NACE-CIP1-001 Exam PDF [2024] Tests Free Updated Today with Correct 100 Questions
NACE NACE-CIP1-001 Exam Preparation Guide and PDF Download
NEW QUESTION # 42
Which one of the following documents is the best source for coating technical data:
- A. Technical Data Sheet
- B. Specification
- C. Application Guidelines
- D. Safety Data Sheet;
Answer: A
NEW QUESTION # 43
In the event of a conflict between the project specification and the coating manufactures' product data sheet, the Inspector's first course of action should be too:
- A. Call the coating manufacturer for clarification
- B. Use the product data sheet as a guide
- C. Call the person who wrote the specification for clarification
- D. Use the job specification as a guide
Answer: D
NEW QUESTION # 44
A magnetic pull-off type gauge is a good choice when:
- A. Accuracy is not required
- B. Performing an adhesion test
- C. When an intrinsically safe tool is required
- D. When working on non-ferrous metals
Answer: C
NEW QUESTION # 45
Checking is
- A. a fine crack in the surface of a coating that rarely reaches the substrate
- B. surface breaks in the film that often result from grease or oil contamination and revel the substrate.
- C. an exposed area of the substrate or previous coat material, caused by poor application technique.
- D. a very small hole in a coating caused when air or solvent is trapped in porous film and then escapes.
Answer: A
NEW QUESTION # 46
Whenever dissimilar metals must join, the most common practice is to
- A. coat all connected dissimilar metals.
- B. provide anodic protection to prevent corrosion.
- C. avoid coating all connected dissimilar metals.
- D. provide cathodic protection to prevent corrosion,
Answer: A
NEW QUESTION # 47
To achieve consistently accurate results with ALL alt test equipment
- A. calibrate the instrument in the field.
- B. wash your hands before sampling.
- C. avoid placing the sample discs on a surface.
- D. wear gloves when sampling.
Answer: B
NEW QUESTION # 48
If the specifier does not identify a restriction level in accordance with SSPC PA 2, the default restriction level is:
- A. Level 1
- B. Level 2
- C. Level 3
- D. Level 4
Answer: C
NEW QUESTION # 49
ISO SA 2.5 is defined as:
- A. Light Blast Cleaning
- B. Very Thorough Blast Cleaning
- C. Thorough Blast Cleaning
- D. Near White Metal Blasting
Answer: B
NEW QUESTION # 50
Most industrial coatings are:
- A. Inorganic
- B. Organic
- C. Resistant to concentrated sulfuric acid
- D. Resistant to temperatures above 200C
Answer: B
NEW QUESTION # 51
NACE Level 1 Inspectors have been trained to perform:
- A. Visual inspection only
- B. All types of inspection
- C. Visual inspection and Non-destructive testing
- D. Visual inspection, Non-Destructive and Destructive testing
Answer: C
NEW QUESTION # 52
The Inspector's Log Book is generally:
- A. Shared with all parties upon project completion
- B. Submitted to the client upon project completion
- C. Retained by the inspector upon project completion
- D. Shredded by the inspector upon project completion
Answer: C
NEW QUESTION # 53
Passivation can best be described as:
- A. Complete elimination pf the corrosion process
- B. A coating layer applied to the surface to inhibit corrosion
- C. Treating metal with a liquid inhibiter
- D. A protective metallic oxide surface layer that slows corrosion
Answer: D
NEW QUESTION # 54
You are an inspector on a project where SSPC SP 3 is specified.
What sort of tools should you expect the Contractor to use to achieve the standard?
- A. Hand tools
- B. Airless spray equipment
- C. Abrasive blast nozzles
- D. Power tools
Answer: D
NEW QUESTION # 55
If the project specification DOES NOT state the specific DFT measurement standards, the inspector should use
- A. NACE 2/SSPC SP10
- B. a detailed checklist and document the lack of a standard.
- C. their best judgment based on similar projects and specifications.
- D. a recognized industry standard like SSPC-PA 2 that is broadly accepted
Answer: D
NEW QUESTION # 56
ISO SA 3 is directly equivalent to:
- A. NACE No. 2/SSPC SP 10
- B. NACE No. 1/SSPC SP 5
- C. NACE No. 3/SSPC SP 6
- D. None of the above
Answer: D
NEW QUESTION # 57
How many gauge readings does SSPC-PA 2 require within a 4 cm (1.5 inch) diameter circle?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 58
An exposed area of the substrate or previous coat of a conductive coating material, often caused by poor application technique is called
- A. sagging.
- B. holiday.
- C. checking.
- D. cracking.
Answer: B
NEW QUESTION # 59
A successful coating inspector must be able to
- A. apply the coating with expert accuracy.
- B. advise the coating applicator on how to mix the coating.
- C. look for problems or issues during application.
- D. recommend the appropriate coating technique for the job to the contractor.
Answer: C
NEW QUESTION # 60
......
Verified & Correct NACE-CIP1-001 Practice Test Reliable Source Oct 19, 2024 Updated: https://www.actualtests4sure.com/NACE-CIP1-001-test-questions.html
Free NACE NACE-CIP1-001 Exam Files Downloaded Instantly: https://drive.google.com/open?id=1iXP0ROGNHQe_jO1x6KsdXbg_Nt-rDdXP
