense. The analyst wants to investigate further to see more events around the incident, not only those that triggered the Offense. The analyst clicks on the event count and sees the events belonging to the Offense.
How can the analyst processed to see a more detailed picture of what occurred?
- A. Right-click and filter on the Destination IP.
- B. Right-click on the destination IP, and choose More Options, then Raw Events.
- C. Right-click on the source IP, and choose More Options, then Information, and then Search Events
- D. Right-click on the source IP, and choose View in DSM Editor.
Answer: C
NEW QUESTION 38
How would an analyst Interpret this QRadar notification: "SAR Sentinel: threshold crossed?"
- A. The Custom Rule Engine is currently detecting a distributed denial of service attack.
- B. The system disk usage is above the threshold and must be reduced to avoid potential data loss.
- C. The system load is above the threshold and can experience reduced performance.
- D. The anomaly detection engine has detected volume of failed logins above the threshold.
Answer: B
NEW QUESTION 39
An analyst is performing an investigation regarding an Offense. The analyst is uncertain to whom some of the external destination IP addresses in List of Events are registered.
How can the analyst verify to whom the IP addresses are registered?
- A. Right-click on the destination address, More Options, then Information, and then DNS Lookup
- B. Right-click on the destination address, More Options, then IP Owner
- C. Right-click on the destination address, More Options, then Information, and then WHOIS Lookup
- D. Right-click on the destination address, More Options, then Navigate, and then Destination Summary
Answer: D
NEW QUESTION 40
Where can an analyst investigate a security incident to determine the root cause of an issue, and then work to resolve it?
- A. Network Activity tab
- B. Risk tab
- C. Offense tab
- D. Vulnerabilities tab
Answer: D
NEW QUESTION 41
How does the Custom Rule Engine (CRE) evaluates rules?
- A. It runs stateless tests first, then runs stateful tests and evaluates the result.
- B. It runs rule tests line-by-line in order, and continues while tests are true.
- C. It runs all rule tests at the same time, and evaluates the result after all tests are complete
- D. It runs tests based on the criticality of the test, running the critical ones first.
Answer: A
NEW QUESTION 42
......
Best way to practice test for IBM C1000-018: https://www.actualtests4sure.com/C1000-018-test-questions.html
