Avaya Aura(TM) Communication Manager and CM Messaging (R6.0) Implementation Exam

Question 1

A user at a remote branch location is registered to a G450 media Gateway connected via processor Ethernet (PE) to a main communication manager in the core. The report that they are no longer able to place calls to users at the core
Which three procedures can be used to diagnose the source of problem? (Choose three)

A. Use the show MGC command on the media gateway to confirm the IP address of the PE enabled server at the core is administered as the primary controller of the media gateway.

B. Confirm that the registered field on the communication Manager Display media-gateway to Y.

C. Conform that the PE interface is active by executing the communication manager display processor Ethernet command and confirm that the allow H.248 Gateway field is set to Y.

D. Use the list survivable processor command to confirm that the survivable server is registered to the main communication manager.

E. Use the list registered -IP-station command on the communication manager to determine whether the user on the media gateway is registered.

Correct Answer: B,D,E

Question 2

A technician is asked to retrieve a maintenance log for CMM that shows the information for 8"00 AM to 5:00 PM local tome that day.
Which shell command should be executed to retrieve the maintenance log?

A. Print-1 maint -d 08:00 10/10/10

B. Displog-1 maint -d 10/10/10 08:00

C. Show main log 0800 101010

D. Print log for maint 101010 08:00

Correct Answer: A

Question 3

A customer has a communication Manager R6.0 system with IP phones and some older TDM phone, and says there is no dial tone for all of the IP phones. All of the hardware has been verified to be working properly.
Which two steps can be taken to identify the cause of problem? (Choose two)]

A. Set a static IP address on a laptop and see if the TN2602 Media Resource circuit pack can be pinged.

B. Set a static IP address on a laptop and see if the server can be pined

C. Verify that the TN2602 Media resources circuit pack has the correct IP settings.

D. Verify that the processor Ethernet mode is enabled in the Server.

Correct Answer: A,C

Question 4

Which three commands are port of Avaya Aura CM_survRemote_Embed templates?
(Choose three)

A. AES 6.0

B. CMM 6.0

C. Session manager

D. Utility services

E. CM 6.0

Correct Answer: C,D,E

Question 5

In the navigation pane, what are the steps to create a test mailbox on the Communication manager messaging 6.0 Application?

A. Select Forms control, and then at the command line run then add subscribe command.

B. Select messaging administration, Select messaging administration, and then click add.

C. Select messaging administration, the click new.

D. Select messaging administration, then Subscribe Management, and then click Add or
edit.

Correct Answer: D

Question 6

Which statement describes how the communication message application is enabled the first time after the installation?

A. Communication manager messaging is enabled by default after the installation.

B. Open the communication manager IP address using web browser. Login as craft, click installation, than communication manager messaging.

C. Connect the SAT terminal login using the craft, and then enable using the enable messaging command.

D. Open the communication manager IP address using web browser. Login as craft; click Administration, then server (maintenance), than click miscellaneous, than messaging software, and than click enable.

Correct Answer: A

Question 7

Which screen is used while upgrading the system platform from release 6.0.0.09 to release 6.0.0.11?

A. Console domain Server Management Path management

B. Console domain Virtual Machine Management

C. Communication manager Web interface

D. Console domain Server Management Platform Upgrade

Correct Answer: D

Avaya Aura(TM) Communication Manager and CM Messaging (R6.0) Implementation - 6002.1 Exam Practice Test

Latest Update

Useful Links

Contact Us