[Oct-2021] Juniper JN0-230 Dumps - Secret To Pass in First Attempt
Juniper JN0-230 Exam Dumps [2021] Practice Valid Exam Dumps Question
How much JN0-362 Exam Cost
The price of the JN0-362 exam is $350 US-
Juniper JN0-230 Exam Certification Details:
| Recommended Training | Introduction to Juniper Security |
| Exam Name | Security Associate |
| Sample Questions | Juniper JN0-230 Sample Questions |
| Duration | 90 minutes |
| Exam Registration | PEARSON VUE |
| Passing Score | Variable (60-70% Approx.) |
| Exam Code | JN0-230 JNCIA-SEC |
| Exam Price | $200 USD |
| Number of Questions | 65 |
NEW QUESTION 39
Which two statements are true about UTM on an SRX340? (Choose two.)
- A. No default UTM policy is created
- B. A default UTM policy is created.
- C. A default UTM profile is created
- D. No default profile is created.
Answer: C,D
NEW QUESTION 40
A new SRX Series device has been delivered to your location. The device has the factory-default configuration loaded. You have powered on the device and connected to the console port.
What would you use to log into the device to begin the initial configuration?
- A. Root with a password of juniper''
- B. Admin with password
- C. Root with no password
- D. Admin with a password ''juniper''
Answer: A
NEW QUESTION 41
You configure and applied several global policies and some of the policies have overlapping match criteria.
- A. The first matched policy is the only policy applied.
- B. The most restrictive that matches is applied.
- C. In this scenario, how are these global policies applies?
- D. The least restrictive policy that matches is applied.
Answer: C
NEW QUESTION 42
Which two match conditions would be used in both static NAT and destination NAT rule sets? (Choose two.)
- A. Source zone
- B. Source interface
- C. Destination interface
- D. Destination zone
Answer: C,D
NEW QUESTION 43
Which two private cloud solution support vSRX devices? (Choose two.)
- A. VMware NSX
- B. VMware Web Services (AWS)
- C. Contrail Cloud
- D. Microsoft Azure
- E. Amazon Web Services (AWS)
Answer: B,D
NEW QUESTION 44
Which flow module components handles processing for UTM?
- A. Policy
- B. Services
- C. Screen options
- D. Zones
Answer: B
NEW QUESTION 45
Which two statements are true about security policies in the factory-default configuration of an SRX340?
(Choose two.)
- A. All interzone traffic is allowed.
- B. All interzone traffic is denied.
- C. All traffic from the untrust zone to the trust zone is denied.
- D. All traffic from the trust zone to the untrust zone is allowed.
Answer: C,D
NEW QUESTION 46
Which Statement is correct about Sky ATP?
- A. Sky ATP is a local hardware-based security threat analyzer that performs multiple tasks.
- B. Sky ATP relies on the SRX series device to open and analyze suspect file attachments
- C. Sky ATP can provide live threat feeds to SRX series devices
- D. The local Sky ATP platform downloads the latest threat from managed site
Answer: C
NEW QUESTION 47
Exhibit.
Which statement is correct regarding the interface configuration shown in the exhibit?
- A. The IP address is assigned to unit 0.
- B. The IP address has an invalid subnet mask.
- C. The interface is assigned to the trust zone by default.
- D. The interface MTU has been increased.
Answer: A
NEW QUESTION 48
You are configuring an IPsec VPN tunnel between two location on your network. Each packet must be encrypted and authenticated.
Which protocol would satisfy these requirements?
- A. SHA
- B. AH
- C. ESP
- D. MD5
Answer: C
NEW QUESTION 49
Which statements is correct about global security policies?
- A. Global policies allow you to regulate traffic with addresses and applications, regardless of their security zones.
- B. Global policies eliminate the need to assign interface to security zones.
- C. Global security require you to identify a source and destination zone.
- D. Traffic matching global is not added to the session table.
Answer: C
NEW QUESTION 50
On an SRX Series device, how should you configure your IKE gateway if the remote endpoint is a branch office using a dynamic IP address?
- A. Configure the IPsec policy to use MD5 authentication.
- B. Configure the IPsec policy to use aggressive mode.
- C. Configure the IKE policy to use a static IP address.
- D. Configure the IKE policy to use aggressive mode.
Answer: D
NEW QUESTION 51
Click the Exhibit button
Which two user roles shown in the exhibit are available be defaults? (choose two)
- A. Operator
- B. Jtac
- C. Super-user
- D. Admin
Answer: A,C
NEW QUESTION 52
Your company has been assigned one public IP address. You want to enable Internet traffic to reach multiple servers in your DMZ that are configured with private IP addresses.
In this scenario, which type of NAT would be used to accomplish this task?
- A. destination NAT
- B. NAT without PAT
- C. source NAT
- D. static NAT
Answer: C
NEW QUESTION 53
What should you configure if you want to translate private source IP address to a single public IP address?
- A. Content filtering
- B. Security Director
- C. Source NAT
- D. Destination NAT
Answer: B
NEW QUESTION 54
......
Test Prerequisites
There are no mandatory requirements for attempting the Juniper JN0-230 exam. However, familiarity with the key exam objectives is highly recommended.
JN0-230 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://www.actualtests4sure.com/JN0-230-test-questions.html
